EquipNet, Inc.
MarketPlace  |   Auctions  |   Tech Solutions  |   APPRAISALS  |   My EquipNet  |   Services

Search for Equipment
Advanced Search

Email this page

Wanted Equipment
ListAsset DescriptionCategoryDo you have it?
W472976Maye Validator 2000 temperature calibratorTemperature ControllersI Have It
W47279810 cubic foot Double cone blender for R&D project BlendersI Have It
W472794Client is looking for a Buchi Rotor Evaporator System. Evaporator model R100 the controller model V850 and the pump model V700EvaporatorsI Have It
W472793Millipore Milliflex 100 Test System with Single Head PumpAnalyzersI Have It
W472784Agilent 2100 BioAnalyzerAnalyzersI Have It
W472752Vacuum Drying oven that is capable of drying 40kg at a time Drying OvensI Have It
W472748looking for a small 5-15ml XP filler to fill nail polish into small glass bottles, only looking to semi-automate the process right, slow speeds necessary. About 2-3 per minute FillersI Have It
W472746Pilot Scale Capsule Bander  I Have It
W472739Table Top spray dryer Buchi B-290 spray dryer Spray DryersI Have It
W4727382-5 liter glass lined reactorReactorsI Have It
W472723Needs a 150L Stainless Steel Jacketed tank, with RA20 Internal Finish, rated for 45 PSI/FV internally, and 125 PSI in the jacket. Needs to have a bottom MAG drive, has to be a VFD.TanksI Have It
W472626 Order picking stacker truck ( Still Wagner type or equivallent type ) ◾Capacity: 1500 kg ◾Lift height: up to 7 m ◾Nominal battery capacity: 225 Ah to 525 Ah ◾Travel speed (km/h) : variable ◾Highly customized and intelligent systems technology ◾Perfect efficiency ◾Absolutely fail-safe ◾Higher performance and at the same time lower energy costs ◾High reliability and availability of storageFork Lift TrucksI Have It
W4726254000L ' '- All tanks shall be designed and manufactured as per GMP guidelines and comply with ASME (BPE) and ASME section VIII, Div 1 standards - Chamber shall be made of sanitary stainless steel AISI 316L material and jacket is manufactured from stainless steel AISI 304 - All whetted surfaces are internally electro-polished up to 0.4 Ra finish - Electrical immersion heaters / ceramic heaters in the jacket - Plain, dual jacketed tanks provided with suitable insulation and stainless steel AISI 304 cladding - Flush nozzles are provided to ensure minimum dead lag - Necessary accessories as follows ; • spray balls • electrical heat traced vent filter housing with 0.2 micron hydrophobic vent filter • compound pressure gauge • temperature transmitter • level switch & level controller • rupture disk - Material testing certificate TanksI Have It
W472624'- Microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers - Designed, Tested, Rated and Certified in accordance with the following Standards and Codes 1. AHRI 550/50 Water Chilling Packages Using the Vapor Compression Cycle 2. AHRI 30 Sound Rating of Large Outdoor Refrigerating and Air-Conditioning Equipment 3. ANSI/ASHRAE 15 Safety Code for Mechanical Refrigeration 4. ANSI/ASHRAE 34 Number Designation and safety classification of refrigerants - Chiller shall be pressure-tested, evacuated and fully charged with refrigerant and oil, and shall be factory operational run tested with water flowing through the vessel. - Complete system with multiple independent refrigerant circuits - Refrigerant suction-gas cooled accessible hermetic compressor motor - Semi hermetic twin screw compressors, shell and tube hybrid falling film type evaporator - Air cooled condenser - R134A refrigerant, classified as safety group A1 according to ASHRAE 34 - Lubrication system - Safety and operating controls including capacity controller - Control center - Motor starting components - Provide automatic control of chiller operation including compressor start/stop and load/unload, anti-recycle timers, condenser fans, evaporator pump, evaporator heater, unit alarm contacts and run signal contacts.ChillersI Have It
