Sealed Bid #1053 Sealed Bid! 40 ENGEL ES 200 45 HL Injection Molding Machines from Leading Toy Manufacturer in Denmark

Lot 40 Listing# 610782 Engel ES200 45 HL Plastic Single Action Injection Moulding Press


Sealed Bid

8/20/2019


Register


Bid Packets Must be Recieved by:  9/27/2019 1:00 PM

Location:   Billund, Bygn. 83-06, Denmark

Buyer Premium:   18%




Equipment Description
Engel ES 200/45 HL Plastic Single Action Injection Moulding Press

  • Engel ES 200/45 HL Plastic Single Action Injection Moulding Press
  • 130,075 Hours use up to 15th January 2019, Final hours showing on Hour meter = 9,026 Hours
  • Stopped being used in production End January 2019, prior to being warehoused.
  • Was fitted with a pair of 550 mm wide x 410 mm high Plastic Injection Moulding Press Tools, now removed
  • Injection Moulding Press speed = 150 mm/second, or 9 m/minute
  • Injection Moulding Pressure Maximum = 2300 Bar
  • The machine is fitted with a Single screw Plastic Extruder feeder, which was fitted with a special 30 mm diameter + LD 20.0 Screw x 700 mm long, which has been removed
  • The Extruder feedscrew delivered to the 2 off Moulding Heads, Molten Plastic at the rate of 15 g/second with ABS plastic, and 17 g/second with PC plastic.
  • The Injection Moulding Machine measures overall 3300mm long x 1300mm wide x 2600mm high, and weighs 3650 Kgs

  • Please Note; The Injection Moulding Machine is not supplied with Mould Tools, or the Plastic Infeed Extruder Feed Screw,
    or a Water Cooling System, and since warehoused has shown some Oil Leaks developed from the unused leaking gaskets.






  • Specifications:
    Standard
    Metric

    Manufacturer Name
    Engel
     

    Year:
    2000
    2000

    Model:
    ES200/45 HL
    ES200/45 HL

    CE Marked:
    YES
    YES

    Serial Number:
    41019
    41019

    Capacity Speed:
    9 METERS/MIN
    9 METERS/MIN

    Products Run:
    Plastic Mouldings
    Plastic Mouldings

    Voltage:
    400 VOLTS
    400 VOLTS

    Frequency:
    50 HERTZ
    50 HERTZ

    Phase:
    3+1
    3+1

    Current:
    75 AMPS
    75 AMPS

    Air Requirements:
    6 BAR
    6 BAR

    Heating Cooling Requirements:
    Cooling
    Cooling


    Dimensions:
    Standard
    Metric

    Overall:
    129.92 x 51.18 x 102.36 in - 8046.79 lb
    3300 x 1300 x 2600 MM - 3650 KGS


    Powers On Explanations
    Was in use
    Disclaimer

    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.



    Location:

    Billund, Bygn. 83-06, Denmark

    Start Date:

    8/20/2019 9:00 AM

    End Date:

    9/27/2019 1:00 PM

    Invoices Will be Sent:

    9/9/2019 12:00 AM
    All invoices must be paid within (5) days.