Listing# 731294

Edwards QMB1200 Vacuum Pump


Seller's Acceptable Currency:

€10,000.00 EUR

Make An Offer

Location:  Europe

Level of Removal:  Already Boxed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you




Equipment Description
Edwards QMB1200 Vacuum Pump

Maximum continuous inlet pressure: 1 mbar.
Typical shaft-seal nitrogen flow: 7 slm
Warm-up time: 15 min.
Inlet connection: ISO 160 bolted.
Outlet connection: NW40
Oil capacity:
Coupling cover: 2,4 liter.
Shaft-seal reservoir: 0,13 liter
Gear case: 1,25 liter
Typical cooling water flow : 204 l/h.
Rated motor power: 4,0 kW
Weight : 450 kg.
Peak speed: 940 m3/h.
Displacement: 1435 m3/h.
Ultimate vacuum: 7x10-4 mbar or 5,3x10-3 Torr
Power input at vacuum : 1,7 kW.

Edwards IQ Dry Vacuum Pumps are well-suited for vacuum applications in solar cell manufacturing. Like integrated circuit and flat-panel display manufacturing, solar cell manufacturing depends on a variety of vacuum-based processes, from PECVD (plasma-enhanced chemical vapor deposition) silicon deposition to lamination of the finished module. High pumping speeds and rapid chamber cycling are essential if these processes are to meet the throughput requirements of the solar cell industry. Our rebuilt Edwards IQDP Dry Vacuum Pumps are dependable with benefits that include very lower up front costs, reduced energy consumption and decreased maintenance requirements.

Edwards QMB1200 Technical Data
General QMB1200
Continuous inlet pressure 0 to 1 mbar, 0 to 100 Pa
Maximum outlet pressure 1000 mbar, 1 x 105 Pa
Ambient operating temperature range 5 to 40 °C
Maximum operating humidity 90% RH
Protection degree (as defined by IEC 529) IP44
Recommended oil type Fomblin YVAC 16/6 or Krytox 1514
Electrical Data
Number of phases 3
Supply voltage 200-208 V/380-415 V at 50 Hz
200-230 V/460 V at 60 Hz
Voltage tolerance ±10%, except 208 and 415 V at
50 Hz which are +6% and -10%
Full load current ratings
Supply voltage and frequency 200-208 V 50 Hz 200-208 V 60 Hz 230 V 60 Hz 380-415 V 50 Hz 460 V 60 Hz
QMB1200 Full load (A) 16 16 14.2 8 8
Rating (kW) 4 4 4 4 4
Motor protection thermistors
Type
Reference temperature
Compliant with
Recommended control-unit
Positive temperature coefficient
160 °C
IEC 34-11
To comply with IEC 34-11
Mass (kg) 157
Minimum cooling-water flow (l.h-1) 75
Oil capacity (l)
Coupling-cover
Shaft-seal reservoir
Gear-case
2.4
0.125
1.25
Rotational speed (r.min-1)
50 Hz supply
60 Hz supply
0 to 2900
0 to 3500
Ultimate pressure without
gas-ballast, permanent gases 8 x 10-4 mbar
8 x 10-2 Pa
Pressure differential across pump
determined by the hydrokinetic drive 0 to 90 mbar
0 to 9 x 103 Pa
Recommended backing-pump QDP40 or QDP80
Vacuum connections
Inlet connection
Outlet connection
ISO160 bolted
ISO100 bolted
Cooling-water connections
Inlet connection (BSP)
Outlet connection (BSP)
Hansen quick connect
3/8 inch male
Hansen quick connect
3/8 inch female
Noise data
Continuous A-weighted
sound pressure level (dB(A))


Specifications:
Standard
Metric
Manufacturer Name
Edwar
 

Year:
2004
2004

Model:
QMB1200
QMB1200

Voltage:
400 VOLTS
400 VOLTS

Frequency:
50 HERTZ
50 HERTZ

Phase:
3
3


Dimensions:
Standard
Metric

Overall:
4.92 x 1.64 x 39.37 ft - 352.74 lb
1.5 x 0.5 x 12 M - 160 KGS

Disclaimer

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

Europe.

This equipment is subject to a removal and loading charge.


The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.