Automatic 'L' bar sealer using a pusher to transfer product.
Monochrome user interface.
Sealing jaw assembly is easily adjusted front to back to obtain the correct sealing area size.
Seal jaws and film puller are independently adjustable up and down to match product.
Smooth transfer between in-feed tray and sealing area allows unstable products to be wrapped.
Available as a hot knife or wire seal system.
Optional Teflon blind assembly for wire seal system.
Optional adjustable film inverting head.
Ground level loading of the film roll.
Excess film is removed by a scrap rewind system.
Constructed from tubular steel frame and heavy gauge sheet metal, stainless steel loading tray.
D.C. Variable Speed motors on in-feed, discharge, film unwind, and film rewind.
Max. air consumption of 4 CFM @ 75 PSI.
120/208 Single Phase, 3 wire, 15 Amps 60 Hz.
All units are ESA approved by special inspection.
Package Size Maximum 17" wide X 21" long
Film Maximum - 26"
Footprint 80" wide 96" long
RBS Equipment Designs
Recommended Packaging Form:
8 x 5 x 5 FT - 1500 LBS
243.84 x 152.40 x 152.40 cm - 680.40 kg
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non-transferable.
Inspected, Guaranteed, Warranted and Refurbished Equipment
You can rest assured that when you see the EquipNet Certified logo on a listing that you will be buying equipment that has been inspected, tested, and in many cases fully refurbished. Please check the individual listing for specifics.
Guarantees & Warranties range from 30 to 180 Days!
For more information please feel free to speak with our knowledgeable representatives.
Why we recommend inspection
Why We Recommend Inspection!
We want your experience with EquipNet and with the assets that we have on our site to be extremely positive. We make every effort possible to provide accurate and thorough descriptions. The lots are sold, however, on an "as is, where is" basis with no guarantee or warranty. To ensure your satisfaction, we strongly recommend that you inspect this and every asset for which you are interested. We want to make sure that you are buying exactly what you need. This is part of our overall philosophy of an open and honest way of doing business.
To set up an inspection, please call us - North America +1.781.849.7667, Europe +44.118.901.6161, India +91.222.848.0883, Latin America +57.1.508.7908 or email us at firstname.lastname@example.org