Listing# 681326

Lot of 2 off Effluent Solids Removal Hydraulic Filter Presss and Feed Pump System


Seller's Acceptable Currency:

£45,000.00 GBP

Make An Offer

Location:  United Kingdom

Level of Removal:  Still Installed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

Important Note: Equipment from this location has been exposed to penicillin. All bidders must be licensed to manufacture penicillin. A copy of that license will be needed prior to offers being reviewed.

Click here to view the sales agreement.




Equipment Description
Lot of 2 off Effluent Solids Removal Edwards and Jones Hydraulic Filter Press
  • Pharmaceutical Effluent Solids Removal Plant. Located on the Second Floor of the facility, each press contains 127 (moulded rubber steel reinforced) off 2000 x 2000mm filter press plates. Effluent sludge is pumped into the presses via a set of Thomas Willet feed pumps. The presses apply up to 10Bar of pressure to remove the liquid. Solids are discharged from the press and fall into a conveyor system that diverts the solids into waste skips positioned on the lower floor of the facility. Press plates can be cleaned using a water feed pump and compressed air system. Maximum press capacity is up to 15000Kg/day/press. Presse cycle time is approximately 5 hours.
    (1-12) Edwards and Jones Hydraulic Filter Press
  • Operating Pressure = 10 Bar
  • Single hydraulic cylinder
  • Filter Closed Load Setting = 350 tonne
  • Cloth Wash Water Pressure up to 100Bar
  • Erwin Sick GmbH Safety Light Curtain
    (2-12) Edwards and Jones Hydraulic Filter Press
  • Operating Pressure = 10 Bar
  • Single hydraulic cylinder
  • Filter Closed Load Setting = 350 tonne
  • Cloth Wash Water Pressure up to 100Bar
  • Erwin Sick GmbH Safety Light Curtain
    (3-12) Atlas Copco Air Compressor
  • Type = GA15
  • FAD = 27.2 L/s
  • RPM = 1500
  • Max P = 13Bar
  • YOM = 1994
    (4-12) Atlas Copco Air Compressor
  • Type = GA15
  • FAD = 27.2 L/s
  • RPM = 1500
  • Max P = 13Bar
  • YOM = 1994
    (5-12) Atlas Copco Air Compressor
  • Type = GA15
  • FAD = 27.2 L/s
  • RPM = 1500
  • Max P = 13Bar
  • YOM = 1994
    (6-12) Redler Filter Press Discharge Conveyor
  • Capacity = 17.7m3/hr
  • ABB 11KW drive motor, 960rpm
    (7-12) Redler Filter Press Discharge Conveyor
  • Capacity = 17.7m3/hr
  • ABB 11KW drive motor, 960rpm
    (8-12) Redler Skip Booth Selector Conveyor
  • Capacity = 17.7m3/hr
  • ABB 5.5KW drive motor, 1425rpm
    (9-12) Redler Skip Booth Selector Conveyor
  • Capacity = 17.7m3/hr
  • ABB 5.5KW drive motor, 1425rpm
    (10-12) Calder Pressure Systems Cloth Wash Positive Displacement Water Pump
  • Capacity = 316L/min@100Bar
    (11-12) Filter Press Thomas Willet Feed Pump
  • Capacity = 75m3/hr
  • Ram Diameter = 16Inch/406.4mm
  • Max Stroke Rate = 22 Strokes/min
  • 30KW Hydraulic Pack Motor
  • Max P = 10Bar
    (12-12) Filter Press Thomas Willet Feed Pump
  • Capacity = 75m3/hr
  • Ram Diameter = 16Inch/406.4mm
  • Max Stroke Rate = 22 Strokes/min
  • 30KW Hydraulic Pack Motor
  • Max P = 10Bar


  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Edwards and Jones
     

    Year:
    1994
    1994

    Serial Number:
    2621/1 & 2621/2
    2621/1 & 2621/2


    Dimensions:
    Standard
    Metric

    See all item dimensions

    Item #1:
    649.61 x 157.48 x 98.43 IN - 33,069.32 LBS
    16500.00 x 4000.00 x 2500.00 MM - 15,000.00 KGS

    Item #2:
    94.49 x 59.06 x 55.12 IN - 3,306.93 LBS
    2400.00 x 1500.00 x 1400.00 MM - 1,500.00 KGS

    Item #3:
    102.36 x 118.11 x 125.98 IN - 6,613.86 LBS
    2600.00 x 3000.00 x 3200.00 MM - 3,000.00 KGS

    Item #4:
    102.36 x 118.11 x 125.98 IN - 6,613.86 LBS
    2600.00 x 3000.00 x 3200.00 MM - 3,000.00 KGS

    Item #5:
    649.61 x 157.48 x 98.43 IN - 33,069.32 LBS
    16500.00 x 4000.00 x 2500.00 MM - 15,000.00 KGS

    Item #6:
    47.24 x 31.50 x 39.37 IN - 1,102.31 LBS
    1200.00 x 800.00 x 1000.00 MM - 500.00 KGS

    Item #7:
    47.24 x 31.50 x 39.37 IN - 1,102.31 LBS
    1200.00 x 800.00 x 1000.00 MM - 500.00 KGS

    Item #8:
    47.24 x 31.50 x 39.37 IN - 1,102.31 LBS
    1200.00 x 800.00 x 1000.00 MM - 500.00 KGS

    Item #9:
    688.98 x 118.11 x 157.48 IN - 15,432.35 LBS
    17500.00 x 3000.00 x 4000.00 MM - 7,000.00 KGS

    Item #10:
    688.98 x 118.11 x 157.48 IN - 15,432.35 LBS
    17500.00 x 3000.00 x 4000.00 MM - 7,000.00 KGS

    Item #11:
    70.87 x 275.59 x 47.24 IN - 4,409.24 LBS
    1800.00 x 7000.00 x 1200.00 MM - 2,000.00 KGS

    Item #12:
    70.87 x 275.59 x 47.24 IN - 4,409.24 LBS
    1800.00 x 7000.00 x 1200.00 MM - 2,000.00 KGS

    Overall:
    3259.84 x 275.59 x 157.48 in - 125662.20 lb
    82800 x 7000 x 4000 MM - 57000 KGS

    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    Europe

    This equipment is subject to a removal and loading charge.

    Please Note The seller of this equipment requires the buyer to accept a sales agreement. Click here to view the sales agreement.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.

    Customers who viewed this item also viewed this