Signal Testing Equipment
Litepoint z8653 & z8751
Occasionally EquipNet has a customer that is looking for a very specific piece of equipment that we do not have listed on our extensive MarketPlace. When this happens we use all our resources to search high and low to meet our client’s needs.
Below is the current list of current wanted equipment, if you have a piece on this list or if you are searching for your own wanted equipment, contact an EquipNet Sales Representative at +1-888-371-6555. firstname.lastname@example.org
Litepoint z8653 & z8751
Need a Leak testing machine for 3 piece eye drop Speed: 6000 Vails / Hr Vial size: up to 25 ML
Pensky-Martens flash point tester: PMA 5
Agilent Technologies 6120 Quadrupole Wanted
Pester Pac Automation pewo fold 1 compact K model E 10 Wrapper Overwrapper Bundler
Poreba Engine Lathe 36" x196"
MCP Vacuum Oven, or HEK, Renishaw, Sancron or MTT....like this piece just in newer, better condition.
Quadro 196 Comil - EXP
Tablet press Fette 3090I with all auxiliary equipment
Outdoor chiller to cool apartment complex, needs to be Freon Rated 134A
ABI 7500 Real Time PCR System
Thermo KingFisher Flex model required immediately
Looking for HAAS or Hebenstreit wafer line
Textile manufacturing equipment including weaving equipment, dying equipment and finishing equipment.
.5" to 1" cutter for plastics, brand not preferred, the cut size is what is important.
Max. 15 cu ft double cone blender
Paper Converting Equipment Wanted
Paper Manufacturing Equipment Wanted
Paper lines wanted - toilet paper and paper towel lines
Looking for a GEA PMA 1200 HSM
Looking for gel filling (sanitizers alcohol based product) with different sizes
Ranging from 100 ml up to 1000 ml.
Parts washer that will wash 24” high beer kegs, at least four at a time
Any Wet Wipe machines or packaging lines
Looking for an AMAT SemVision CX SEM
Single lane form fill seal machine that can handle 15-20 units/min, fill a 7''x 1.5'' pouch with 3oz of product. The machine also needs to be able to handle a product with viscosity of a cake batter, I would also like to be able to add a tare notch on the pouch as well
100 lbs / hr Spray Dryer. Nozzle or Atomizer.
(fraction collector and UV-monitor detection is not needed
Liquid soap packaging and filling lines
Looking for Manesty 500 Premier coater
Two zone Cocoa Toaster
Cocoa skin separator
Spark OES machine wanted
Stationary unit for aluminum alloy analysis.
Must include software
Metal casting furnace
Min capacity 300 kg, max 1000 kg.
Run temp up to 800 °C, 850° preferred
(2) High lab-scale rolling mill for aluminum
Min workpiece width 10” (min roll width 11”, max 16”)
Min Roll diameter 8” max 20”
Max opening 2” at least, 4” preferred.
Preference for a unit
- that has a smaller footprint
- that can reverse and has motorized handwheel.
Paper roll to sheet cutting machine
Similar to these ones
1 or 3 cubic feet v blender
Valve Packaging machine for powders.
Non human consumption
25 kgs bags
1-12 bags per minute
Want to pack cement
Steam potato peeler 1500-3000 kgs
Pellet Production Line 3 Tons
Any Lloyd/Ametek Tensile Testers
Millipore Milli-Q Advantage Water Purification and Still System
COOLING TOWER - 10,000 LITERS PER HOUR, TEMP IN 42C - TEMP OUT 30C MEDIA WATER 30C, VOLTAGE 480 3ph - 60 Hz.
Looking for a chocolate enrober 800 mm and cooling tunnel of 35m effective cooling length and 800 mm working width.
Potato chip line
Kilia Express Bowl Cutter, 90 liter capacity,
Looking for face mask production line