Seidenader VI-40 Vial Inspection Machine, for Liquid filled Vials. This 5/10 mL, 2R, 6R, Automated Seidenader VI-40 Rotary Vial Inspection Machine is fitted with 72 Heads, and 8 Camera Stations, on its central turret.
The Vials to be Inspected are manually Trayed Off onto the 1300 mm Long X 300 mm Wide X 970 mm High Side guided Infeed Flat Belt Conveyor.
The worst of the rejected Vials are Discharged by the end mounted Gross Rejects Eject 1 Station, which is a 180 mm wide x 965 mm high Traying off Station
The Good Vials are Ejected via the 3 Sets of Right hand side mounted 180 mm wide x 965 mm high Eject Stations, 2,3, & 4.
The Partial Rejected Vials are Discharged via either the Left Hand side mounted 180 mm wide x 965 mm high Eject Station 5, for where Particles are detected, or Eject Station 6, for Cosmetic Defects, or Eject Station 7, for Not Inspected / Special Vials
Included with the machine, is 7 off 8-Shelf Tooling C/Parts Storage Cabinets, mostly complete, with pull out Shelves.
The Vial Inspection M/c can inspect vials at speeds up to 24,000 vials per hour (depending on application)
The machine is capable of having a further 5 off Inspection cameras added to the 8 off already installed on the turret.
Please Note; When rebuilding & re-commissioning the now carefully dismantled machine, please ensure that the top mounted Discharge section Timing Belt is fitted so that the lower mechanical coupling timing marks are correctly aligned.
Please see attached brochure for additional information