Listing# 790332

Unused Krones Modufill HRS VKP 2.520-84-94 Filler And Capper In Original Shipping Crates

Seller's Acceptable Currency:

$350,000.00 USD

Make An Offer

Location:  CA, USA

Level of Removal:  Already Crated

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

This equipment will be available for removal on or after 9/13/2022. If you need the equipment before please contact sales.

Equipment Description
Krones Modufill HRS (VKP) 2.520-84-94 Filler And Capper crate 1

  • Manufactures Description:
    The short-tube level filler (S, H) combines the advantages of sturdy mechanical components with the flexibility of an electro-pneumatic controller. All filling process steps can be programmed easily and individually, and adjusted specifically to the respective combination of product and container. Filling speed and filling height are determined by a changeable vent tube (R), the cleaning is performed in a closed circuit. The filling is performed with the bottle pressed against the filling valve in single-chamber operation with counter-pressure. A single or double pre evacuation is used depending on the product. The machine has a pitch diameter of 99,21 inch (2.520) mm with 84 filling valves and a pitch of 3,70 inch (94) mm.
    The filling system is used mainly for products which are sensitive to oxygen such as beer and beer mixed beverages but allows also filling of soft drinks and water into glass and PET bottles. The well-proven filler is distinguished by its simple structure and its high reliability during continuous operation

  • Machine Design Specifications:
  • Filling system HRS ( = VKPV)
  • Carrousel pitch circle diameter 99,21 inch (2.520 mm)
  • Filling valves 84 PCE
  • Filler pitch 3,70 inch (94 mm)
  • Running direction * Carrousel after infeed clockwise (from left to right)
  • Product-contacting parts Besides stainless steels (rustproof stainless steel/chrome nickel steel, similar to AISI 304) the machine consists partially of non-metal materials, which are in direct contact with food or beverages. These materials are suitable for the contact with food in accordance with the valid EU Directives and global guidelines
  • Design of front table individual axis with synchronous servo motors
  • Front table Material: rust-proof stainless steel/chrome nickel steel similar to AISI 304)
  • Design of product tank ring bowl
  • Carrousel bottom part Material: painted cast iron
  • Design of lifting device pneumatic lift cylinder
  • Design of CIP cups manual
  • Container guidance * base handling
  • Sealings Material: EPDM
  • Standard room height * tentative assumption
  • Min. room height filler area * 157,48 inch (4.000 mm)
  • Guards height * 118,11 inch (3.000 mm)
  • Container transfer at filler infeed by infeed worm
  • Maximum possible container height * 13,78 inch (350 mm)
  • Minimum possible container height * 5,91 inch (150 mm)
  • Maximum possible container diameter * 3,66 inch (93 mm)
  • Minimum possible container diameter * 1,18 inch (30 mm)
  • Design of explosion protection is not included in KRONES scope of supply. Machine operation in potentially explosive areas or with potentially explosive material only allowed after KRONES approval

  • Capper 1 (18) Head
  • Design of capper 1 crown corker
  • Pitch circle diameter capper 1 21,26 inch (540 mm)
  • Number of heads capper 1 18 PCE
  • Pitch capper 1 3,70 inch (94 mm)
  • Manufacturer capper top part capper 1 make: KRONES
  • Lubrication top part, capper 1 * KRONES standard
  • Design of bottom part capper 1 for crowner
  • Lubrication bearing, capper 1 * KRONES standard
  • Height adjustment capper 1 automatic with bottle preselection
  • Clutch capper 1 not declutchable

  • Equipment 01.00, 12oz (0,355l) bottle
  • Infeed worm
  • Infeed base handling starwheel, d = 720 mm
  • Discharge base handling starwheel, d = 720 mm
  • Quick-change curved guides, carrousel infeed 720 mm, carrousel discharge 720 mm, base handling
  • Capper 1, base handling starwheels, d = 540 mm
  • Neck guide pitch circle 540 mm, crown corker
  • Discharge capper 1, base handling starwheel, d = 720 mm

  • Electrical cabinets, Allen-Bradley electrical

  • This was intended to be part of an UNUSED Rolec Prozess-und Brautechnik GmbH 250 bbl Brewhouse that was installed and never had product run through it
  • The Krones Bottle Filler, Capper & Labeler (separate listing number) are in their original seaworth shipping crates

  • More detailed information & on site inspections available on request

  • Specifications:
    Manufacturer Name

    Serial Number:

    Modufill HRS (VKP) 2.520-84-94
    Modufill HRS (VKP) 2.520-84-94

    Type of Filler:

    Current Application (Products,Sizes Run and Shape of Bottle):
    Set up for 12oz (0,355l) bottle
    Set up for 12oz (0,355l) bottle

    Application Range (Ex Min/Max Range Size Bottles or Tubes, Shape of Bottle):
    Brewery Bottle with a Tin Cap
    Brewery Bottle with a Tin Cap

    Number of heads:

    Pitch (center line from nozzle to nozzle):
    3,70 inch (94 mm)
    3,70 inch (94 mm)




    See all item dimensions

    Item #1:
    1 x 1.00 x 1.00 IN - 0.00 LBS
    1.00 x 1.00 x 1.00 IN - 1.00 Pounds

    Item #2:
    1 x 1.00 x 1.00 IN - 0.00 LBS
    1.00 x 1.00 x 1.00 IN - 1.00 Pounds

    2 x 1 x 1 IN - 2 LBS
    50.80 x 25.40 x 25.40 mm - 0.91 kg


    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in


    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.

    Customers who viewed this item also viewed this