Listing# 991765

Groninger Sterilizing - Depyrogenation Tunnel with Rotary Feed Table and Vial Pusher


Seller's Acceptable Currency:

€500,000.00 EUR

Make An Offer

Location:  Burgwedel, Germany

Level of Removal:  Already Crated

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

Click here to view the sales agreement.




Equipment Description
  • The equipment is designed to operate following objects: 2 ml vials
  • Vial type 2R / Vial diameter 16 (mm) / Vial height 35 (mm) / Output (vials per minute) 300
  • Equipment was purchased and never used - currently stored in original manufacturer's crates

    Infeed turntable
  • Model: DTE 1006
  • Serial #: 12725
  • Used for transport of vials to the infeed of the hot air sterilizing tunnel via infeed turntable and transport conveyor.

    Infeed pusher
  • Model: ETE 100
  • Serial #: 12726
  • The machine infeed (the supply of vials) from the upstream machine into the hot air sterilization tunnel is
    realized by using of an infeed pusher.
  • Infeed conveyor and transverse stroke unit for the vial feeding
  • Feeding of vials to the infeed pusher via scroll
  • Object offset during infeed pushing by means of transverse stroke
  • Parallel insertion onto the tunnel conveyor
  • The servo-controlled transverse stroke unit transports the vials to the tunnel infeed. At every 2nd bar,
    the series is shifted by half a vial measure. This ensures that the inserted vials are pushed into the
    gaps in the last row, thus creating the densest vial pack on the tunnel conveyor.

    Laminar Flow Unit
  • Model: LF
  • Serial #:12727
  • The air in the air circulation system is directed to the vials via class H14 HEPA- filter.
  • The air temperature in the infeed zone is 50 °C - 60 °C and is regulated by the exhaust and circulating
    air controller with infinitely adjustable two-way slides in the base frame. Slides to the right and left of
    the doors regulate the circulating air, a pusher on the face regulates the exhaust air. The slides are
    operated by a linear drive each. If the air temperature is too high, the circulating air slides are closed
    and the warm air is discharged to the surrounding space or the exhaust air duct through open exhaust
    slides and then fans.

    Hot air sterilizing tunnel
  • Model: STH 1154
  • Serial #:12728
  • In the hot air sterilizing tunnel the vials are sterilized and depyrogenized
  • The hot air sterilizing tunnel has the following three zones: infeed zone - heating zone and cooling zone.
  • Heating zone:
  • Sterilization zone with regulated Laminar Flow unit (air speed is regulated by the supply air
    fan)
  • Sterilization zone with electronically regulated hot air (250 °C – 320 °C) from heating
    elements attached to the tunnel walls on the right and left. The hot air is directed to the
    vials by means of LF filters
  • The maximum tunnel conveyor speed is 300 mm / min.
  • Infrared radiators in the infeed section below the tunnel conveyor heat the glass bottoms to evaporate
    residual moisture in the container to prevent humid air from entering the downstream heating zone.
  • PLC manufacturer is Siemens - model: S7 with a 19" touchscreen interface
  • A Batch protocol system is integrated to the hot air sterilizing tunnel. - Batch protocol system means the same as production data acquisition.


  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Groninger
     

    Serial Number:
    12728
    12728

    Model:
    STH-1154
    STH-1154

    Voltage:
    400 VOLTS
    400 VOLTS

    Frequency:
    50 HERTZ
    50 HERTZ

    Phase:
    3
    3

    Recommended Packaging Form:
    CUSTOM PALLET
    CUSTOM PALLET


    Dimensions:
    Standard
    Metric

    Overall:
    0.00 x 0.00 x 0.00 in - 0.00 lb
    0 x 0 x 0 MM - 0 KGS

    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    Burgwedel

    This equipment is subject to a removal and loading charge.

    Please Note The seller of this equipment requires the buyer to accept a sales agreement. Click here to view the sales agreement.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.

    Customers who viewed this item also viewed this