W472623'- Microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers - Designed, Tested, Rated and Certified in accordance with the following Standards and Codes 1. AHRI 550/50 Water Chilling Packages Using the Vapor Compression Cycle 2. AHRI 30 Sound Rating of Large Outdoor Refrigerating and Air-Conditioning Equipment 3. ANSI/ASHRAE 15 Safety Code for Mechanical Refrigeration 4. ANSI/ASHRAE 34 Number Designation and safety classification of refrigerants - Chiller shall be pressure-tested, evacuated and fully charged with refrigerant and oil, and shall be factory operational run tested with water flowing through the vessel. - Complete system with multiple independent refrigerant circuits - Refrigerant suction-gas cooled accessible hermetic compressor motor - Semi hermetic twin screw compressors, shell and tube hybrid falling film type evaporator - Air cooled condenser - R134A refrigerant, classified as safety group A1 according to ASHRAE 34 - Lubrication system - Safety and operating controls including capacity controller - Control center - Motor starting components - Provide automatic control of chiller operation including compressor start/stop and load/unload, anti-recycle timers, condenser fans, evaporator pump, evaporator heater, unit alarm contacts and run signal contacts.ChillersI Have It
W472622'- Microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers - Designed, Tested, Rated and Certified in accordance with the following Standards and Codes 1. AHRI 550/50 Water Chilling Packages Using the Vapor Compression Cycle 2. AHRI 30 Sound Rating of Large Outdoor Refrigerating and Air-Conditioning Equipment 3. ANSI/ASHRAE 15 Safety Code for Mechanical Refrigeration 4. ANSI/ASHRAE 34 Number Designation and safety classification of refrigerants - Chiller shall be pressure-tested, evacuated and fully charged with refrigerant and oil, and shall be factory operational run tested with water flowing through the vessel. - Complete system with multiple independent refrigerant circuits - Refrigerant suction-gas cooled accessible hermetic compressor motor - Semi hermetic twin screw compressors, shell and tube hybrid falling film type evaporator - Air cooled condenser - R134A refrigerant, classified as safety group A1 according to ASHRAE 34 - Lubrication system - Safety and operating controls including capacity controller - Control center - Motor starting components - Provide automatic control of chiller operation including compressor start/stop and load/unload, anti-recycle timers, condenser fans, evaporator pump, evaporator heater, unit alarm contacts and run signal contacts.ChillersI Have It
W472621'- Completely oil-free type air compressor - Variable Speed Drive (VSD) type compressors - Easy and low cost installation and a quick start-up - Rotary Screw compressor type - Water cooled or air cooled type - Energy-free MD dryers and Energy recoveryAir CompressorsI Have It
W472620'- Completely oil-free type air compressor - Variable Speed Drive (VSD) type compressors - Easy and low cost installation and a quick start-up - Rotary Screw compressor type - Water cooled or air cooled type - Energy-free MD dryers and Energy recoveryAir CompressorsI Have It
W472619'- Design pressure : 11 barg ( 150 psig ) - Steam operating pressure : 7.0 barg ( 100 psig ) - Fuel : gas type  I Have It
W472618'- Material: SS316L - Surface finish: inside surface is Ra 0.28~0.6μm by mechanical polish. - Outside surface is Ra 0.6~0.8μm by satin finish. - Agitator: bottom magnetic agitator - Pressure: -0.1~3 bar for both chamber & jacket - Structure: vessel with jacket and insulation - Jacket type: dimple jacket - Insulation material: rock wool covered by SS - Components: vent filter, temperature sensor, level meter, manhole, sight glass with lamp, spray balls, rupture disk, diaphragm valves, bottom drain valve, diaphragm pressure gauge, etc - Fixed type with load cells mounted - Control cabinet - Manufacture standard for pressure vessel: ASME - ASME certificate and documents Mixers/AgitatorsI Have It
