Listing# 636482

Waters Acquity Hclass UPLC

Seller's Acceptable Currency:

€55,000.00 EUR

Make An Offer

Location:  Europe

Level of Removal:  Already Skidded/Banded

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

Equipment Description

Waters Acquity Hclass UPLC


Manufacturer: WATERS

Model: Acquity H-Class

Year: 2015

Dwell volume: < 400 �L

Integrated leak management: Leak sensors and safe leak handling

Settable flow rate range: 0.010 to 2.2 mL/min

Cycle time: < 30s inject-to-inject

UPLC equipped with:

-������� QSM module

-������� SM-FTN module

-������� CMP module

-������� Column heater module

-������� PDA detector

-������� Solvent tray

QSM module: Quaternary solvent manager

-������� Model: UPQSM

-������� Serial number: E14QSM530A

-������� Number of solvents: Blend up to four solvents in any combination

-������� Solvent degassing: Integrated vacuum degassing, four chambers

-������� Solvent blending: Automated, On-line pH, ionic strength

-������� Gradient formation: Low-pressure mixing, quaternary gradient

-������� Primary check valve: Intelligent intake valve

-������� Flow accuracy: 1.0% at 0.5 to 2.0 mL/min using 100% A. back pressure 600 to 1000 psi with degassed H2O.

-������� Baseline noise: < 1.0 mAu

-������� Composition accuracy: 0.5% absolute from 5% to 90% from 0.5 to 2.0 mL/min

-������� Compressibility compensation: Automatic and continuous

-������� Priming: Wet priming can run at flow rates up to 4 mL/min

-������� Pump seal wash: Equipped with an automated wash system to flush the rear of the high pressure seal and the plunger

-������� Flow ramping:

o�� Range: 0.01 to 30.00 min to reach 2.0 mL/min

o�� Default: 0.45 min to reach 2.0 mL/min

-������� Power: 100/240VAC, 50/60Hz, 360VA

FTN module: Sample manager FTN

-������� Model: UPSMFTN

-������� Serial number: D14SDI337G

-������� Injection volume range: 0.1 to 10.0 �L as standard in 0.1 �L increments

-������� Accuracy aspiration: 0.2 �L

-������� Linearity: > 0.999 for standard needle

-������� Precision:

o�� < 1% RSD 0.2 to 1.9 �L

o�� < 0.5% RSD 2.0 to 10.0 �L

-������� Number of sample plates:

o�� 96 and 384 microtiter plates

o�� 48 position 2.00 mL vial plates

o�� 48 position 0.65 mL micro-centrifuge tube plates

o�� 24 position 1.50 mL micro-centrifuge tube plates

-������� Sample compartment�: 4.0 to 40.0�C, settable in 0.1�C increments

-������� Temperature accuracy: 0.5�C

-������� Temperature stability: 1.0�C

-������� Injection needle wash: Integral, active, programmable

-������� Minimum sample required: 3 �L residual

-������� Advanced sample manager capabilities: Auto-dilution, auto-addition and load-ahead

-������� Power: 100/240VAC, 50/60Hz, 400VA

Column compartment module: CMP

-������� Model: UPCMA

-������� Serial number: D14CMP317G

-������� Switching valves: Two injector-style, seven port, six positions, switching valves, left and right, waste and bypass position

-������� Column compartment: Accommodates up to four columns, in parallel

-������� Column size: 20 to 150mm length x 2.1 to 4.6mm internal diameter

-������� Column temperature control: 10.0 to 90.0�C settable in 0.1�C increments

-������� Column tracking

-������� Compartment operational temperature range: 15�C below ambient to 90�C

-������� Compartment temperature measuring accuracy: 1.0�C

-������� Power: 100/240VACColumn heater:

-������� Model: CH-30A

-������� Column size: 20 to 300mm length x 2.1 to 7.8mm internal diameter, plus either a guard column or an in-line filter (20mm maximum)

-������� Column temperature range: 4.0 to 65.0�C in 0.1�C increments

-������� Compartment temperature measurement accuracy: 0.8�C

-������� Dimensions (WxDxH): 203x356x552mm, 50/60Hz, 400VA

PDA detector:

-������� Model: UPPDATC

-������� Serial number: E14UPD205A

-������� Wavelength range: 190 to 500 nm

-������� Wavelength accuracy: 1 nm

-������� Linearity range: Deviation at 2.0 AU 5%

-������� Optical resolution: 1.2 nm

-������� Digital resolution: 0.6nm/pixel to 500nm

-������� Drift: 1.0 x 10-3 /AU/hour/�C

-������� Light source: Prealigned, intelligent technology Deuterium lamp

-������� Path length: 10mm

-������� Flow cell volume: 500 nL

-������� Pressure limit: 1000 psi

-������� Dimensions (WxDxH): 343x607x194mm

-������� Power: 100/240VAC, 50/60Hz, 185VA


Manufacturer Name


CE Marked:

Acquity Hclass
Acquity Hclass


39.37 x 39.37 x 47.24 in - 440.92 lb
1000 x 1000 x 1200 MM - 200 KGS


This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in


This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.

Customers who viewed this item also viewed this