Complete Eurovent 200 Kg granulation line Mod. 600 CMG - 600 Mixer Bowl The mixer bowl is manufactured from stainless steel grade 316L. The mixer bowl has a conical shape design to improve the mixing flow pattern of product. Within the mixer bowl is a 2-speed agitator that mixes the product at atmospheric pressure. A two-speed side cutter is fitted to the side of the mixer bowl, and is used to aid the granulation process. The product is charged directly into the mixer body from a product bin by the vacuum loading system. When the mixing and granulation process is complete, product is discharged through the discharge port to the wet mill for vacuum transfer to the fluid bed dryer. DATA SHEET Machine Type: 600 CMG Bowl volume: 600 litres Bowl capacity: 220 kg/250 kg Agitator Motor: 26/33 kw Low/high speed: 172/86 rpm Crawl speed: 12 rpm Side cutter Motor: 11/9 kw Low/high speed: 1430/2850 rpm Vacuum loading system Convey rate: 600 kg/hr Maximum distance: 5 metres Wet mill Motor: 7.5 kw Impeller: square type Screen: slotted hole Services Electricity: 415volts/3ph/50hz/NE Air: 4-6 Bar to ISO 8573-1 CLASS 1-2-1 Water-seal purge Consumption: 50 litres/min Pressure: Min 1.0 Bar/Max. 2.0 Bar FLUIDIZED BED DRYER Machine type: Model 600 Max. working volume: 600 litres Max. working load: 220 kg Material container bed mesh: conidor plate Product filter-bag: twill weave nylon with brunsmet thread Lifting ram pump: 20:1 air driven hydraulic pump Air handling unit: Inlet air filtration: EU4 Panel – EU13 HEPA Heater: Heating medium: saturated steam@3.5 bar g Consumption: 0.1 kg/s Heating capacity: 90°C Temperature Rise Design pressure: 6 bar g Centrifugal fan: Process fan capacity: 1.6 ‎m³/s @ 20°C Developed pressure: 7500 Pa Fan motor: 22 kW Dry mill Motor: 4kw Vacuum unloading: Convey rate: 720 kg/hr Services: Electricity: 415V, 50 Hz,3ph. N.E. Air supply: 4 – 6 Bar g to ISO 8473-1 class 1-2-1. Air consumption: 4.7 litres/sec.