W472617Pure Steam Generator Pure sterile pyrogen free pure steam conforming to USP standards. - Compact in design & mounted on the skid - All contact Parts are made of SS 316 L. - Electro polished creviceless inner contact surfaces. - Sanitary triclover fittings for quick and easy preventive maintenance - Double Tube Sheet construction for the first column, where boiler steam is present. - Synoptic panel board with facility for logging the data. - Automatic operation of the system in accordance with Pure Steam demand. Generator shall be designed in the form of a column, with the heat exchanger at the bottom and the expansion chamber above, which guarantees dry and saturated steam, free from droplets, which fall due to the effect of gravity. The impurities are eliminated or intermittently drained from the bottom of the column. All the active surfaces are mechanically polished to a surface roughness of Ra < 0.6 μm. The exchanger body shall be electro-polished after mechanical polishing. All the detachable connections are joined with Tri-Clamp sanitary accessories, and are supplied with FDA approved quality certificates. All welding is carried out in inert gas atmospheres, using an automatic orbital method whenever possible. The heat exchanger consists of a double tube sheet (DTS), constructed from AISI 316L stainless steel. The column is thermally insulated with rock wool and it is clad with AISI 304 stainless steel sheet. The skid is made out of AISI 304 stainless steel. Operation is fully automated by means of sensors and the unit is equipped with the required safety and protection equipment, providing warning signals and alarms. A PLC performs the control and management of the equipment. The equipment can be easily supervised and controlled by means of a touch screen in the control panel.Generators - OtherI Have It
W472616Chamber for Hydrogen Peroxide Sterilizer '- Floor level loading/unloading system - Constructed in stainless steel 304 or 316 grade - Optimum safety against accidental exposure to the bio-decontamination agent (HPV) - Chamber doors are provided in either phenolic resin or stainless steel. - Recirculating catalytic aeration for minimal exhaust of conditioned air - Colour touch panel to enable the easy operation of the HPV bio-decontamination process - Modular panels type - Interlocked controlled doors with inflatable seals - Ceiling mounted catalyst/HEPA unit for rapid aeration giving fast bio-decontamination cycle times - External extract fan-filter unit - Ceiling-mounted catalytic aeration unit - Integral compressed air supply - Air-purge boost system - Hand held HPV detectorSterilizersI Have It
W472615Generator for Hydrogen Peroxide Sterilizer '- Mobile type VHP generator should be able to provide the dry, low temperature sterilization within large sealed enclosures such as VHP chamber, cleanrooms and filling lines. - Sterilant shall be form of dry & gaseous type - Process should consists of four distinct phases: • Dehumidification - Humidity is removed from the room space via an integrated desiccant system. This is done to ensure that a true, dry biodecontamination process is achieved. • Conditioning - Vaprox is rapidly injected by the generator and converted into a dry vapor that quickly raises the level of hydrogen peroxide to an effective concentration. • Biodecontamination - Hydrogen peroxide vapor concentrations are maintained at the target concentration level to provide an effective kill of micro-organisms in the chamber space. • Aeration - The generator stops injecting Vaprox and accelerates the breakdown of vapor into its environmentally friendly base elements of water vapor and oxygen. - Aeration continues until hydrogen peroxide is reduced to an acceptable level and the VHP chamber is commissioned for regular use. - GAMP Compliant unit is portable, accurate, reliable, and convenient to use. - Mobile unit can be placed inside or outside of the enclosure. - The gaseous decontamination process is effective against a wide variety of microorganisms - Provides a non-toxic and environmentally friendly alternative to other decontamination processes. - Vaporized Hydrogen Peroxide breaks down to water vapor and Oxygen. Generators - OtherI Have It
