| |
You are making an offer on an Elmach EPI - 2500 Blister Machine / Thermoformer located in India. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Model: EPI - 2500
Edge to edge print registration saving 6mm of foil between packs
Inbuilt PLC for print registration control
Seperate embossing and / or perforation stations
Pick and place for downstream automation
Full stainless steel body
Recipe program through man - machine interface
PVC base film: maximum 218mm
PVC film thickness: .025mm
PVC reel diameter: maximum 440mm
Aluminium foil width: maximum 214mm
Aluminium foil thicknes: .0.2 to 0.03mm
Aluminium reel diameter: 220mm
Minimum forming area: 25mm x 210mm
Maximum forming area: 102mm x 200mm
Advance length: 110mm
Pack length punched out: 210mm
Pack width punched out: 110mm
Maximum forming depth: 16mm
Approximate output: 300 blisters per minute (depending on application)
- Manufacturer Elmach Packages (India) Pvt Ltd
- Model EPI - 2500
- Capacity Speed 300 BPM
- Spare/Change Parts UNKNOWN
- Estimated Shipping Weight 1500 KGS
- Length 103 IN
- Width 48 IN
- Height 85 IN
- Removal Difficulty EASY
- Removal difficulty notes Removal difficulty is not known
- Requires rigging or removal UNKNOWN
- Requires a flatbed truck UNKNOWN
- Level of shipment preparation necessary STILL INSTALLED
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
India
Dimensions: 103x48x85 IN
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
