Listing# 836775

Sentry Stainless Steel Conveyor Sections Mainly 3.5 Inch Rexnord Matt top Chain Drives VFD and EStop


Seller's Acceptable Currency:

$20,000.00 USD

Make An Offer

Location:  CA, USA

Level of Removal:  Uncrated/Loose

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you




Equipment Description
Sentry Stainless Steel Conveyor Sections Mainly 3.5 Inch Rexnord Matt top Chain Drives VFD and Stop

TF-3 3.25” LF879-TAB conveyor x 1’-9” long with down can catch pans.
TF-4A 3.25” LF879-TAB conveyor consisting of: 9’-7.43” straight
TF-4B 3.25” LF879-TAB conveyor consisting of: 90° turn (24” radius)
TF-4C 3.25” LF879-TAB conveyor consisting of: 1’-3.63” straight
TF-5 3.25” LF879-TAB to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, 1 HP drive motor.
TF-6A 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-6B 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-7 3.25” HP8505 to 3.25” LF879-TAB PTU x 4’-0” long with drive end, idle end, 1 HP drive motor.
TF-8A 3.25” LF879-TAB conveyor consisting of: 5’-1.85” straight
TF-8B 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-8C 3.25” LF879-TAB conveyor consisting of: 1’-8.48” straight
TF-8D 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-9 3.25” LF879-TAB to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, 1 HP drive motor.
TF-10A 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-10B 3.25” HP8505 conveyor consisting of: 5’-11.31” long section
TF-11 3.25” HP8505 to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-12A 3.25” HP8505 conveyor consisting of: 3’-3.37” long section
TF-12B 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-13 3.25” HP8505 to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-14A 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-14B 3.25” HP8505 conveyor consisting of: 9’-6.39” long section
TF-15 3.25” HP8505 to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-16 3.25” HP8505 conveyor x 2’-0” long. **connected to Arol Capping machine**
TF-17 3.25” HP8505 conveyor x 3’-2.96” long.
TF-18 "3.25” HP8505 to 3.25” LF879-TAB to 7.5” HP8505 reject conveyor x 8’-0” long with (2)
drive ends, (2) idle ends, jackshaft, 1 HP drive motor, and stainless steel surge table."
TF-19A 3.25” LF879-TAB conveyor consisting of: 90° turn (24” radius)
TF-19B 3.25” LF879-TAB conveyor consisting of: 7’-4.94” straight
TF-19C 3.25” LF879-TAB conveyor consisting of: 90° turn (24” radius)
TF-19D 3.25” LF879-TAB conveyor consisting of: 4’-6” straight
TF-20 3.25” LF879-TAB to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-21A 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-21B 3.25” HP8505 conveyor consisting of: 7’-5.56” long section
TF-22 3.25” HP8505 to 3.25” LF879-TAB PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-23A 3.25” LF879-TAB conveyor consisting of: 7’-7.34” straight
TF-23B 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-23C 3.25” LF879-TAB conveyor consisting of: 3’-2.33” straight
TF-23D 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-23E 3.25” LF879-TAB conveyor consisting of: 4’-0” straight
TF-24A 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-24B 3.25” HP8505 conveyor consisting of: 3’-0” long section
TF-25 3.25” HP8505 to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-26A 3.25” HP8505 conveyor consisting of: 3’-3.37” long section
TF-26B 3.25” HP8505 conveyor consisting of: 10’-0” long section
