Wanted Equipment - View equipment by type, industry, and location

The minimum would be 5,000 gallons (19,000 Liters). I’d need it to be externally jacketed with a large higher HP agitation auger or the horizontal style with the ribbon blending style of mixer. Being rated for a vacuum is a plus since I’ll be pulling vacuum on it, but having it stamped for that is not a necessity.

Dupont Cyrel 1000D Six Drawer Dryer equipment

looking for 700 square foot freeze dryer

Cytiva Cadence VI system

Looking for a PET filler + capper for ketchup. The bottle is like the typical Heinz 400ml. The filler must have 30 pistons at least. Preferred European manufacturers

30 ton bleach/Sodium hypochlorite storage tank required asap. Preferably UK location.

Millrock EPIC model (this is roughly twice the capacity of the Virtis)



Raw specs (Virtis size)

Shelf area minimum 18.6 square feet
Shelf pull down +20 C to -40 in 112 minutes, lowest shelf temp - 60c
Condenser pull down +20 to -45 in 47 minutes, lowest condenser temp -85c
Vacuum 100 millliTorr in 30 minutes
Condenser area 5.2 square feet minimum, volume 35 liters
No stoppering desired
Condenser 24 hour ice formation rate 20 liter

Round tea bag machine - 60 mm diameter round tea bag machine, with output in stacks of 10 bags each or 50 bags in round tins - Miflex ASKO-20 or similar make.

We are in need to purchase a ROVALVE item as below.

Valve, Knife Gate, ROVALVE Model S20-06, 6IN, Lugged Style, ANSI 150# RF Flanged Ends, FTF 2-1/4IN, With CF8M S.S Body, ASTM 4950 GBLB Stem & Nut, AFPL Packing, C/W 5-1/4"OD x 10" Long Cylinder Actuator, Suitable For Use With Trip Tank.. Manufacturer: TYCOFLOW. Mfr Part #: S20-06-CF8M.

need a vacuum chuck with model number 0010-56222, single zone at 450 degrees, brand AMAT.

Softgelatine manufacturing machine required

Tortilla Chip Line 500 kg/hr and above. Must be in great working condition

Potato Chip Lines from 1000 kg/per hour capacity and above. Must be in great working condition.

4-5 years old maximum

Looking for a glass returnable bottle line.
The requirements we have requested are below:
- 30.000bph RGB line for filling glass bottles in crates (1Lt bottle);
- 40.000bph RGB line for filling glass bottles in crates (25cl/50cl bottles);
- Suitable for still water and carbonated water;
- Bottles to be filled: 25cl, 50cl, 1Lt
- Bottle height: 181-290mm
- Bottle diameter: 58-89mm

Looking for a coating drum for food (coating dates with fine powder) Dates are sprayed with oil. These go to the powder drum and are coated with powder. Dry before packaging.

Vemag Process Check weigher

PI355 interleaver

Our company has scheduled the creation of a pilot plant in Algeria for alumina electrolysis to produce 20 tons of primary aluminum per day. Subsequently, we will make an extension to reach a capacity of 600 tons per day. We are looking for 4 new or used alumina electrolysis cells.

Technical specifications:
• Each cell should be capable of producing 4 tonnes of aluminum per day.
• Current intensity: 500,000 amperes per cell.
• Dimensions: Length: 16-18 meters; Width: 4 meters; Height: 1.5 meters.

The company which manufacturing these cells are as follows:
• Rusal (Russia)
• Rio Tinto (Canada)
• Sami-Chalco (China)
• Norsk Hydro (Norway)

Equipment to produce MCT-oil from coconut oil.

FOSS Tungsten Halogen replacement bulb for Infratec 1241 Grain Analyser; p/n of the bulb is 60023564

Looking for a cellophane cutter for this machine. The (second hand) unit may require repairs (this is ok). This cutter is compatible with various Sollas models, including the Mini, 17, 20, and others.

Horizontal powder filler with auger to pack 1kg to 15kg

500/1000L Ribbon Blender (Ideally Winkworth but other good manufacturer considered

Sauce filling machine to fill 5L - 10L

150L Cooking Pot (Gas/Electric)
1000L Cooking Vessel with mixer/stirrers

We require 1ton or 2 ton per hour Spray dried Oil base Laundry soap plant -- Pls send details.

Nordenmatic 602 or Nordenmatic 702

P800 of interest but also FORMIGA P110 Velocis, P1 ATEX; any EOS printing equipment

Two door autoclave with counter pressure that will hold two full pallets

Do you have any filling line with 400 VPM with Lyo 40 sq mtr.

400 to 800 sq. ft.

1 Steam e-boiler max 5 t/h ~4 MW, 1 Steam boiler +/- 6,5 ton/hr 7 barg Natural Gas, 1 HTHW Hybrid boiler (Electric and gas fired pass 4MW), 1 HTHW boiler 5 MW (130°C) Natural Gas, 1 HTHW e-boiler max 4 MW T (130°C), Biogas burner

Customer looking ONLY for Leibinger Ink Jet Printers

Looking for an aluminium lid feeder for a can filling line. Currently using a linear feeder which is not optimal for their line. We are interested for revolver type …

I’m looking for a xenon arc (UV) testing machine, with humidity and temp control. This is to do rapid aging testing on our products.

- Q-Sun XE3 preferred as has humidity control
- Q-Sun XE1 – if you found one, I would consider it

Tunnel pasteurizer required. Comparable to Petek Process TKO-1-12000-02 Heating Tunnel

Filler for can line – 25,000 pcs/h (or more)
Filler must be capable to work with sleek cans
Working mainly with 0,5 l cans and 0,33

IMA C28 tea bagging machine (ideally with cartoner)

Customer looking for an IMA C24E (not any previous model)

Silverson high shear mixer - L2/air model

HOF Freeze & Thaw agnostic unit

Gerteis Mini-Pactor OEB3

semi-auto filler, 2 head, heated hopper, viscous product

Ulma Galaxy Automatic Stretch Film Tray Wrapper

Rotary stack for caps (dia 200 and 202, for aluminium cans), compatibile with KHS Innofil Can C (with Ferrum capping)

SPX Votator. 6" x 72"

Customer looking for Rotospray equipment - ideally from Comcast but will look at all offered.

24 head multihead, multipond type of thing. Two rows of twelve heads stacked on each other. Ideal for packaging wet pasta, (tortelloni)