| |
You are making an offer on a Douglas / Davis Engineering 12/24 Tray Packer located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Model: 12/24
Serial #: 1753
Electrics: 480volt, 60hz, 3ph, 30amp
Control voltage: 24volt DC
Air requirement: 80psi @ 1.5cfm
Date of manufacture: 2/23/1999
Maximum speed: 24 trays per minute
Four lane product infeed
infeed lanes split in two
Trays are erected in the center of the machine with both ends left open
Product is side loaded into the trays from both ends
Ends are glue sealed
Missing glue system, unit has glue hoses and guns
Approximate overall dimensions: 28'long x 7'wide x 100"high
- Manufacturer Douglas
- Year 1999
- Model 12/24
- Serial Number 1753
- Capacity Speed
- Estimated Shipping Weight 6,000
- Length 28 FT
- Width 7 FT
- Height 100 IN
- Voltage 460 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Current 30 AMPS
- Removal Difficulty EASY
- Trays/Minute unknown
- Corner Style GLUE
- Packages/Minute unknown
- Package Shape bottles
- Method CONTINUOUS MOTION
- Packing Method SIDE LOAD
- Requires rigging or removal YES
- Requires a flatbed truck NO
- Level of shipment preparation necessary UNCRATED/LOOSE
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Wisconsin
Dimensions: 28x7x100 IN
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store