Listing# 1021445
OK International OK200 Bag Inserter
Seller's Acceptable Currency:
$10,000.00 USD
Make An OfferLocation: ON, Canada
Level of Removal: Uncrated/Loose
*All offers are submitted in Seller’s Acceptable Currency
Don't see what you're looking for? We'll find it for you
Equipment Description
OK International OK200 Bag Inserter
The Model 200 by OK International pulls from a roll of gusseted film tubing to cut, insert, and cuff bags in a manner of seconds. Four corner fingers open the inserted cut-off film and cuff it over the edges of the case. Depending on the materials, application, and machine configuration, the Model 200 operates at
speeds up to 15 cases per minute
Bags are cut from a roll of gusseted polyethylene layflat tubing. A 26” long heated cutoff bar forms bags of variable lengths.
The control panel features A/B controller, bag-only start/stop and e-stop push button. It also features variable length controls for bag and cuff length, as well as cut-off bar temperature controller.
SPECS:
-Maximum Case Size (L x W x H): 23” (584 mm) x 16” (406 mm) x 18” (457 mm)
-Minimum Case Size (L x W x H): 10” (254 mm) x 8” (203 mm) x 6” (152 mm)
-Speed: Up To 15 CPM
-Bag Gauges: 0.6-5.0 mm, Depending on the Material
-Machine Dimensions (L x W x H): 93” (2362 mm) x 75” (1905 mm) x 64” (1626 mm)
-Electrical Requirements: 480 V, 3 Ph, 60 Hz
-Construction: Stainless steel frame and exterior, plated and painted interior.
The Model 200 by OK International pulls from a roll of gusseted film tubing to cut, insert, and cuff bags in a manner of seconds. Four corner fingers open the inserted cut-off film and cuff it over the edges of the case. Depending on the materials, application, and machine configuration, the Model 200 operates at
speeds up to 15 cases per minute
Bags are cut from a roll of gusseted polyethylene layflat tubing. A 26” long heated cutoff bar forms bags of variable lengths.
The control panel features A/B controller, bag-only start/stop and e-stop push button. It also features variable length controls for bag and cuff length, as well as cut-off bar temperature controller.
SPECS:
-Maximum Case Size (L x W x H): 23” (584 mm) x 16” (406 mm) x 18” (457 mm)
-Minimum Case Size (L x W x H): 10” (254 mm) x 8” (203 mm) x 6” (152 mm)
-Speed: Up To 15 CPM
-Bag Gauges: 0.6-5.0 mm, Depending on the Material
-Machine Dimensions (L x W x H): 93” (2362 mm) x 75” (1905 mm) x 64” (1626 mm)
-Electrical Requirements: 480 V, 3 Ph, 60 Hz
-Construction: Stainless steel frame and exterior, plated and painted interior.
Specifications:
Standard
Metric
Manufacturer Name
OK International Corp.
Serial Number:
A923
A923
Model:
OK200
OK200
Voltage:
575
VOLTS
575
VOLTS
Frequency:
60
HERTZ
60
HERTZ
Phase:
3
3
Recommended Packaging Form:
CUSTOM PALLET
CUSTOM PALLET
Dimensions:
Standard
Metric
Overall:
156 x 96 x 75 IN - 3000 LBS
3962.40 x 2438.40 x 1905.00 mm - 1360.80 kg
Disclaimer
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in
ON
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non-transferable.