TF-27 3.25” HP8505 to (2) 3.25” LF879-TAB PTU x 4’-0” long with drive end, idle end, manual removable gate and 1 HP drive motor.
TF-28A 3.25” LF879-TAB conveyor consisting of: 1’-0” straight
TF-28B 3.25” LF879-TAB conveyor consisting of: 90° turn (36” radius)
TF-28C 3.25” LF879-TAB conveyor consisting of: 90° turn (36” radius)
TF-28D 3.25” LF879-TAB conveyor consisting of: 4’-0” straight
TF-29A 3.25” LF879-TAB conveyor consisting of: 1’-11.12” straight
TF-29B 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-29C 3.25” LF879-TAB conveyor consisting of: 8’-1.04” straight
TF-29D 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-29E 3.25” LF879-TAB conveyor consisting of: 1’-0” straight
TF-30 3.25” LF879-TAB to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor.
TF-31 3.25” HP8505 conveyor x 2’-0.51” long. ***connected to Arol Capping machine***
TF-32 3.25” HP8505 conveyor x 8’-1.86” long.
TF-33 "3.25” HP8505 to 3.25” LF879-TAB to 7.5” HP8505 reject conveyor x 8’-0” long with (2)
drive ends, (2) idle ends, jackshaft, 1 HP drive motor, and stainless steel surge table."
TF-34A 3.25” LF879-TAB conveyor consisting of: 2’-0.66” straight
TF-34B 3.25” LF879-TAB conveyor consisting of: 90° turn (24” radius)
TF-34C 3.25” LF879-TAB conveyor consisting of: 0’-6.56” straight
TF-34D 3.25” LF879-TAB conveyor consisting of: 90° turn (24” radius)
TF-34E1 3.25” LF879-TAB conveyor consisting of: 5’-0” long straight
TF-34E2 3.25” LF879-TAB conveyor consisting of: 5’-6” long straight
TF-35 3.25” LF879-TAB to 3.25” LF879-TAB PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor
TF-36A1 3.25” LF879-TAB conveyor consisting of: 5’-0” long straight
TF-36A2 3.25” LF879-TAB conveyor consisting of: 5’-5.74” long straight
TF-36B 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-36C 3.25” LF879-TAB conveyor consisting of: 3’-0.20” straight
TF-36D 3.25” LF879-TAB conveyor consisting of: 30° turn (24” radius)
TF-36E 3.25” LF879-TAB conveyor consisting of: 2’-6” straight
TF-37 3.25” LF879-TAB to 3.25” HP8505 PTU x 4’-0” long with drive end, idle end, and 1 HP drive motor
TF-38 3.25” HP8505 conveyor x 9’-6.03” long.
TF-39 3.25” HP8505 & (2) 3.25” LF879-TAB to (3) 3.25” HP8505 PTU x 6’-0” long with (4) drive ends, (3) idle ends, change part guides, and (2) 1 HP drive motors.
TF-40A (2) 3.25” HP8505 to (5) 3.25” HP8505 to 24” HP8505 Slow Down Module with (7) drive ends, (6) idle ends, (5) jackshafts, and 1 HP drive motor. Consisting of: 5’-9” long section
TF-40B (2) 3.25” HP8505 to (5) 3.25” HP8505 to 24” HP8505 Slow Down Module with (7) drive ends, (6) idle ends, (5) jackshafts, and 1 HP drive motor. Consisting of: 10’-0” long section
TF-41 24” HP8505 conveyor x 3’-11.04” long.
TF-42 24” HP8505 conveyor x 2’-5.24” long.

Specifications:
Standard
Metric
Manufacturer Name
Sentry Equipment
 

Year:
2016
2016

Air Requirements:
90 PSI
90 PSI

Material of Construction:
STAINLESS STEEL
STAINLESS STEEL

Drive Horsepower:
1
1

Type of Conveyors:
BELT CONVEYOR
BELT CONVEYOR

Type of Conveyor Belt:
Matt Top chain
Matt Top chain

Guide Rails:
YES
YES

Type of Feet:
ADJUSTABLE
ADJUSTABLE


Dimensions:
Standard
Metric

Overall:
0 x 0 x 80 IN - 2500 LBS
0.00 x 0.00 x 2032.00 mm - 1134.00 kg

Disclaimer

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

CA

This equipment is subject to a removal and loading charge.


The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.

Customers who viewed this item also viewed this