Número do item 517379

Máquina Vertical Formadora, Envasadora e Seladora SIG RGS-7/KG1


Moeda Aceitável de Vendedores:

€18,500.00 EUR

Fazer uma oferta

Localização:  Europe

Nível de Remoção:  

Por que recomendamos inspeções

*Todas as ofertas são enviadas em moeda dos vendedores

Não veja o que você está procurando Nós vamos encontrá-lo para você





Documentos de Ativo
Descrição do equipamento
  • SIG RGS-7|KG1 Sachet Filling Machine and Cartoner
  • DESCRIPTION:
  • 7 lane flat sachet line consisting of bag filling machine and cartoner. Equipped with heat sealing, photoelectric alignment, unwind stand. Pre-glued longitudinal boxes. Lean processes, safe interfaces, guaranteed system efficiency, high pouch quality and weight accuracy.

  • SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.

  • MAIN FEATURES: The Sigpack RGS/KG Flatpouch sachet System will help you to have a long-active success. The system consists of a primary packaging, a transport and grouping module and a secondary packaging. This integrated solutions afford highest output on smallest space. The primary packaging Sigpack RGS is a multi-lane, vertical sachet machine and is optimized for the packaging process of sensitive powder or granules from the food, pharmaceutical and chemical industries. The high requirements to our technique and quality ensure a high performance, accuracy and reliability. The combination with the Sigpack KG leads to a minimized system layout. This highly integrated construction extend the Sigpack RGS perfectly and realize an efficient system solution. The format range is flexible, adjustable and offers a wide possibility in the cartoning dimensions and the disposal of the products.
  • Year: 1993.

  • TECHNICAL DATA
  • Voltage Volt 380.
  • Filling capacity sachets/min 875.
  • Max roll width mm 800.
  • Max. roll ext. diam. mm 600.
  • Cartoning capacity cartons/min 100.
  • Weight ca kg 5500.
  • Air reject ca bar 6.
  • Sachet formats: A,B,D,F,Gvrac,H,K 57 x 80 mm (WxL).
  • Sachet formats: C,E 57 x 100 mm.
  • Sachet formats: I,J 57 x 60 mm.
  • Carton format: A/1- 20 pouches (sachet) 66 x 82 x 80 mm (WxLxH).
  • Carton format: B/2– 2 x 10 pouches 132 x 82 x 40 mm.
  • Carton format: C/3– 10 pouches 66 x 102 x 55 mm.
  • Carton format: D/4– 20 pouches 66 x 82 x 70 mm.
  • Carton format: E/5– 2 x 10 pouches 132 x 102 x 55 mm.
  • Carton format: F/6– 8 pouches 66 x 82 x 42 mm.
  • Carton format: G/7– 12 pouches 66 x 82 x 42 mm.
  • Carton format: H/7– 12 pouches 66 x 82 x 42 mm.

  • Sigpack Dosing System:
  • Fig.13 dispenser unit
  • Continuous dosing auger
  • Use: Dosage and bagging of the quantities of products in pre sealed sachets.
  • Operation: The product from the silos is carried to the vibrators 6, in the continuous network 3. A level sensor 5 controls the filling level and controls the vibrator 7, the stirrer 4 driven by a separate motor 8, regularly distributes the product towards continuous network. The auger 2 command is run separately through the electric motors whose speed can be adjusted separately and the filled quantities depend on these. Depending on the amount of filling the auger makes its vertical movement.
  • The operating conditions (important points).
  • 1. The correct installation of the auger filler 2.
  • 2. The correct setting of the vibrator 7: During production pay attention to changes in the level of the cochlea.
  • 3. The vertical movement depends on the speed of the auger, which determines the filling volume. After a change of the number of revolutions it is necessary to correct the movement accordingly.

  • Settings
  • Regarding point 1
  • The auger fillers must not be reversed. The numbers engraved on the auger hopper and auger itself must match.

  • Regarding point 2
  • Factory settings.

  • Rigurado point 3
  • a) Loosen the screw 10.
  • b) Adjust the drive shaft 9.
  • c) Tighten the screw 10.
  • Closing valves Fig.13
  • Use: Closure of the filling tubes 16 to prevent the fall of the product after the filling from the extremities of the auger filler.
  • Operation: The openings of the filling tubes 16 operate through the drive shaft 13, which are connected by a reference to a cam located in the transmission box.
    the operating conditions (important points).
  • 1. The closing valves 17 must rotate as close as possible to the extremities of the cochlea, but without rubbing.
  • 2. the correct position of the two proximity probes 11 for controlling the position of the closing valves settings.

  • Regarding point 1:
  • The closing valves 17 make a slightly arched motion for which in their final position in the top and bottom should touch the extremities of the auger. While the radius of this movement is set by the factory to the inclination of the extremities of the cochlea, the movement and the height of the closing valves can be adjusted according to the necessities.
  • Adjustment of the movement (machine in position: dosage finished).
  • a) Loosen the slide fastener 12 of the drive shaft 13 loosen the screw 15.
  • b) lntroduce a wedge of a thickness of 1 mm between the valve support 14 and the guide of the dosage auger 16 17.
  • c) Press slightly by hand the closure valve against the extremity of the cochlea and lock 15
  • d) Secure the sliding support 12.

  • CAUTION
  • Regarding point 2:
  • If for a certain period of time no metal strip is detected by the sensor, the machine stops automatically. Distance between the sensor and metal = 0.5 - 1.5 mm.

  • Especificações:
    Padrão
    Métrico
    Nome do fabricante
    SIG
     

    Ano:
    1993
    1993

    Modelo:
    RGS-7/KG1
    RGS-7/KG1

    Capacidade Tamanho:
    6 LBS
    2,72 kg

    Marcado CE:
    SIM
    SIM

    Velocidade:
    100 CPM
    100 CPM

    Produtos Transportados:
    Pouch formats: A,B,D,F,Gvrac,H,K, 57 x 80 mm (WxL).
    Pouch formats: A,B,D,F,Gvrac,H,K, 57 x 80 mm (WxL).

    Requisitos de Ar:
    6 BAR
    6 BAR

    Requisitos de Aquecimento/Refrigeração:
    Air cooled
    Air cooled

    Tensão:
    380 VOLTS
    380 VOLTS

    Frequência:
    50/60 HERTZ
    50/60 HERTZ

    Fase:
    3
    3

    Corrent:
    15 AMPS
    15 AMPS

    Forma Recomendável da Embalagem:
    CUSTOMIZADO
    CUSTOMIZADO


    Dimensões:
    Padrão
    Métrico

    Total:
    157,48 x 98,43 x 78,74 in - 12125,30 lb
    4000 x 2500 x 2000 MM - 5500 KGS

    aviso Legal

    Este lote se vende "no estado em que se encontra". Recomendamos que contate um representante de vendas da EquipNet para agendar uma inspeção. Este artigo se encontra em

    Europe.

    Este equipamento está sujeito a taxas de desinstalação e remoção.


    A descrição por escrito fornecida para este equipamento representa EXATAMENTE aquilo que você receberá se optar por comprar este item. Todos os artigos que não estão na descrição, mas aparecem nas representações visuais deste item não serão incluídos na venda. Fotos e vídeos são fornecidos apenas como referência e para dar uma noção geral do estado dos itens.