Listing# 897913

UNUSED 250 bbl Brewhouse Including Major Components

THIS IS A MULTI-LISTING. VIEW INDIVIDUAL LISTINGS BY SCROLLING DOWN.

Seller's Acceptable Currency:

$1,250,000.00 USD

Make An Offer

Location:  CA, USA

Level of Removal:  Still Installed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

This equipment will be available for removal on or after 9/13/2022. If you need the equipment before please contact sales.




UNUSED 250 bbl Brewhouse Including Major Components

Multi-Listing Includes:

  • Unused Rolec GmbH Mash Tun Kettle Total Vessel Content Is 367 bbl



  • Back to Top
    Multi-Listing #827061

    Unused Rolec GmbH Mash Tun Kettle Total Vessel Content Is 367 bbl




    Equipment Description
    Rolec GmbH Mash Tun Kettle Total Vessel Content Is 367 bbl

  • Mask Kettle is a complete pre-fabricated unit

  • Technical kettle data:
    Minimal mash volume: 45 bbl (52 hl)
    Maximal mash volume: 270 bbl (317 hl)
    Total vessel content: 367 bbl (430 hl)
    Inside diameter: 3700 mm
    Shell height: 3500 mm
    Mash inlet/outlet: 200 mm
    Vapor vent diameter: 500 mm
    Energy source: saturated steam
    Steam pressure: 1 bar (15 PSI) over pressure
    Heating rate at largest mash: 0,7 °C per minute

  • Kettle bottom:
    Shape: 20° cone bottom
    with welded agitator flange, centered mash outlet
    Made of: stainless steel 304
    Material strength: 5 mm
    Surface treatment: IIIc (2B)
    Weld finish on product side: acid treated
    Heat surface area: 8,5 m²

  • Kettle shell:
    Side shell design: cylindrical shell
    Made of: stainless steel 304
    Strength: 3 mm
    Surface treatment outside: IIIc (2B)
    Surface treatment inside: IIIc (2B)
    Weld finish product side: acid treated
    Heat surface area: 2 x 10 m²

  • Kettle top:
    Hood design: 25° top cover
    Material: stainless steel 1.4301 (304)
    Strength: 3 mm
    Surface treatment outside: polished
    Surface treatment inside: IIIc (2B)
    Weld finish: acid treated
    Openings for: man way, vapor stack, inner lighting

  • Agitator:
    Kettle drive: bottom mounted aggregate, variable speed motor with frequency controller, placed in control cabinet
    Agitator shaft: solid shaft made of stainless steel 304, grooved, with stainless steel lock to fix the agitator blade
    Agitator blade: solid blade made of stainless steel 304, shaped and designed to handle thick mashes and assure gentle but efficient mixing of the mash
    Shaft seal: high temperature resistant rope packing for food processing equipment, with stainless steel fixtures and rope locks, drip catch with drain tube to protect the drive
    Mash kettle equipment: 1 kettle lighting fixture, mounted on kettle top, equipped with halogen light 70 W 1 temperature transmitter PT 100, welded into the lower part of the kettle, 1 CIP setup inside the kettle

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse

    Voltage:
    480 VOLTS
    480 VOLTS

    Frequency:
    60 HERTZ
    60 HERTZ

    Phase:
    3
    3


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Rolec GmbH Lautertun 7600 MM Inner Diameter



  • Back to Top
    Multi-Listing #827062

    Unused Rolec GmbH Lautertun 7600 MM Inner Diameter




    Equipment Description
    Unused Rolec GmbH Lautertun 7600 MM Inner Diameter

  • High performance lauter tun with following construction features:
    Type: Closed lauter system made of stainless steel, collected in one central lauter pipe leading to the lauter pump. In the upstream side of the system is the flow control valve, a sample port and a view port installed. The piping directs haze wort back to the lauter tun and lauter wort to the kettle

  • Technical data:
    Grist load IPA: approx. 14355 lbs. (6525 kg) at 14,8° P
    Specific area grist load: 144 kg/m² at 6525 kg grist charge
    Grist load Hop Stupid : approx. 18150 lbs. (8250 kg) at 17,8° P
    Specific area grist load: 182 kg/m² at 8250 kg grist charge
    Inner diameter: 7600 mm
    Surface area: 45,3 m²
    Height of side walls: 1500 mm