W472613 Polished chamber (Ra < 0.63μm / 25μinch) • Chamber is made of sanitary stainless steel AISI 316L and jacket is made of stainless steel AISI 304 • Safe and simple automatic sliding door(s) • Pneumatically operated process valves • Fully automatic leak rate test • 0.2μm membrane type sterilizing grade air admission filter in stainless steel housing • Sanitary stainless steel chamber piping (media to chamber /product contact media) • Stainless steel media-to-jacket piping • PLC Control System with HMI included following features - User friendly interface - Comprehensive alarms/alerts - Process and alarm logging - Multi-level password protection • Convenient loading systems. • Jacket cooling system • Equipped with heat distribution blower fans inside chamber • Equipped with air compensation system • Printers or recorder for process / batch documentation • Supervisor for independent process monitoring SterilizersI Have It
W472612Steam Sterilizer Polished chamber (Ra < 0.63μm / 25μinch) • Chamber is made of sanitary stainless steel AISI 316L and jacket is made of stainless steel AISI 304 • Safe and simple automatic sliding door(s) • Pneumatically operated process valves • Fully automatic leak rate test • 0.2μm membrane type sterilizing grade air admission filter in stainless steel housing • Sanitary stainless steel chamber piping (media to chamber /product contact media) • Stainless steel media-to-jacket piping • PLC Control System with HMI included following features - User friendly interface - Comprehensive alarms/alerts - Process and alarm logging - Multi-level password protection • Convenient loading systems. • Jacket cooling system • Equipped with heat distribution blower fans inside chamber • Equipped with air compensation system • Printers or recorder for process / batch documentation • Supervisor for independent process monitoring SterilizersI Have It
W472611Steam Sterilizer Polished chamber (Ra < 0.63μm / 25μinch) • Chamber is made of sanitary stainless steel AISI 316L and jacket is made of stainless steel AISI 304 • Safe and simple automatic sliding door(s) • Pneumatically operated process valves • Fully automatic leak rate test • 0.2μm membrane type sterilizing grade air admission filter in stainless steel housing • Sanitary stainless steel chamber piping (media to chamber /product contact media) • Stainless steel media-to-jacket piping • PLC Control System with HMI included following features - User friendly interface - Comprehensive alarms/alerts - Process and alarm logging - Multi-level password protection • Convenient loading systems. • Jacket cooling system • Equipped with heat distribution blower fans inside chamber • Equipped with air compensation system • Printers or recorder for process / batch documentation • Supervisor for independent process monitoring SterilizersI Have It
W472610Water Distiller '- Multi-effect still including control and visualisation system - Compact & modular design and mounted on the skid. - All parts in contact with the media are made of SS316 L. - Insulated with mineral wool with external cladding made of stainless steel AISI 304. - Electro polished creviceless inner contact surfaces. Inner surfaces are polished to Ra 0.64 μm - PLC based system for automated operation. - Sanitary triclover fittings for quick and easy preventive maintenance. - Double tube Sheet construction for the first column, where boiler steam is present. - Synoptic panel board with facility for logging the data can also be given. - User-friendly touch-screen HMI with the following menu: • Mimics of the equipment, showing the operational state in real time • Process parameters (temperature, pressure and conductivity) • Setting up of parameters • Alarm information • Start-up and alarm recognition.  I Have It
