| |
You are making an offer on a DCI 316 Stainless Steel 50 Gallon Jacketed Tank with Mixer located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Please Note: This machine is still installed at the seller's facility. A scope of work agreed to by the seller may be required before any removal operations can begin.
DCI 316 Stainless Steel 50 Gallon Jacketed Tank with Mixer National Board # 910Vessel MAWP 150/-15 psi @ 450 Degrees FJacket MAWP 85 psi @ 350 Degrees FJacket Volume 0.5 GallonsFlat Bottom with Center DischargeBolt Down Dome TopSide Mounted ThermocoupleSight Glass on Top with 6 InletsMounted on Load Cells with Digital Readout- Manufacturer DCI
- Year 1986
- Serial Number 87PH34762
- National Board # 910
- Capacity Size 50 GALS
- Spare/Change Parts N
- Inlets/Outlets Yes
- Top and Bottom Heads DISHED TOP/FLAT BOTTOM
- Agitation Y
- Manual Available No
- Estimated Shipping Weight 750 LBS
- Maintenance Log/Records Available N
- MSDS Available N
- Temperature 450 DEG F
- Length 4 FT
- Width 4 FT
- Height 7 FT
- Voltage 120 VOLTS
- Frequency 60 HERTZ
- Phase 1
- Pressure Rating (Temperature) 450 F
- Pressure Rating (Pressure) 150
- Material of Construction 316 STAINLESS STEEL
- Removal Difficulty MODERATE
- Requires rigging or removal YES
- Requires a flatbed truck NO
- Level of shipment preparation necessary STILL INSTALLED
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Pennsylvania
Dimensions: 4x4x7 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store