  • Lauter tun bottom:
    Shape: straight, leveled bottom, with welded in central rake system flange
    Made of: stainless steel 304
    Strength: 10 mm
    Surface treatment: IIIc (2B)
    Weld finish product side: grinded
    Bottom openings: 1 spent grain outlet DN 1000, 2 mash inlets DN 200, 64 openings for lauter collecting system,
    50 water inlets for bottom cleaning nozzles

  • Lauter tun shell:
    Side shell design: cylindrical shell
    Made of: stainless steel 304
    Strength: 4 mm
    Surface treatment outside: IIIc (2B)
    Surface treatment inside: IIIc (2B)
    Weld finish product side: acid treated

  • Lauter tun top:
    Hood design: 25° top cover
    Material: stainless steel 1.4301 (304)
    Strength: 4 mm
    Surface treatment outside: polished
    Surface treatment inside: IIIc (2B)
    Weld finish outside: grinded
    Openings for: man way, vapor stack, inner lighting

  • Manway:
    As Round manway: stainless steel body Ø = 500 mm, lid with stainless steel frame, hinged on one side, with four lock nuts with plastic grip, glass insert 500 mm, equipped with electronic safety feature

  • Lauter Screen:
    Type high performance lauter bottom with milled slots
    Made of: stainless steel 304
    Material strength: 4 mm
    Open surface: 12 % (of total surface)
    Slot configuration: 0,7 x 72 mm
    Bottom fixing: The segments are zipped with each other. All segments are equipped with 20 mm spacers resting on
    the vessel bottom. Further, the inner segments are resting on the welded drive flange. The outer segments are resting on a stainless steel support, welded around the lower vessel shell

  • Lautering system:
    Type: Closed lauter system made of stainless steel, collected in one central lauter pipe leading to the lauter pump. In the upstream side of the system is the flow control valve, a sample port and a view port installed. The piping directs haze wort back to the lauter tun and lauter wort to the kettle
    Flow control: frequency control of lauter pump and automatic
    flow control valve for the lauter speed
    Control parameters: inductive flow monitoring
    differential pressure monitoring

  • Sparging system:
    Type: central sparge system with spray heads
    Water supply pipe: stainless steel 304
    Water supplied from: automatic water mixing station
    Other features: continuous sparking feature, including a modulating sparge water valve synchronized with the
    lauter wort inductive flow meter

  • Rake system:
    Motor and gear box: bottom mounted aggregate
    variable speed motor
    with frequency controller
    Rake shaft: solid shaft made of stainless steel 304
    with stainless steel key to fix the rake
    Rake design: 4 -armed rake made of stainless steel 304, fixed on
    the agitator shaft. The rake arms are equipped with
    fixtures to hold the knives

  • Knives:
    Material: stainless steel 304
    Total length of knives: 450 mm
    Total number of knives: 60 pc.

  • GEA 3KW Centrifugal Pump, serial no: 989665080000

  • *Please note: the screen, motor & gearbox described above is being retained by the seller and is NOT INCLUDED with the Lauter

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse that was installed and never had product run through it
  • VFD's has been removed from the panels by the seller

  • More detailed information & on site inspections available on request

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse

    Voltage:
    480 VOLTS
    480 VOLTS

    Frequency:
    60 HERTZ
    60 HERTZ

    Phase:
    3
    3


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Rolec GmbH Spent Grain Tank With Spent Grain Pump



  • Back to Top
    Multi-Listing #830373

    Unused Rolec GmbH Spent Grain Tank With Spent Grain Pump



    Equipment Description
    Unused Rolec GmbH Spent Grain Tank With Spent Grain Pump

  • Stainless steel construction
  • Cone bottom
  • Spent grain Pump Technical Data:
    Netzsch NEMO Progressive Cavity Pump discharge with 40 HP 230/460/3/60Hz motor drive (missing pump rotor & discharge end)
    Pump design: Excenter pump
    Transfer media: spent grain
    Moisture content of grain: approx. 80%
    Temperature of grain: appox. 70 °C
    Capacity: 55 m³/h
    Max. working pressure: 12 bar
    Buffer vessel material: Stainless steel 304
    Buffer vessel content: 5 m³
    Ø of pressure line: DN 250
    Max. length of press. line: 50 m
    ? Hmax. : 20 m
    Material:
    Casing: GG 25
    Shaft: stainless steel, Nr. 1.4301
  • On legs

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse

    Voltage:
    480 VOLTS
    480 VOLTS

    Frequency:
    60 HERTZ
    60 HERTZ

    Phase:
    3
    3


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Rolec GmbH Sauer Wort Acidification Agitated Tank 328 bbl



