| |
You are making an offer on a MG2 -G250 Rotary Encapsulation Machine, "NEVER USED". This item is surplus to the ongoing operations of a manufacturing facility in TN. This and other lots from this location are now available because the facility needs to make room for manufacturing capacity. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
MG2 -G250 Rotary Encapsulation Machine Size "4" Change PartsCFM AspiratorStainless Steel Vacuum SkidPlexiglass Swing Out DoorsSwing Out Control PanelProducts that can be run on machine are Powder, Pellets, Microtablets, Tablets & Low Dosages of Powder to be InhaledChange Parts would be required for these special applications other than powderThis machine can dose: powders, pellets (up to two different kinds in the same capsule), micro-tablets, tablets and different combinations among them
Can handle all capsule sizes from 000 to 5, including tamper-proof capsulesEquipped with an industrial PC with colour monitor with Windows NT and an operator-friendly interface to control machine functionsOn request, it can be fitted with the following weight control systemsMod. SWC/S automatic capsule sampling weight check with machine stopMod. SWC automatic capsule weight control with automatic adjustment of the
dosing chambers without machine stopMod. NETT net weight control of all the filled capsules built into the capsule filler
When fitted with SWC or NETT, it can be connected to a computerised supervision systemOptional devices can be fitted to this machine to make it suitable for "lights out operatioins".
Please Note: Machine was purchased new in 2003 for $1,000,000.00 and never uncrated or put into production.- Manufacturer MG America
- Year 2003
- Model MG2-250
- Serial Number 4904
- Capacity Speed 200000 PPH
- Products Run Never Uncrated or Installed
- Spare/Change Parts N
- Air Requirements 6.5 BAR
- Manual Available Yes
- Estimated Shipping Weight 2900
- Maintenance Log/Records Available N
- MSDS Available N
- Length 15 FT
- Width 10 FT
- Height 8 FT
- Voltage 460 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Removal Difficulty READY TO SHIP
- Requires rigging or removal NO
- Requires a flatbed truck UNKNOWN
- Level of shipment preparation necessary UNCRATED/LOOSE
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Tennessee
Dimensions: 15x10x8 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
NOTE: Because this listing is a tabletting machine or encapsulation machine, the seller will need to notify the DEA of any transaction involving this machine. They will need to supply the DEA with the Model, Serial number, the buyer company, contact, address, telephone and fax number, and the buyer's tax ID or DEA registration number. The DEA requires 15 business days after payment has been received for this notification to occur before the press can be released for shipment. If you intend to make an offer on this machine you will be required to provide your company's Tax ID or DEA Registration #.
|
