EquipNet, Inc.
MarketPlace  |   Own It Now  |   Auctions  |   APPRAISALS  |   My EquipNet  |   Services

Search for Equipment
Advanced

Listing #462485

GRONEMEYER CUPS CARRIERS TRANSPORT SYSTEM

$326,440.00 MXN Make An Offer
  • Seller's Acceptable Currency
  • * All offers are submitted in Seller's Acceptable Currency
  • Currency Calculator
 

Equipment Description

Carriers are conveyed lengthwise with a slat band conveyor into filler. Incoming carriers are already checked by Gronemeyer so that all carriers in
front of filler are completely empty.
In feed height (bottom of carrier) into filler is 1156 mm. Afterwards carriers are pushed onto a toothed belt conveyor which is installed inside filler.
In this broad face leading position 16 cups are filled into one carrier. Correct carrier position depends on several parameters. To achieve best
results for this filling process of carriers both push and position devices are supplied and controlled by Hassia. Further more control and monitor
of both conveyors are also part of Hassia.
Hassia has to provide that all cups are in correct position in the carrier. That means carriers with cups on the top of carrier are not allowed to feed
them to Gronemeyer conveyors.
A by-pass system for filler is available and can be used in following cases:
- Disturbance of filler
- End of shift (Opportunity to run line without filler.)
In both scenarios empty carriers are transferred on a direct way to the conveyor system between filler and cooler. By using by-pass both cooling
process and carrier handling downstream are no more linked tightly to the filling process.
Nominal output of filler is 24.000 cups / hour = 25 carriers / minute. Filling temperature is between 70 °C – 75°C. Design of chute for waste of top
foil at discharge site of filler will give access to quality checks equipment. Quality check device is located directly underneath of the chute. If
necessary a waste conveyor can be added later on high level to give better access to quality checks

Filled carriers are transported broad face leading on three separate conveyors into the Gronemeyer cooler. By means of these conveyors a train
of 10 carriers is formed between filler and cooler.
By demand of operators a filled carrier is presented for quality checks right behind filler by a lifting unit. This single carrier has to be removed by
hand from this device. Demand of carriers is realised by using the operation panel.
Empty carriers can be fed back to conveyor system by using by pass of fille

Equipment Specifications

Conversion Tools
 StandardMetric
Year2008 
Serial Number071237-2008 
ModelFZ 200 1F 
Voltage400 VOLTS400 VOLTS
Frequency60 HERTZ60 HERTZ
Phase3 
Current7.6 KW7.6 KW
Type of ConveyorsBUCKET ELEVATOR 
Estimated Shipping Weight14329.90 lb6500 KGS
Estimated Shipping Length314.96 in8000 MM
Estimated Shipping Width33.07 in840 MM
Estimated Shipping Height196.85 in5000 MM
Disclaimers ▼
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in Mexico.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.


Customers Who Viewed This Item Also Viewed

Listing # 462462
$423,000
GRONEMEYER CUPS ELEVATOR COOLER
Category: Cooler
Location: Mexico
Listing # 448971
$170,000
GEA Butterfly Valve Clusters for Buffer Tanks
Category: Valve
Location: Mexico
Listing # 448976
$960,000
Oystar Hassia Polyflex 24|28 Hot Liquid Form Fill Seal Cup Machine
Category: Thermoformer and Trim Press
Location: Mexico