Listen Nummer 733891

Bearbeitungszentren Acra Machinery Inc. APC-S560A


Seller's Acceptable Currency:

$25,000.00 USD

Machen Sie ein Angebot

Standort:  North America

Niveau Entfernen:  

Wir empfehlen eine Inspektion weil

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you




Maschinen und Geräte Beschreibung
ACRA’s 22 in x 16 in x 16 in Used APC-S560A CNC Production Centers are Fast and Precise Vertical Machining Centers with 180° Auto Pallet Changer (Swing Table), High Speed, and Ultra Quick Tool Changer. Built on a rugged frame with quality craftsmanship, this machine is ideally suited for multiple part set up and high production Of accurate Milling, Boring, and Drill/Tap operations. Accuracy, speed, and reliability are achieved by the combination of widely spaced and double anchored linear Guide Rails aboard ribbed Meehanite Casting; Direct Coupled Spindle Motor; Ultra Quick Arm Type Tool Changer; and Single Source and Matched Control, AC Servo and Spindle Motors, and Digital Drives. STANDARD ACCESSORIES: • 180º Swivel Table, 5 ±1 Sec Index • MPG Handwheel • FANUC Control • Full Enclosure • 1.25 Sec Tool Change • Worklight • 16 Arm Type Tool Changer • Pilot Lamp • BT-40 • Coolant System • Rigid Tap To Tool Changer • Heat Exchanger For NC Cabinet • Rigid Tap To 5,500 RPM • Patented X-Axis Gull-Wing Cover • Chip Flush System • Floating Counter Balance • Internal Chip Auger • Manuals • Patented Oil Chiller System • Toolbox • Auto Way Lube CONTROLLER FUNCTIONS: • Up To 4 Axes Simultaneous Tool • Number Commands- T And 2 Digits • Minimum Input 0.001 mm or 0.0001 in • Tool Diameter Compensation - G41, G42, G40 Cancel • Spindle Speed Command S-5 Digits • Tool Length Compensation - G43, G44, G49 Cancel • Spindle Speed Override In 50~120% • Tape/Code Input - ISO/EIA Auto Recognition, RS-232 • Rigid Tap • Tape Mode/DNC Function • Rapid, Linear, Circular Feed-G0,G1,G2,G3 • Inch/Metric Conversion - G20, G21 • FeedRate Ovenide In 0~150% Increments • Skip Function G32 (Optional) • Dwell Stop - G4 P Or X • Workpiece Coordinates - G54~G59 6 Sets • Return To Home - G27, G28, G29, G30 • Local Coordinate System Setting G52 • Manual Pulse Generator With Detente - 0.0001, 0.001, 0.01 • Stored Programs - 99 • Minor Image • Jog Feed 0~393 IPM • Incremental, Absolute - G91, G90 • Rapid Overide 1%, 25%, 50%, 100% • Canned Cycles - G73~76, G80~89 SPECIFICATIONS TABLE Index Time: 5 SEC Table Overall Size: 23.6 in x 15.75 in x 3.34 in T Slots (No./ Pitch): 4 / 0.625 in Max. Table Load: 220LBS x 2 Height From Floor: 32.28 in TRAVEL X Axis: 22 in Y Axis: 16 in Z Axis: 16 in Spindle To Column: 18.62 in Spindle To Table: 5.9 in to 22 in SPINDLE Type: Direct Coupled Cartridge Taper: BT-40 (CT Opt.) RPM: 8000 (12000 Opt.) Rigid Tap: Up to 5500 RPM Motor: 10 HP Patented Oil Chiller System: Std. FEED RATES Rapid X, Y: 1890 IPM Rapid Z: 1890 IPM Cutting Feed Rate: 0.04 ~ 394 IPM ACCURACIES Positioning: 0.0002 in / 12 in Repeatability: ± 0.0001 in Table Repeatability: ± 0.0004 in AUTOMATIC TOOL CHANGER Index Time (Tool/Tool): 1.25 SEC Index Time (Chip/Chip): 2.5 SEC No. Of Tools: 16 (24 Opt.) Type Tool Changer: Arm, Side Mount Max Tool Dia.: 3.94 in Adjacent Tool Max Dia.: 3.15 in MOTORS X/Y/Z Motor: 1.34 Hp (1.88 HP FANUC) Coolant: 0.5 HP OVERVIEW Net Weight: 12,000 LBS Footprint: 116 in x 74 in x 102 in Shipping Dims: 124 in x 91 in x 108 in


Spezifikationen:
Standard
Metrik

Manufacturer Name
Acra Machinery Inc.
 

Seriennummer:
0156062
0156062

Modell:
APC-S560A
APC-S560A

Travel X-Axis:
22 IN
558,80 mm

Travel Y-Axis:
16 IN
406,40 mm

Travel Z-Axis:
16 IN
406,40 mm

Typ der Kontrolle:
CNC
CNC

Control Model:
Fanuc
Fanuc

Table Length:
23.6 IN
5994,40 mm

Table Width:
15.75 IN
40005,00 mm

Maximum Speed:
8000 RPM
8000 RPM

Rapids on X:
1890
1890

Rapids on Y:
1890
1890

Rapids on Z:
1890
1890

Feed Rate:
0.04 ~ 394 IN/MIN
0.04 ~ 394 IN/MIN

Tool Changer Capacity:
16
16

Spindle Taper:
BT-40
BT-40

Coolant Thru Spindle:
NO
NO

chip Conveyor:
YES
YES

Probing:
NO
NO

Spannung:
220 VOLTS
220 VOLTS

Phase:
3
3

Empfohlene Paketform:
CUSTOM PALLET
CUSTOM PALLET


Dimensions:
Standard
Metrik

Overall:
124 x 91 x 108 IN - 12000 LBS
3149,60 x 2311,40 x 2743,20 mm - 5443,20 kg


Disclaimer

Dieser Posten wird im Ist-Zustand am gegenwärtigen Standort veräußert. Wir empfehlen, dass Sie für Ihre eigene Inspektion einen EquipNet-Vertriebsmitarbeiter kontaktieren. Der Posten befindet sich in

the USA.

This equipment is subject to a removal and loading charge.


Die für diese Ausrüstung bereitgestellte Beschreibung stimmt EXAKT mit dem überein, was Sie erhalten, wenn Sie sich für den Kauf dieses Listings entschieden haben. Jedwede Posten, die nicht in der Beschreibung enthalten sind, aber in der optischen Darstellung dieses Listings erscheinen, werden in den Verkauf nicht einbezogen. Fotos und Videos werden ausschließlich zu Referenzzwecken bereitgestellt bzw. um einen generellen Eindruck des Zustands gewinnen zu können.

Customers who viewed this item also viewed this