  • Back to Top
    Multi-Listing #830374

    Unused Rolec GmbH Sauer Wort Acidification Agitated Tank 328 bbl



    Equipment Description
    Unused Rolec GmbH Sauer Wort Acidification Agitated Tank 328 bbl

  • 10,168 gallon stainless steel tank

  • Technical kettle data:
    Total content: 328 bbl (393 hl)
    Inner diameter: 3300 mm
    Height of sidewalls: 4500 mm
    Total height (approx): 6300 mm
  • Kettle bottom:
    Shape: 20 ° cone bottom
    Made of: stainless steel 304
    Material strength: 4 mm
    Surface treatment: IIIc (2B)
    Weld finish on product side: Acid treated
    Wort inlet/outlet: DN 200, in bottom center
    Heat surface area: 6 m²
  • Agitator: 1 magnetic system, bottom mounted, 3,7 kW
  • Kettle shell:
    Side shell design: cylindrical shell
    Made of: stainless steel 304
    Strength: 3 mm
    Surface treatment outside: IIIc (2B)
    Surface treatment inside: IIIc (2B)
    Weld finish product side: acid treated
    Shell man way: 440 x 350 mm
  • Kettle top:
    Hood design: 25° top cover
    Material: stainless steel 1.4301 (304)
    Strength: 3 mm
    Surface treatment outside: grinded
    Surface treatment inside: IIIc (2B)
    Weld finish outside: grinded
    Openings for: vapor stack

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System




  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Capacity Size:
    10168 G
    10168 G

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Rolec GmbH 340 bbl 42250 Liter Stainless Steel Tank



  • Back to Top
    Multi-Listing #830385

    Unused Rolec GmbH 340 bbl 42250 Liter Stainless Steel Tank



    Equipment Description
    Unused Rolec GmbH 340 bbl 42250 Liter Stainless Steel Tank

  • Energy Storage Tank Description:
    The tank is intended to be filled with water, which will remain in this tank. It is heated at the
    time of the wort boil by the vapor condenser. The so generated hot water will be taken later
    to heat the collected lauter wort from approx. 161,6 °F (72°C) to 199,4 °F (93°C).
    Net content: 340 bbl (400 hl)
    Operating pressure: atmospheric
    Temperature: 95 °C
    Insulation:
    Thickness of insulation: 100 mm (4”)
    Material of insulation: Perlite
    Clad over insulation: stainless steel 1.4301, all welded
    Tank support:
    On height adjustable feet (with stainless steel plates for bottom);
    Technical tank:
    Strength side wall: 3 mm
    Strength of bottom: 3 mm
    Strength of clad sheeting: 2 mm
    Material inner tank: stainless steel 1.4404 (316)
    Material cover outside: stainless steel 1.4301 (304)
    Surface treatment inside: IIIc (2B)
    Surface treatment outside: IIIc (2B)
    Treatment inner welds: Acid treated
    Treatment outer welds: Acid treated and brushed
    Dimension:
    Inner diameter: 2900 mm
    Height of sidewalls: 6000 mm
    Total height (approx): 7700 mm
    Hood and bottom: with 20 °cone

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2017
    2017

    Serial Number:
    15074-11
    15074-11

    Capacity Size:
    10168 G
    10168 G

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Grundfos B98441024P11801 Inline Centrifugal Pump



  • Back to Top
    Multi-Listing #830390

    Unused Grundfos B98441024P11801 Inline Centrifugal Pump



    Equipment Description
    Grundfos B98441024P11801 Inline Centrifugal Pump

  • Type: CRN64
  • 7.50 KW
  • 77 m3/H
  • Specifications:
    Type: centrifugal pump
    Manufacturer: Grundfos
    Model: CRN 90-1-1
    Capacity: 485 Gpm (1100 hl/h) against 20 m
    Speed: n = 3400 min-1
    Material: stainless steel 1.4401
  • Intended use: To supply the wort heat exchanger with hot water to heat the lauter wort

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Grundfos
     

    Serial Number:
    0001
    0001

    CE Marked:
    YES
    YES

    Model:
    B98441024P11801
    B98441024P11801

    Capacity Speed:
    77 CU M/HR
    77 CU M/HR

    Frequency:
    60 HERTZ
    60 HERTZ

    Material of Composition:
    stainless steel 1.4401
    stainless steel 1.4401


    Dimensions:
    Standard
    Metric

    Overall:
    24 x 24 x 48 IN - 150 Pounds
    609.60 x 609.60 x 1219.20 mm - 68.04 kg

