The turboWAVE® device is based on SRC technology (Single Reaction Chamber Technology), which was invented by MLS-MWS and has been perfected to this day. The SRC technology achieves an exceptionally high performance by combining rapid heating using microwave energy with a high pressure reactor. The reactor with all the samples is both a microwave chamber and a pressure vessel at the same time. Individual steps such as closing the pressure vessel, building up pressure, heating and cooling the reaction, venting and opening the system are carried out automatically via the touch control unit.
Exceptional specifications: highest temperature and pressure limits and the fastest cooling time.
High sample throughput: twice the throughput compared to conventional microwave digestion systems.
Different samples in one run: simultaneous digestion of different sample types.
Methods: USP 232/233, ICH Q3D guidelines, and FDA regulations 21 CFR Part 11.
L&W Compressor LW 100 E1: 230V. 1 Phase. 50 Hz. 3.5 cfm. Max pressure 330 bar. 2300 RPM. Drive power 2.2 hp.
Sistema De Digestión Por Microondas Milestone turboWave
El dispositivo turboWAVE® se basa en la tecnología SRC (tecnología de cámara de reacción única), que fue inventada por MLS-MWS y se ha perfeccionado hasta el día de hoy. La tecnología SRC logra un rendimiento excepcionalmente alto al combinar un calentamiento rápido utilizando energía de microondas con un reactor de alta presión. El reactor con todas las muestras es una cámara de microondas y un recipiente a presión al mismo tiempo. Los pasos individuales como cerrar el recipiente a presión, aumentar la presión, calentar y enfriar la reacción, ventilar y abrir el sistema se llevan a cabo automáticamente a través de la unidad de control táctil.
Especificaciones excepcionales: límites más altos de temperatura y presión y el tiempo de enfriamiento más rápido.
Alto rendimiento de muestras: el doble de rendimiento en comparación con los sistemas de digestión por microondas convencionales.
Diferentes muestras en una ejecución: digestión simultánea de diferentes tipos de muestras.
Métodos: USP 232/233, pautas ICH Q3D y regulaciones de la FDA 21 CFR Parte 11.
L&W Compresor LW 100 E1: 230V. 1 Phase. 50 Hz. 3.5 cfm. Max presión 330 bar. 2300 RPM. motor 2.2 hp.
Recommended Packaging Form:
See all item dimensions
23.62 x 27.56 x 43.31 IN - 176.37 LBS
600.00 x 700.00 x 1100.00 MM - 80.00 KGS
22.01 x 15.00 x 21.02 IN - 112.44 LBS
559.00 x 381.00 x 534.00 MM - 51.00 KGS
25.59 x 15.35 x 15.75 IN - 94.80 LBS
650.00 x 390.00 x 400.00 MM - 43.00 KGS
71.22 x 27.56 x 43.31 in - 383.60 lb
1809 x 700 x 1100 MM - 174 KGS
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non-transferable.
Inspected, Guaranteed, Warranted and Refurbished Equipment
You can rest assured that when you see the EquipNet Certified logo on a listing that you will be buying equipment that has been inspected, tested, and in many cases fully refurbished. Please check the individual listing for specifics.
Guarantees & Warranties range from 30 to 180 Days!
For more information please feel free to speak with our knowledgeable representatives.
Why we recommend inspection
Why We Recommend Inspection!
We want your experience with EquipNet and with the assets that we have on our site to be extremely positive. We make every effort possible to provide accurate and thorough descriptions. The lots are sold, however, on an "as is, where is" basis with no guarantee or warranty. To ensure your satisfaction, we strongly recommend that you inspect this and every asset for which you are interested. We want to make sure that you are buying exactly what you need. This is part of our overall philosophy of an open and honest way of doing business.
To set up an inspection, please call us - North America +1.781.849.7667, Europe +44.118.901.6161, India +91-22-66715078, Latin America +57.1.508.7908 or email us at firstname.lastname@example.org
Please be aware this equipment is located in Brazil.
Brazilian laws for imports and exports are very specific and different from all other countries in South America. It’s therefore important to understand Brazil’s export regulations/policies to move goods across borders.
EquipNet’s Brazilian sellers never export equipment by themselves, which means they do not conduct transactions/business with foreign companies, only with Brazilian legal entities.
International buyers are responsible for hiring, by their own expenses, a trading company. This trading company is a Brazilian legal entity, duly registered with CNPJ (National Registry of Legal Entities) and RADAR (Registry and records of customs and customs-related agents).
The trading company legal entity will acquire the equipment from the Brazilian seller, pay the seller in local currency, and receive the related invoice from the seller in the name of their Brazilian legal entity. After this process, the ownership will then be transferred to the trading company who will be responsible for export and assistance during the customs clearance process.
The international freight quote is also necessary for the transaction process. EquipNet is happy to provide support throughout this process. Please contact sales for more information.