Número do item 1027564

Linha de Envase de Ampolas Bausch and Strobel FVF-5061


Entre em contato
Fazer uma oferta

Localização:  OH, Estados Unidos

Nível de Remoção:  

Por que recomendamos visita aos equipamentos?

*Todas as ofertas são enviadas em moeda dos vendedores

Não encontrou o que você está procurando? Nós podemos encontrar para você




Descrição do equipamento
Bausch and Strobel Vial Filling Line

Vial Washer
  • Manufacturer: Bausch & Strobel
  • Model: FAW-1120
  • Serial #: 53301
  • Siemens MP370 touch screen operator interface
  • Siemens S7- 300 control is used as PLC system.
  • Light stack status indicator light
  • Container (vial) dimensions that were being used were: 16.00±0.20 x 33.00±0.50
  • The operating output was going to be: 12,000 vials per hour (200 vials per minute)
  • The maximum machine output is 13,300 VPH (220 vials per minute depending on product)
  • Includes unpacking station for unwrapping packages of wrapped vials - the operator then places the unwrapped vials on to the integrated unscrambling table for supply in to the machine.
  • The FAW 1120 type machine is designed for washing stable containers, such as vials and bottles, and coating them with silicone.
  • Speeds up to 13,300 items/h
  • Container diameters from 16 - 95 mm
  • Container height from 22 - 250 mm

    Depyrogenation Tunnel
  • Manufacturer: Bausch & Strobel
  • Model: DHT-3670
  • Serial #: 53553
  • The DHT 3670 type machine is suitable for drying, depyrogenising and sterilizing vials and bottles with a height of 30 - 255 mm and baking the silicone coating.
  • Siemens S7-400 PLC for the sterilizing tunnel.
  • Electrics: 480 volt, 60 hz, 3 ph
  • Width of conveyor belt 700 mm
  • Vial dimensions to be run: Ø 16.00±0.20 x 33.00±0.50
  • Required output 12,000 [containers/h]
  • Max. output (of the sterilizing tunnel): 168 kg at 3 log reduction

    Vial Filler
  • Manufacturer: Bausch & Strobel
  • Model: FVF-5061
  • Serial #: 53808
  • Siemens S7-400 PLC controller
  • Speeds up to up to 12,000 items/h
  • Time pressure style filling
  • Integrated particle counting at infeed table, gross scales, stopper sorter and crimping station
  • Container diameters from 14.25 - 68 mm
  • Integrated microbial monitoring at infeed star-wheel, stopper transfer and crimping station
  • Internal pressure differential pressure monitoring
  • Container height from 30 - 137.5 mm
  • Stoppers diameter from 12 - 31,5 mm
  • Stopper height from 6.5 - 40 mm
  • Crimp caps diameter from 12.5 - 33 mm
  • Crimp cap height from 6 - 15 mm
  • Isolator: laminar flow unit / RABS
  • The machine is equipped with a total of 9 LF units.
  • The machine was going to be running vials with the following dimensions: Ø32.0±0.3 x 77.4±0,8
  • Stopper size: 13 mm
  • Flip off style crimp caps: 13 mm
  • The fill volume was to be from 10 to 60 mg
  • Approximate output: 12,000 vials per hour
  • Maximum output: 12,000 vials per hour (depending on application)
  • Walking beam style filling
  • Pre and post filling check weigh for vials
  • Four station check weigh and filling
  • Automatic reject on discharge
  • Vision system for crimping quality check consists of three cameras which are mounted 120 degrees apart


    Tray Loader
  • Manufacturer: Bausch & Strobel
  • Model:
  • Serial #:

  • Especificações:
    Padrão
    Métrico
    Nome do fabricante
    Bausch and Strobel
     

    Ano:
    2007
    2007

    Modelo:
    FVF-5061
    FVF-5061

    Forma Recomendável da Embalagem:
    PALLET CUSTOMIZADO
    PALLET CUSTOMIZADO


    Dimensões:
    Padrão
    Métrico

    Total:
    0 x 0 x 0 IN - 0 LBS
    0,00 x 0,00 x 0,00 mm - 0,00 kg

    Aviso Legal

    Recomendamos que você entre em contato com a EquipNet para agendar uma visita ao equipamento (19) 3277-1125, [email protected].

    OH

    Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador.


    Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador. Poderão haver requisitos específicos na execução dos serviços dentro da área do vendedor. Poderá ser obrigatória a realização dos serviços somente por empresas que já são homologadas pelo vendedor.

    Pessoas que visualizaram este produto também viram: