Listing# 939436

Lot Of Two MTS Shaker Tables


Seller's Acceptable Currency:

$70,000.00 USD

Make An Offer

Location:  North America

Level of Removal:  Still Installed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you




Equipment Description
Lot Of Two MTS Shaker Tables
  • Two identical shaking tables from the Structures and Materials Research Laboratory at the University of Southern California.
  • The tables have the following specifications:
    • Displacement: ±2 inches.
    • Velocity: ± 35 in/sec.
    • Maximum acceleration: 4 g.
    • Operating frequency range: 0-50 Hz.
    • Table mass: 800 lbm.
    • Maximum specimen mass: 450 lbm.
    • Maximum overturning moment: 10,000 ft-lbf.
    • Maximum off-center load moment: 3,000 ft-lbf.
  • These tables were fully refurbished in less than 1 year ago.
  • All bearing and seals were replaced.
  • The system comes as a complete set with the base plate and fixtures, dynamic rated servo-hydraulic actuator, high flow rate hydraulic service manifold, slip table, and sump pump for the slip tables.
  • The system is all connected and just needs to be connected to a hydraulic power supply and a controller.
  • The system does not come with a controller.

    Lote De Dos Mesas Vibratorias MTS
  • Dos mesas vibratorias idénticas del Laboratorio de Investigación de Estructuras y Materiales de la Universidad del Sur de California.
  • Las tablas tienen las siguientes especificaciones:
    • Desplazamiento: ±2 pulgadas.
    • Velocidad: ± 35 pulg./seg.
    • Aceleración máxima: 4 g.
    • Rango de frecuencia de funcionamiento: 0-50 Hz.
    • Peso de la mesa: 800 lbm.
    • Masa máxima del espécimen: 450 lbm.
    • Momento máximo de vuelco: 10 000 ft-lbf.
    • Momento máximo de carga descentrada: 3000 ft-lbf.
  • Estas mesas se renovaron por completo hace menos de 1 año.
  • Se reemplazaron todos los rodamientos y sellos.
  • El sistema viene como un conjunto completo con la placa base y los accesorios, el actuador servohidráulico de clasificación dinámica, el colector de servicio hidráulico de alto caudal, la mesa deslizante y la bomba de sumidero para las mesas deslizantes.
  • El sistema está completamente conectado y solo necesita conectarse a una fuente de alimentación hidráulica y un controlador.
  • El sistema no viene con un controlador.

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    MTS
     

    Voltage:
    220 VOLTS
    220 VOLTS

    Frequency:
    50/60 HERTZ
    50/60 HERTZ

    Recommended Packaging Form:
    CUSTOM PALLET
    CUSTOM PALLET


    Dimensions:
    Standard
    Metric

    Overall:
    102 x 67 x 25 IN - 5000 LBS
    2590.80 x 1701.80 x 635.00 mm - 2268.00 kg

    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    the USA.

    This equipment is subject to a removal and loading charge.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.