  • Unused Grundfos B9885640P-11609 Inline Centrifugal Pump



  • Back to Top
    Multi-Listing #830391

    Unused Grundfos B9885640P-11609 Inline Centrifugal Pump



    Equipment Description
    Unused Grundfos B9885640P-11609 Inline Centrifugal Pump

  • Type CRN90
  • 11.0 KW
  • 108 m3/H
  • Type: centrifugal pump
    Manufacturer: Grundfos
    Model: CRN 90-1-1
    Capacity: 485 Gpm (1100 hl/h) against 20 m
    Speed: n = 3400 min-1
    Material: stainless steel 1.4401
    Intended use: To supply the wort heat exchanger with hot water to heat the lauter wort

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Grundfos
     

    Serial Number:
    7373
    7373

    CE Marked:
    YES
    YES

    Model:
    B9885640P-11609
    B9885640P-11609

    Capacity Speed:
    108 CU M/HR
    108 CU M/HR

    Frequency:
    60 HERTZ
    60 HERTZ

    Material of Composition:
    stainless steel 1.4401
    stainless steel 1.4401


    Dimensions:
    Standard
    Metric

    Overall:
    24 x 24 x 48 IN - 150 LBS
    609.60 x 609.60 x 1219.20 mm - 68.04 kg

  • Unused Hilge GmbH Co. KG Euro-HYGIA II ADY 100/100/7.5/4 Hygienic Centrifugal Pump



  • Back to Top
    Multi-Listing #830403

    Unused Hilge GmbH Co. KG Euro-HYGIA II ADY 100/100/7.5/4 Hygienic Centrifugal Pump



    Equipment Description
    Hilge GmbH Co. KG Euro-HYGIA II ADY 100/100/7.5/4 Hygienic Centrifugal Pump

  • Sanitary and hygienic centrifugal pump
  • 7.5KW motor drive

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Hilge GmbH Co. KG
     

    Year:
    2016
    2016

    Serial Number:
    989665100000
    989665100000

    CE Marked:
    YES
    YES

    Model:
    Euro-HYGIA II ADY 100/100/7.5/4
    Euro-HYGIA II ADY 100/100/7.5/4

    Capacity Speed:
    1750 RPM
    1750 RPM

    Material of Construction:
    STAINLESS STEEL
    STAINLESS STEEL

    Horsepower:
    7.5 KW
    7.5 KW


    Dimensions:
    Standard
    Metric

    Overall:
    36 x 24 x 36 IN - 150 Pounds
    914.40 x 609.60 x 914.40 mm - 68.04 kg

  • Unused Rolec GmbH 273 bbl 38474 Liter Stainless Steel Tank Wort Kettle And Heat Exchanger



  • Back to Top
    Multi-Listing #830433

    Unused Rolec GmbH 273 bbl 38474 Liter Stainless Steel Tank Wort Kettle And Heat Exchanger



    Equipment Description
    Unused Rolec GmbH 273 bbl 38474 Liter Stainless Steel Tank Wort Kettle And Heat Exchanger

  • Technical data:
    Hot cast out volume: 273 bbl (320 hl)
    Total content: 435 bbl (509 hl)
  • Inside diameter: 3800 mm
    Cylindrical shell height: 4200 mm
  • Kettle bottom:
    Shape: 20° cone bottom
    Made of: stainless steel 304
    Material strength: 5 mm
    Surface treatment: IIIc (2B)
    Weld finish on product side: acid treated
    Wort inlet/outlet: DN 300
    in bottom centre
  • Kettle shell:
    Side shell design: cylindrical shell
    Made of: stainless steel 304
    Strength: 3 mm
    Surface treatment outside: IIIc (2B)
    Surface treatment inside: IIIc (2B)
    Weld finish product side: acid treated
  • Kettle top:
    Shape: 25° cone
    Made of: stainless steel 304
    Material strength: 3 mm
    Surface treatment: Grinded
    Man way: stainless steel body Ø = 500 mm,
    lid with stainless steel frame, hinged on one side,
    with four lock nuts with plastic grip,
    glass insert 500 mm,
    equipped with electronic safety feature

