Listing# 733896

Used 20 inch by 15 inch by 12 inch Acra CNC Drilling And Tapping Machining Center


Seller's Acceptable Currency:

$25,000.00 USD

Make An Offer

Location:  North America

Level of Removal:  Uncrated/Loose

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you




Equipment Description
ADT-500S Used 20”x15”x12” Acra CNC Drilling & Tapping Machining Center

  • Mitsubishi 64M Controller
  • Fully Traveling Column.
  • Low Inertia Spindle.
  • Spindle Speeds 60-8,000 RPM.
  • Rigid Tapping 3,000 RPM.
  • 180 Degree Swing Table Design.
  • APC Time (5 Sec.)
  • High Repeatability Accuracy.
  • Minimized Floor Space

    Specifications:

    Spindle:

  • Spindle Taper Nose: BT-30
  • Spindle Pull Stud: 45 Degree
  • Max. Spindle Speeds: 8,000 RPM
  • Bearing Contact Angle: 15 Degree
  • Bearing Type & Class: 7009 P5
  • Belt Type: 5GT-960-30
  • Spindle Dia.: 1.77”
  • Spindle Shaft Hardness: HRC 60 Degree +/- 2
  • Clamping Force: 3~3.5 KN

    Driver:
  • Spindle Motor: 5/3 HP
  • X Drive Motor: 1.3 HP
  • Y Drive Motor: 1.3 HP
  • Z Drive Motor: 1.3 HP

    Working Area:
  • X Axis Travel: 20”
  • Y Axis Travel: 15”
  • Z Axis Travel: 12”
  • Spindle Center to Column: 17.7”
  • Spindle End of Table: 7”~18.8”
  • Table Size (LxW): 23.6” x 15.7”
  • T-Slot Width x Number: .55 x 3
  • Max. Table Load: 550 lbs. x 2
  • APC: STD
  • Pallet Change Time: 5 seconds

    Axes:
  • X Ballscrew Dims: R32x 12,C3 Class
  • Y Ballscrew Dims: R32x 12,C3 Class
  • Z Ballscrew Dims: R32x 10,C3 Class
  • X/Y/Z Rapid Traverse: 36/36/30 M/min
  • Two/One Way Positioning Accuracy: 0.022/0.016 mm
  • Two/One Way Repeatability Accuracy: 0.012/0.006 mm
  • X Liner Motion Size: 1.37"
  • Y Liner Motion Size: 1.37”
  • Z Liner Motion Size: 1.18”

    ATC:
  • Magazine Capacity: 20+1
  • Tool Weight: 6.6 Lbs.
  • Max. Tool Length: 7.87”
  • Max. Tool Diameter: 2.75”
  • Tool Change Time (T-T): 0.8 seconds
  • Tool Change Time (C-C): 1.8 seconds

    Coolant System:
  • Coolant Pump: 620 Watts
  • Flow Rate: 100 L/min.
  • Tank Volume: 180 L

    Chip Flush System:
  • Chip Flush Type: Chain Type
  • Auto Chip Conveyor: Standard


  • Specifications:
    Standard
    Metric

    Manufacturer Name
    Acra Machinery Inc.
     

    Year:
    2003
    2003

    Model:
    ADT-S500
    ADT-S500

    Travel X-Axis:
    20 IN
    508.00 mm

    Travel Y-Axis:
    15 IN
    381.00 mm

    Travel Z-Axis:
    12 IN
    304.80 mm

    Type of Control:
    CNC
    CNC

    Control Model:
    Mitsubishi
    Mitsubishi

    Table Length:
    23.6 IN
    599.44 mm

    Table Width:
    15.7 IN
    398.78 mm

    Maximum Speed:
    8000 RPM
    8000 RPM

    Rapids on X:
    1417 IPM
    1417 IPM

    Rapids on Y:
    1417 IPM
    1417 IPM

    Rapids on Z:
    1181 IPM
    1181 IPM

    Tool Changer Capacity:
    20+1
    20+1

    Spindle Taper:
    BT-30
    BT-30

    Coolant Thru Spindle:
    NO
    NO

    chip Conveyor:
    YES
    YES

    Probing:
    NO
    NO

    Tool Length Measurement Probe:
    NO
    NO

    Voltage:
    220 VOLTS
    220 VOLTS

    Phase:
    3
    3

    Recommended Packaging Form:
    CUSTOM PALLET
    CUSTOM PALLET


    Dimensions:
    Standard
    Metric

    Overall:
    75 x 127 x 104 IN - 13500 LBS
    1905.00 x 3225.80 x 2641.60 mm - 6123.60 kg


    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    the USA.

    This equipment is subject to a removal and loading charge.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.

    Customers who viewed this item also viewed this