W472609Purified Water Generation Systems should meet the following specifications: - Mounted on the skid - Feedwater Pre-Filtration - Water Softenening - Carbon Filtration - 5 µm Filtration - Stainless Steel Feedwater Break Tank - Ultraviolet (UV) Disinfection (Pre and/or Post RO) - Reverse Osmosis (RO) - Continuous Electrodeionization - Industrial PLC w/ Touch-Screen Interface - FRP Softener, Filter, & RO housings - Sanitary Stainless Steel Tubing (Post RO) - Stainless Steel Framing & Enclosures - SIngle-Point Utility Connections - Integrated RO CIP - Chemical Sanitization - TOC Monitoring - Complete Documentation PackageWater Purification and Still SystemsI Have It
W472604Customer wants a glass lined or hastelloy nutsche pressure filter with a capacity of about 50L. Pressure requirement of around 50 PSI Max.FiltersI Have It
W472563Willmes bladder press 2 ton capacity or higher I Have It
W472427Hi Chris, I'm looking for a bsaic surgical microscope (e.g., I've used Zeiss OPMI 6 - CF in the past) MicroscopesI Have It
W472415European buyer is looking ABI ViiA7 384-well system. PCR and Thermal CyclersI Have It
W47236424" or 30" sifterSieves or SiftersI Have It
W472362Front & Back labeler, 6' high label, hold down, for an 8" diameter tubLabelersI Have It
W472361Delkor Spot-PakBundlersI Have It
W472351Kreiger Molto Mat MMU with 100L working capacityMixers/AgitatorsI Have It
W472341Buyer is looking for an automatic 3'' core cutter I Have It
W472337Pallet Wrappers 50 Hz 220 Volts Pallet WrappersI Have It
W472335Large Chambered Sterilizer for Talc; steam sterilizer w/ capacity of 72 bags per half hour; 50 lbs each; 1150 mm x 1690 mm x 3440 mmSterilizersI Have It
W472333Sedigraph 5120; 5100 w/ x-ray tubes 50 Hz 220 Volts AnalyzersI Have It
W472330Large Production Scale Ball MillBall MillsI Have It
W472325Caterpillar 950C Front End Loader  I Have It
W472323Caterpillar or Toyota or TCM Fork Lift Automatic --> 3 tons capability; diesel engineFork Lift TrucksI Have It
W472314Buyer is looking for an Alvey 880 palletizerPalletizersI Have It
W472117
  • Tetra Pak S700 Freezer
  • Description:
  • Nominal output: 150-700 litres (40-185 US gallons) of ice cream/hour.
  • Inlet of mix: +5°C +41°F
  • Outlet of ice cream: -5°C +23°F
  • Overrun: 100%
  • Freezing, mixing and whipping of ice cream mix and air to produce ice cream. Scraped-surface freezing of other products. The freezer is a self-contained unit ready to be connected to power, air, water and mix supplies. The ice cream mix is metered into the freezing cylinder by a gear pump. A constant airflow is fed into the cylinder together with the mix.
  • The freezing cylinder is cooled by the built-in R404A refrigeration plant. During the passage through the cylinder, the air is whipped into the mix by a dasher.
  • The stainless steel blades mounted on the dasher continuously scrape the frozen ice cream from the inside wall of the cylinder. The ice cream then passes to the outlet pump.
  • Specifications:
  • Compressor power: 12.3 kW 15 HP
  • Refrigerant gas: R404A
  • Refrigerant content: 2.5 kg 5.5 lbs
  • Fluid for condensation: Water
  • Dasher motor power: 7.5 kW 10 HP
  • Mix pump motor power: 0.55 kW 0.74 HP
  • Cream pump motor power: 0.55 kW 0.74 HP
  • Total installed power: 21 kW 28.2 HP
  • Air consumption: 1 m3/h 36 cu.ft./h
  • Air pressure required: 6 bar 87 psi
  • Required air quality: no oil, max water content 2.5 g/m3 0.06 g/cu.ft.
  • Equipped with main circuit breaker at 400 V 40-50 Amp
  • Refrigerators- FreezersI Have It
    W472110Buyer is looking for an Amplas bagging machine model M1416-SHW or M1406-SBag MakingI Have It
    W472098v-blender 1/2 cu ft. - 2 cu ft. with interchangeable shells suitable for a GMP environment I Have It
    W472090Check weigher for 7.5" container max; reads: 1g - 2 lbs; does not need rejection systemCheck WeighersI Have It
    W472089Induction Sealer for 120 mm lid sealer --> flat design; AIR COOLED NOT water cooled SealersI Have It
    W472088316 Stainless Steele Pressure Vessel w/ mixing [300 L]VesselsI Have It