NO. de listado 1029428
Lote de 3 Cabina de Seguridad Biológica The Baker Company BioProTech III
Divisa aceptada por el vendedor:
$18,000.00 USD
Realizar OfertaUbicación: MA, EE. UU.
Nivel de Remoción:
Por qué recomendamos una inspección
*Todas las ofertas se deben ingresar en la divisa aceptada del vendedor
¿No encuentra lo que está buscando? Lo encontramos por usted.
Documentos del activo
Descripción del equipo
Lot Of 3 Unused Disassembled The Baker Company BioProTech III Biological Saftey Cabinet
Weights Are Estimates Weighed On Uncalibrated Fork Truck Scale Pallets Are To Large To Fit On Floor Scale
Unit weight: The weight of the BIOPROtect III cabinet is approximately 2300 lbs.
Dimensions: BioProtect III
: 116.88”W x 50.00”D (FOOT PRINT) x 102.50”H (over junction boxes)
Usable work area: 102”W x 36.5”D x 75”H (under diffuser)
The work area surfaces and plenums of your BIOPROtect III have been constructed entirely of metal
in order to provide strength, durability, air-tightness and resistance to deterioration. External
construction is of 16-gauge cold-rolled steel, protected by a smooth white baked enamel finish
The BIOPROtect III and BIOPROtect III-LE is a Class II Bio-Containment Enclosure designed to house
laboratory robotics or large apparatus that would not ordinarily fit in a standard Class II Biological Safety
Cabinet (BSC). Some important features of the BIOPROtect III/-LE include, vertical laminar airflow, a front
access opening, as well as supply & exhaust HEPA filters. The unit is designed to protect not only the
environment and the people using the cabinet, but also the product within from airborne contaminants. The
BIOPROtect III/-LE can be configured to vent two different ways. Vent to the room, or Vent to a Canopy
Exhaust Connection (C.E.C.) via a house exhaust system. Although your unit has passed a microbiological
test, a modification of NSF/ANSI standard-49-2002e, the BIOPROtect III/-LE is not currently listed with the
NSF
The BIOPROtect III/-LE is designed to be used under the following conditions:
Indoor use
Altitudes up to 2000 meters
Temperature range from 5° C to 40° C
Relative humidity up to 80%
Main supply voltage
115 V AC ±10% for 120 V circuits
220 V AC ±10% for 220 V circuits
Maximum relative humidity 80 percent for temperatures up to 31°C decreasing linearly to 50 percent
relative humidity at 40°C.
Transient over voltages according to Installation Category (OVERVOLTAGE CATEGORIES) II per UL
61010-1, 2nd Edition
Pollution Degree 2
One 115 V, 20 Amp, 60 Hz, Single phase connection for power to the right side wall duplex outlet. This
circuit should be wired using 12 AWG wire and with a 20 Amp circuit breaker that will serve as a
disconnect for this power supply.
One 115 V, 15 Amp, 60 Hz, Single phase connection for control power and power to the left side wall
duplex outlet. This circuit should be wired using 14 AWG wire and with a 15 Amp circuit breaker
that will serve as a disconnect for this power supply
One 115 Volt, 20 Amp, 60 Hz, Single phase connection to power the two blowers. This circuit should be
wired using 12 AWG wire and with a 20 Amp circuit breaker that will serve as a disconnect for this
power supply
The BIOPROtect III/-LE is provided with three modes of access to the work area; via the large hinged
doors that can be opened to access the entire work area, the hinged viewscreens (providing access to the
work surface) or from the 8” x 42” access (sash) openings between the bottom of the closed viewscreens and
the air intake grates. The primary means of access must be through the 8” sash openings. This is the only
means of access that will ensure the user protection from contaminants within the enclosure.
in order to provide strength, durability, air-tightness and resistance to deterioration. External
construction is of 16-gauge cold-rolled steel, protected by a smooth white baked enamel finish
laboratory robotics or large apparatus that would not ordinarily fit in a standard Class II Biological Safety
Cabinet (BSC). Some important features of the BIOPROtect III/-LE include, vertical laminar airflow, a front
access opening, as well as supply & exhaust HEPA filters. The unit is designed to protect not only the
environment and the people using the cabinet, but also the product within from airborne contaminants. The
BIOPROtect III/-LE can be configured to vent two different ways. Vent to the room, or Vent to a Canopy
Exhaust Connection (C.E.C.) via a house exhaust system. Although your unit has passed a microbiological
test, a modification of NSF/ANSI standard-49-2002e, the BIOPROtect III/-LE is not currently listed with the
NSF
circuit should be wired using 12 AWG wire and with a 20 Amp circuit breaker that will serve as a
disconnect for this power supply.
