Listing# 771297

COMPACITOR WINDING MACHINE VANTAGE MODEL 125


Seller's Acceptable Currency:

$295,000.00 USD

Make An Offer

Location:  North America

Level of Removal:  Still Installed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you





Equipment Description
COMPACITOR WINDING MACHINE VANTAGE MODEL 125

Model: Vantage 125 complete with Tester.
* Serial Number 552 LH
* Date of manufacture: March 2013
* Type: 125mm, (5") Automatic, dual arbor center wind, Capacitor Winding Machine.
* Faceplate: Single layer, rib reinforced aluminum tool & jig plate.
* Frame: Welded rectangular steel tube.
* Finish: Hilton Blue enamel (Sherwin Williams TPA-502).
* Six (6) Dielectric material spindles, 125mm Max wide. O.D. 76mm 0-Ring style. Capacity
18kg (40lbs) max. Roll dia 228mm (9") Max.
* Two (2) Foil spindles, 125mm Max. wide. O.D. 33.3mm O-Ring style. Capacity 18 kg. max.
Roll dia 203mm Max.
* Edge alignment adjustment of plus or minus 6.4mm
* Closed loop, Servomotor driven, tension control system.
* Electronic Web speed matching.
* Dual, retracting turret mounted, compound collapsible arbor assembly.
* Max. winding width; 125mm including extended foil allowance. Min. web width 63mm.
* Foil and dielectric length measuring.
* Wind to turns or wind to length control.
* Break detection system.
* Arbor drive: 1 H.P. D.C. servomotor with resolver feedback and integral arbor position
encoding.
* Secondary drive: 1/21 H.P. D.C. servomotor with resolver feedback.
* Programmable acceleration and deceleration control.
* Inching and jogging control.
* Perforator assemblies on each web. Pneumatically actuated.
* Robotic element removal and transfer system.
* Element double taping system with pressure roller.
* Giddins and Lewis PLC programmable controller. Digital and analog outputs for controls of
servomotor and machine controls. Touch screen operator interface.
* Automatic testing station with narrow belt loading, positioning and unloading.
* Programmable press force to 1117 Newtons Max.
* High voltage, dry capacitance testing (5KV)
* Automatic rejection of failed elements.
* Guards and controls to meet Canadian Standards Association Z432-04.
* Electrical requirements: 220/240 VAC; 50/60 Hz; 1 PH; 25 amps max. service.
* Pneumatic requirements: 80 PSI min. (550 KPa) 1/2" dia. (12.5mm) air line. Dry, filtered air.


Specifications:
Standard
Metric

Manufacturer Name
Hilton Industries
 

Year:
2013
2013

Model:
125
125


Dimensions:
Standard
Metric

Overall:
78 x 118 x 63 IN - 5500 LBS
1981.20 x 2997.20 x 1600.20 mm - 2494.80 kg


Disclaimer

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

the USA.

This equipment is subject to a removal and loading charge.


The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.

Customers who viewed this item also viewed this