Online Auction #1218 Novartis Lab Department Closure Featuring Lab Equipment from Multiple Facilities in North America

Lot 407 Listing# 833777 Microtrac S3500 Particle Size Analyzer With Turbotrac And Sample Delivery Controller SDC


You must be logged in to participate in auctions

Log in





Equipment Description
Microtrac S3500 Particle Size Analyzer With Turbotrac And Sample Delivery Controller (SDC)

(1-4) Microtrac S3500 Particle Size Analyzer
  • Measuring range: 0.02 µm - 2.8 mm.
  • Measuring principle: Laser diffraction.
  • Lasers: 3x Red 780 nm.
  • Laser power: 3 mW nominal.
  • Detection system: Two fixed photo-electric detectors with logarithmically spaced segments placed at correct angles for optimal scattered light detection from 0.02 to 165 degrees using 151 detector segments.
  • Data: Volume, number and area distributions as well as percentile and other summary data.
  • Data format: Stored in ODBC format in encrypted Microsoft Access Databases to ensure compatibility with external statistical software applications.
  • Measuring time: ~ 10 to 30 seconds.
  • Power requirements: AC input: 90 - 132 VAC, 47 - 63 Hz, single phase. 200 to 265 VAC, 47 - 63 Hz, single phase.
  • Eductor air supply: 100 psi (689 kPa) maximum pressure. 5 CFM (8,5 m3/h) at 50 psi (345 kPa) minimum flow rate. Free of dry contaminants, moisture and oil.
  • Vacuum: Vacuum must exceed 50 CFM.

    (2-4) Turbotrac
  • Case Material: Door - Nalgene plastic; Covers - ABS plastic.
  • Power: 12VDC and 24VDC provided by Microtrac Sample Delivery Controller (SDC).
  • Power Consumption: Included in maximum VA rating of SDC.
  • Recirculator Interface: Standard 9 pin male-male straight through interface cable.
  • Temperature (operating): 10 to 35 Degrees C (50 to 95 Degrees F).
  • Temperature (storage): -10 to 50 Degrees C (14 to 122 Degrees F).
  • Humidity 90% RH, non condensing maximum.
  • Pollution: Degree 2.
  • Vacuum Connection: Quick-disconnect fitting on S3500, 1.25 in tube (Standard Vacuum hose.) If supplied
    by user, vacuum source must exceed 50 CFM, 50 "H2O.
  • Eductor Sample Connection 3/8" tube fitting.
  • Eductor Air Connections 1/4” push-to-connect fittings.
  • Eductor Air Supply: 100 psi (689kPa) maximum supply pressure. 5 CFM at 50 psi (345 kPa) minimum flow rate. Free of dry contaminants moisture and oil.

    (3-4) Sample Delivery Controller (SDC)
  • Voltage: 90 to 250 VAC.
  • Frequency: 47 to 63 Hz.
  • Temperature: 5 to 40 Degrees C (operating) (41 to 104 Degrees F).
  • Humidity: up to 90% non condensing.
  • Viscosity: 5 cp maximum.
  • Volume: 200mls nominal.
  • Flow Rate: 0 to 65 mls/sec with water.
  • Inlet Pressure: 50 psig maximum.
  • Frequency: 40KHz nominal, self tuning to maintain consistent output.
  • Power Level: Variable, 20 to 40 Watts.
  • Time: 1 to 999 seconds programmable.

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Microtrac
     

    Serial Number:
    T4289, MW15100204-0000-000-2M, D6014
    T4289, MW15100204-0000-000-2M, D6014

    Model:
    S3500
    S3500

    Voltage:
    90-265 VOLTS
    90-265 VOLTS

    Frequency:
    50/60 HERTZ
    50/60 HERTZ

    Phase:
    1
    1

    Current:
    25-50 WATTS
    25-50 WATTS

    Type:
    PARTICLE SIZE
    PARTICLE SIZE

    Recommended Packaging Form:
    PALLET
    PALLET


    Dimensions:
    Standard
    Metric

    See all item dimensions

    Item #1:
    18 x 22.00 x 14.00 IN - 0.00 LBS
    18.00 x 22.00 x 14.00 IN - 60.00 Pounds

    Item #2:
    14 x 7.00 x 8.00 IN - 0.00 LBS
    14.00 x 7.00 x 8.00 IN - 10.00 Pounds

    Item #3:
    17 x 7.00 x 12.00 IN - 0.00 LBS
    17.00 x 7.00 x 12.00 IN - 42.00 Pounds

    Item #4:
    15 x 13.00 x 9.00 IN - 0.00 LBS
    15.00 x 13.00 x 9.00 IN - 19.00 Pounds

    Overall:
    64 x 22 x 14 IN - 131 LBS
    1625.60 x 558.80 x 355.60 mm - 59.42 kg

    Disclaimer

    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.



    Location:

    Canton, MA, USA

    Start Date:

    10/19/2021 9:00 AM

    End Date:

    10/19/2021 4:00 PM

    Invoices Will be Sent:

    10/22/2021 12:00 AM
    All invoices must be paid within (5) days