duplex outlet. This circuit should be wired using 14 AWG wire and with a 15 Amp circuit breaker
that will serve as a disconnect for this power supply
wired using 12 AWG wire and with a 20 Amp circuit breaker that will serve as a disconnect for this
power supply
doors that can be opened to access the entire work area, the hinged viewscreens (providing access to the
work surface) or from the 8” x 42” access (sash) openings between the bottom of the closed viewscreens and
the air intake grates. The primary means of access must be through the 8” sash openings. This is the only
means of access that will ensure the user protection from contaminants within the enclosure.
Especificaciones:
Estándar
Métrico
Fabricante
The Baker Company
Año:
2023
2023
Número de serie:
146965
146965
Marca CE:
DESCONOCIDO
DESCONOCIDO
Modelo:
BioProTech III
BioProTech III
Voltaje:
115
VOLTS
115
VOLTS
Frecuencia:
60
HERTZ
60
HERTZ
Corriente:
15/20
AMPS
15/20
AMPS
HEPA Filter Intact:
DESCONOCIDO
DESCONOCIDO
Empaque recomendado:
TARIMA PERSONALIZADA
TARIMA PERSONALIZADA
Dimensiones:
Estándar
Métrico
Ver todas las dimensiones
Artículo #1:
90 x 108.00 x 94.00 IN - 0.03 LBS
90.00 x 108.00 x 94.00 IN - 3,000.00 LBS
Artículo #2:
48 x 108.00 x 53.00 IN - 0.02 LBS
48.00 x 108.00 x 53.00 IN - 2,120.00 LBS
Artículo #3:
48 x 123.00 x 60.00 IN - 0.02 LBS
48.00 x 123.00 x 60.00 IN - 2,180.00 LBS
Artículo #4:
48 x 96.00 x 51.00 IN - 0.02 LBS
48.00 x 96.00 x 51.00 IN - 2,030.00 LBS
Artículo #5:
48 x 96.00 x 52.00 IN - 0.02 LBS
48.00 x 96.00 x 52.00 IN - 2,150.00 LBS
Artículo #6:
48 x 121.00 x 53.00 IN - 0.02 LBS
48.00 x 121.00 x 53.00 IN - 2,200.00 LBS
Artículo #7:
48 x 105.00 x 60.00 IN - 0.02 LBS
48.00 x 105.00 x 60.00 IN - 2,100.00 LBS
General:
378 x 123 x 94 IN - 15780 LBS
9601.20 x 3124.20 x 2387.60 mm - 7157.81 kg
Aviso Legal
Este listado se vende "en el estado que está y en donde se encuentre". Le sugerimos que se comunique con un representante de ventas de EquipNet para programar una inspección. Este artículo se encuentra ubicado en
MA
Este Listado está sujeto a costos por carga y remoción.
Tomar en cuenta El vendedor de este equipo requiere que el comprador acepte un contrato de compra venta. De clic quí para ver el contrato de venta
La descripción escrita que se ofrece para este artículo es EXACTAMENTE lo que usted recibirá si decide comprar este listado. Los artículos que no estén en la descripción pero que aparezcan en las representaciones visuales del listado, no estarán incluidos en la venta. Las fotos y videos se ofrecen únicamente como referencia y para dar una idea general de las condiciones del artículo. Por favor tome en cuenta que el peso y las dimensiones de los equipos que EquipNet proporciona en los listados solo es un aproximado y que puede variar del peso y tamaño real. Los etimados de los Vendedores por lo general no son precisos especialmente cuando se compara el equipo instalado y el mismo equipo prerarado para su envio. Por tal motivo. por favor no se confíe de la exactitud de la información en los listados de EquipNet cuando realice cotizaciones de envío y/o requerimientos del tamaño del usuario. No es transferible ningúna licencia relaacionada a este equipo.