  • Heat Exchanger Description:
    Vertical tube heat exchanger, designed to retract the energy content of the brüden (vapor)
    generated during the wort boiling process and exchange it into the water of the energy storage tank.
    Technical data:
    Material tubs: stainless steel 1.4301
    Material housing: stainless steel
    Vapor volume max.: 5632 lbs/h (2560 kg/h)
    Water temperature inlet: 74 ° C
    Water temperature outlet: 95 ° C
    Condensate temperature: 99° C

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2017
    2017

    Capacity Size:
    10167.14 gal
    38474 L

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    1 x 1 x 1 IN - 1 LBS
    25.40 x 25.40 x 25.40 mm - 0.45 kg

  • Unused Rolec GmbH 2500 Liter Hot Caustic Tank Stainless Steel Construction



  • Back to Top
    Multi-Listing #830436

    Unused Rolec GmbH 2500 Liter Hot Caustic Tank Stainless Steel Construction



    Equipment Description
    Unused Rolec GmbH 2500 Liter Hot Caustic Tank Stainless Steel Construction

  • Total content: 2500 l
    Inside tank diameter: 1250 mm
    Insulation: 50 mm
    Outside tank diameter: 1350 mm
    Cylindrical tank height: 2000 mm
    Overall tank height: 3150 mm
    Vessel bottom:
    Type: 25° conical bottom
    Material: Stainless steel 1.4571 (316)
    Material strength: 3 mm
    Surface: IIIc (2B)
    Welds: Acid treated
    Cylindrical shell:
    Material: Stainless steel 1.4571 (316)
    Material strength: 3 mm
    Surface: IIIc (2B)
    Welds: Acid treated
    Tank top:
    Type: 15° conical bottom
    Material: Stainless steel 1.4571 (316)
    Material strength: 3 mm
    Surface: IIIc (2B)
    Welds: Acid treated
    Man way door: Hinged lid 400 mm

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Capacity Size:
    660.65 gal
    2500 L

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    53.15 x 53.15 x 124.02 in - 2204.60 lb
    1350 x 1350 x 3150 MM - 1000 KGS

  • Unused APV Stainless Steel Plate Heat Exchanger



  • Back to Top
    Multi-Listing #830445

    Unused APV Stainless Steel Plate Heat Exchanger



    Equipment Description
    APV Stainless Steel Plate Heat Exchanger

  • Stainless steel plates

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    APV
     

    Type of Heat Exchanger:
    PLATE AND FRAME
    PLATE AND FRAME

    Plate Material of Construction:
    STAINLESS STEEL
    STAINLESS STEEL

    Frame Material of Construction:
    CARBON STEEL
    CARBON STEEL


    Dimensions:
    Standard
    Metric

    Overall:
    96 x 36 x 60 IN - 2500 LBS
    2438.40 x 914.40 x 1524.00 mm - 1134.00 kg

  • Unused APV Stainless Steel Plate Heat Exchanger



  • Back to Top
    Multi-Listing #830446

    Unused APV Stainless Steel Plate Heat Exchanger



    Equipment Description
    APV Stainless Steel Plate Heat Exchanger

  • Stainless steel plates

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    APV
     

    Type of Heat Exchanger:
    PLATE AND FRAME
    PLATE AND FRAME

    Plate Material of Construction:
    STAINLESS STEEL
    STAINLESS STEEL

    Frame Material of Construction:
    CARBON STEEL
    CARBON STEEL


    Dimensions:
    Standard
    Metric

    Overall:
    96 x 36 x 60 IN - 2500 LBS
    2438.40 x 914.40 x 1524.00 mm - 1134.00 kg

  • Unused Rolec GmbH Stainless Steel 427 bbl Whirlpool



  • Back to Top
    Multi-Listing #830466

    Unused Rolec GmbH Stainless Steel 427 bbl Whirlpool




    Equipment Description
    Unused Rolec GmbH Stainless Steel 427 bbl Whirlpool

  • Technical data:
    Total content: 427 bbl (500 hl)
    Inside diameter: 5000 mm (16' - 4 8/10")
    Shell height: 2500 mm (8' - 2 4/10")
    Whirlpool bottom:
    Shape: straight bottom with 2% slope
    1 wort outlet DN 100
    1 trub outlet DN 100
    Material: stainless steel 1.4301 (304)
    Strength: 4 mm
    Surface treatment: IIIc (2B)
    Weld finish: grinded
    Whirlpool shell:
    Side shell: cylindrical shell, with
    1 wort draw DN 100
    1 tangential wort inlet 100 mm
    Material: stainless steel 1.4301 (304)
    Strength: 3 mm
    Surface treatment outside: grinded
    Surface treatment inside: IIIc (2B)
    Weld finish: grinded
  • Whirlpool top:
    Top shape: 25° hood
    Material: stainless steel 1.4301 (304)
    Strength: 3 mm
    Surface treatment outside: grinded
    Surface treatment inside: IIIc (2B)
    Weld finish: Acid treated
    Opening cut in for: round man way
    vapor stack
    inner lighting

