Listing# 836620

Unused EBD Enclosed Vertical CATHETER LAMINATOR


Seller's Acceptable Currency:

$30,000.00 USD

Make An Offer

Location:  UT, USA

Level of Removal:  Uncrated/Loose

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you





Equipment Description
EBD Enclosed Vertical CATHETER LAMINATOR

SPECIFICATIONS
  • INPUT POWER: 208-240 VAC, single phase, 50/60 Hz. Full load current draw is 16A.
  • WEIGHT: 720 lbs.
  • DIMENSIONS: 52” wide X 110” tall X 30” deep (32” with door handles). Door clearance is 24”
  • PRODUCT SIZE: .010 to .188” diameter, 65 to 72” long.
  • SAFETY: This machine complies with all NFPA’79 electrical standards and meets CE safety, wiring
    and emissions standards. This machine is CE certified for international use.
  • MANDREL MOUNTING: By tapered fitting (no vacuum).
    RANGE & ACCURACY
  • Minimum/Maximum temperature 100 deg F - 650 deg F.
  • Temperature tolerance/error/accuracy +/- 5 deg C.
  • Minimum/Maximum speed 0.1 cm/sec. - 12.0 cm/sec.
  • Speed tolerance/error/accuracy +/- 0.012 cm/sec (0.1% of Max speed)
  • Minimum/Maximum Distance 0 cm - 200cm.
  • Distance tolerance/error/accuracy +/- 0.013 cm (0.005 inch)

    FEATURES
  • The two vertical actuators each support a double lamination chamber assembly and move parallel to
    the suspended catheter (total of 4 lamination areas).
  • Multiple speeds in multiple ranges per stored recipes.
  • Lamination chamber assemblies maintaining constant temperature per recipe setting.
  • Long heating chamber results in process speeds up to 10X as fast as forced air types.
  • Temperature difference between each side of a given chamber minimized by mixing the air through
    a central heater.
  • A programmable logic controller (PLC) is used to run all of the stored lamination programs.
  • A color touchscreen makes machine operation and recipe entry quick and easy.
  • Separated enclosures with interlocked doors allow independent use of each side.
  • Specifications are subject to change without notice.

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    EBD
     

    Capacity Speed:
    1 CU FT/MIN
    1 CU FT/MIN

    Voltage:
    120 VOLTS
    120 VOLTS

    Frequency:
    50/60 HERTZ
    50/60 HERTZ

    Phase:
    1
    1


    Dimensions:
    Standard
    Metric

    Overall:
    56 x 48 x 90 IN - 1200 LBS
    1422.40 x 1219.20 x 2286.00 mm - 544.32 kg

    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    UT

    This equipment is subject to a removal and loading charge.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.