Used Acra MH-500 Horizontal Machining Center with Pallet Changer
Fanuc 0i-M controller
Automatic pallet changer(BP series)
Rotary table(indexing angle 0.001)
Linear scales for X. Y, Z-axis(Fagor)
Screw type chip disposal
Steel belt-type chip conveyor
Coolant through spindle system17 bar
Coolant system around the spindle
40 tools ATC
Spindle air blast system
Dual speed gearbox(AHM1000-2500)
Air conditioner for electrical cabinet
Full enclosure guarding
Auto lubrication unit
Protection covers for slideways
Signal tower light(3 stage)
X/Y/Z Axis Travels: 28”/25”/28”
Spindle Nose to Table Center: 6.2” ~ 34.6”
Spindle Center to Table Surface: 1.9” ~ 2.7”
Machining Area: 27.5” x 29.5”
Pallet Work Area: 19.6” x 19.6”
Maximum Pallet Load: 1,760 lbs.
Surface Configuration: M16 x P2.0 x 100 x 24
Pallet Height: 45.27”
Minimum Angle of Rotation: 0.001 Degrees
Pallet Exchange Method: Rotary
Spindle Transmission: Direct Coupling (Motor Spindle)
Spindle Taper: BT-40
Spindle Speed: 12,000 RPM
Spindle Bearing Diameter: 2.7”
Rapid Feed Rate (X/Y/Z): 36 m/min
Cutting Feed Rate (X/Y/Z): 800 mm/min
Ballscrew Diameter x Pitch: 50 x 12 mm
Linear Way Rail: Star 55/ 45 / Roller
Tool Capacity: 60
Maximum Tool Diameter: 3.9”
Maximum Tool Length: 11.8”
Maximum Tool Weight: 15.4 lbs.
Spindle Motor: 20 HP
X/Y/Z Axis Feed Motor: 6 HP/ 6.4 HP/ 6 HP
ATC Axis Feed Motor: 3.3 HP
Type of Control:
Rapids on X:
Rapids on Y:
Rapids on Z:
Tool Changer Capacity:
Coolant Thru Spindle:
Tool Length Measurement Probe:
180 x 220 x 120 IN - 34000 LBS
4572.00 x 5588.00 x 3048.00 mm - 15422.40 kg
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non-transferable.
Inspected, Guaranteed, Warranted and Refurbished Equipment
You can rest assured that when you see the EquipNet Certified logo on a listing that you will be buying equipment that has been inspected, tested, and in many cases fully refurbished. Please check the individual listing for specifics.
Guarantees & Warranties range from 30 to 180 Days!
For more information please feel free to speak with our knowledgeable representatives.
Why we recommend inspection
Why We Recommend Inspection!
We want your experience with EquipNet and with the assets that we have on our site to be extremely positive. We make every effort possible to provide accurate and thorough descriptions. The lots are sold, however, on an "as is, where is" basis with no guarantee or warranty. To ensure your satisfaction, we strongly recommend that you inspect this and every asset for which you are interested. We want to make sure that you are buying exactly what you need. This is part of our overall philosophy of an open and honest way of doing business.
To set up an inspection, please call us - North America +1.781.849.7667, Europe +44.118.901.6161, India +91.222.848.0883, Latin America +57.1.508.7908 or email us at email@example.com