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Capacity Size:
    660.65 gal
    2500 L

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    53.15 x 53.15 x 124.02 in - 2204.60 lb
    1350 x 1350 x 3150 MM - 1000 KGS

  • Unused Hilge GmbH Co. KG Euro-HYGIA II ADY 80/80/7.5/2 Hygienic Centrifugal Pump



  • Back to Top
    Multi-Listing #830468

    Unused Hilge GmbH Co. KG Euro-HYGIA II ADY 80/80/7.5/2 Hygienic Centrifugal Pump



    Equipment Description
    Unused Hilge GmbH Co. KG Euro-HYGIA II ADY 80/80/7.5/2 Hygienic Centrifugal Pump

  • Hygenic sanitary centrifugal pump
  • 7.5 KW

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Hilge GmbH Co. KG
     

    Year:
    2016
    2016

    Serial Number:
    989665490000
    989665490000

    CE Marked:
    YES
    YES

    Model:
    Euro-HYGIA II ADY 80/80/7.5/2
    Euro-HYGIA II ADY 80/80/7.5/2

    Capacity Speed:
    3450 RPM
    3450 RPM

    Material of Construction:
    STAINLESS STEEL
    STAINLESS STEEL

    Horsepower:
    7.5 KW
    7.5 KW

    Frequency:
    60 HERTZ
    60 HERTZ

    Phase:
    3
    3


    Dimensions:
    Standard
    Metric

    Overall:
    36 x 24 x 36 IN - 150 LBS
    914.40 x 609.60 x 914.40 mm - 68.04 kg

  • Unused Rolec GmbH Six 300 Liter Stainless Steel Hopping Station Vessels



  • Back to Top
    Multi-Listing #830472

    Unused Rolec GmbH Six 300 Liter Stainless Steel Hopping Station Vessels



    Equipment Description
    Unused Rolec GmbH Six 300 Liter Stainless Steel Hopping Station Vessels

  • Design specifications:
    Material: stainless steel 304
    Construction: Round, cylindrical built vessel
    Bottom: conical shaped
    Top: dished top with cover lid and lock
    Number of hop vessels: 6
    Net content of vessels: 300 l (to hold 200 lbs of hop pellets)
    Diameter of vessel: 800 mm
    Shell height of vessel: 700 mm
    Vessel bottom: Conical
    Working principle: flushing with hot kettle wort
    Filling of vessel: from top

  • Mezzanine frame & platform

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • VFD has been removed from the panel
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Capacity Size:
    79.28 gal
    300 L

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    0.04 x 0.04 x 0.04 in - 2.20 lb
    1 x 1 x 1 MM - 1 KGS

  • Unused Rolec GmbH 1400 Liter Stainless Steel Sugar Dosing Vessel



  • Back to Top
    Multi-Listing #830478

    Unused Rolec GmbH 1400 Liter Stainless Steel Sugar Dosing Vessel



    Equipment Description
    Unused Rolec GmbH 1400 Liter Stainless Steel Sugar Dosing Vessel

  • Design specifications:
    Material: stainless steel 304
    Construction: Round, cylindrical built vessel
    Bottom: conical shaped
    Top: dished top with cover lid and lock
    Net content of vessels: 1400 l
    Diameter of vessel: 1100 mm
    Shell height of vessel: 1500 mm
    Vessel bottom: Conical
    Working principle: flushing with hot kettle wort
    Filling of vessel: from top

  • Step & frame mounted

  • This is part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse whose major components were installed & project left unfinished and never had product run through it
  • More detailed information available on request on the complete Brewhouse System

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    Rolec Prozess-und Brautechnik GmbH
     

    Year:
    2016
    2016

    Capacity Size:
    369.96 gal
    1400 L

    Products Run:
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse
    UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse


    Dimensions:
    Standard
    Metric

    Overall:
    59.06 x 59.06 x 78.74 in - 2204.60 lb
    1500 x 1500 x 2000 MM - 1000 KGS



Disclaimer

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

CA

This equipment is subject to a removal and loading charge.


The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.

Customers who viewed this item also viewed this