| |
You are making an offer on a Hassia Form, Fill & Seal Packaging Line located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Please Note: This machine is still installed at the seller's facility. A scope of work agreed to by the seller may be required before any removal operations can begin.
Form, Fill & Seal Packaging Line, Includes the Following:
Hassia 8 Head Form Fill & Seal Machine, Model SVL20/30, S/N 110350 Lifting Hoist for Packaging FilmRoll FedMedtronic 8 Head Hot Stamper for Lot Number/Exp DatePouch Material Thickness (approx) 3.3 milPouch Reel Diameter 800mm maxCore Diameter 152 mmMachine was Filling Flavored Applesauce at 200 Degrees FDensity 1.2kgs/DM3Fill Quantity 60ml/2.5oz weightFormat 38 x 210mmPromecon H PLC ControlsSplice DetectionPrint Mark ControlLongitudinal CuttingWeb Material Return LockForming StationLongitudinal Sealing StationTake Off DeviceCross Separation & PerforationPouch Holding Device & Flap FinEmpty Pouch Discharge & ChutePlexiglass Guarded with Electrical Safety InterlocksThese Pouches have a Back Lap Seal (no Sharp Edges)Machine Speed 50 Cycles per Minute x 8 = 400 per MinutePackages Discharge onto a Arrowhead Bucket Conveyor/Elevator and Transported onto a Arrow Conveyor with a Serpentine Conveyor to Bring the Pouches to the Level of the Cooling Tunnel Infeed Conveyor
Busse/SJI/Arrowhead Container Handling Systems Cooling Tunnel4 Zones, Each Zone with its own Centrifugal Pump for Circulation of Chilled Water. The Last Section of the Tunnel has Blowers to Blow Dry the Pouches prior to Cartoning, Model # 4/92 Cooler, S/N 308962101APV Heat Exchanger which Supplies Chilled Water to the TunnelThere is a 21' Long Arrowhead Discharge Conveyor before the Serpintine Conveyor which brings the Pouches down to the Conveyor Infeed Level of the Cartoner
Elliott CH-2 Cartoner, S/N 01-8-20Bucket Loader Places 8 Pouches into Each Carton @ Up to 300 CPMNordson Series 3500V Hot Melt Glue ApplicatorConveyorized Empty Carton MagazineDischarge BeltsCarton Size Range: Length - 1" to 8", Width - 1/2" to 3", Depth - 2 1/2" to 13 1/2" Electrical: 3HP Variable Speed Drive Motor, 230-460 Volts, 3 Phase, 60 Hz. Nema 12There is a 90 Degree Arrowhead Conveyor at the Cartoner Discharge
Mettler Toledo/Hi Speed MicroMate Check Weigher, Model MM, S/N S010174-2A, Includes a Safeline Metal Detector, S/N 49768Rated @ 65 Ft/Min with a Package Weight of 597.8 Gms- Manufacturer Various
- Year 2001
- Products Run Out of Service
- Voltage 460 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Removal Difficulty MODERATE
- Estimated Shipping Weight 50000 LBS
- Capacity Speed 400 PPM
- Requires rigging or removal YES
- Requires a flatbed truck YES
- Level of shipment preparation necessary STILL INSTALLED
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
USA
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store