1 Lot of 4 off Double AGV Forklift Battery Roller transfer support stations1 Lot of 4 off Double AGV Forklift Battery, Charging Area, Roller support stations, manufactured by Logan Fenamec Ltd.
The 2 sets of battery transfer / support rollers, complete with battery safety stop bar, are mounted on a common frame, supported by 4 legs.
|
| Estimated Shipping Weight | 1200 Kgs LBS | | Height | 0.86 M | | Length | 1.4 M | | Width | 1.1 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
1 Lot of 5 off 48 volt 24 cell 215 Amphour AGV Forklift Batteries and 4 off Laser Targets1 Lot of 5 off 48 volt x 24 cell, 215 Amphour, AGV Forklift Battery's,
1 Set of 4 off Laser Scanner, Wall mounted AGV Positioning Targets, which each measure 190mm x 190mm x 600mm high. |
| Model | 4P ZVB 216 | | Serial Number | 2800180/183/179/182/184 | | Estimated Shipping Weight | 2750 Kgs | | Recommended Packaging Form | CUSTOM PALLET |
|
|
1 Lot of 5 off Hawker Oldham ST 5000 AGV Battery Chargers and 1 off Hawker PowerTech Battery Charger1 Lot of 5 off Hawker Oldham ST 5000 AGV Battery Chargers, floor mounted + 1 off Hawker PowerTech Battery Charger, Wall mounted.
The 1 off 2006, Hawker PowerTech Battery Charger, Wall mounted unit, is a Type BTC3 PWT 48v 060B, Serial No A20061000220, Primary = 400v 3 Phase 50 Hz 7 Amps, Secondary = 48 Volts x 60 Amps, and measures 370mm x 300mm x 570mm high, and weighs 30 kgs
|
| Model | Series ST 5000 | | Serial Number | 1K 1157 / 2K 2355 / 4W 9575 / 1K 1154 / 2K 2357 | | Estimated Shipping Weight | 250 Kgs | | Height | 0.76 M | | Length | 0.5 M | | Width | 0.54 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Caterpillar FMC SGL Automatically Guided Forklift Unit 4 You are making an offer on a Caterpillar FMC, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 4, "Judy" located in GBR.Caterpillar, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 4, "Judy"
This 1999, FMC, Laser guided AGV unit is capable of lifting a Maximum Weight of 1000 kgs, at a Load Centre distance of 600mm from the mast, to a Maximum height of 960mm, using Forklifts that are 1220mm long x 95mm wide, that can be adjusted automatically from 550mm - 980mm apart, measured to the outside of forks.
The Maximum sizings of the load to be lifted are; 1200mm long x 1200mm wide x 1375mm high.
The Maximum travelling speed of the AGV is 1m/sec, but has been down-rated for safety reasons to 0.2m/sec.
The AGV is controlled from a Central Control Computer Scheduling unit, via radio control, and locally guided via a Laser detection system that identifies its position relative to strategically placed Vertical Laser Targets, mounted at a height of 2.2m, throughout the prescribed routes that the AGV's are set to follow.
The AGV is powered by a 48 volt x 24 cell rechargeable battery, that produces a maximum of 215 Amphere/hours, and measures 969mm long x 340mm wide x 540mm high, and weighs 510-550 Kgs.
|
| Model | SGL-C, UK 0079-2001-A | | Serial Number | 801 | | Estimated Shipping Weight | 5250 kgs | | Height | 2.3 M | | Length | 3 M | | Width | 1.6 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Caterpillar SGL Automatic Guided Forklift Unit 1 You are making an offer on a Caterpillar FMC, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 4, "Judy" located in GBR.Caterpillar, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 1, "Faith"
This 1993, Laser guided AGV unit is capable of lifting a Maximum Weight of 1000 kgs, at a Load Centre distance of 600mm from the mast, to a Maximum height of 960mm, using Forklifts that are 1220mm long x 95mm wide, that can be adjusted automatically from 550mm - 980mm apart, measured to the outside of forks. The Model No on the Forklift attachment = 5FF 00209.
The Maximum sizings of the load to be lifted are; 1200mm long x 1200mm wide x 1375mm high.
The Maximum travelling speed of the AGV is 1m/sec, but has been down-rated for safety reasons to 0.2m/sec.
The AGV is controlled from a Central Control Computer Scheduling unit, via radio control, and locally guided via a Laser detection system that identifies its position relative to strategically placed Vertical Laser Targets, mounted at a height of 2.2m, throughout the prescribed routes that the AGV's are set to follow.
The AGV is powered by a 48 volt x 24 cell rechargeable battery, that produces a maximum of 215 Amphere/hours, and measures 969mm long x 340mm wide x 540mm high, and weighs 510-550 Kgs.
Please Note; This unit currently has a problem with its onboard Laser guidance navigation system.
|
| Model | SGL | | Serial Number | 5FF 00200 | | Estimated Shipping Weight | 4960 kgs | | Height | 2.3 M | | Length | 2.9 M | | Width | 1.6 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Caterpillar SGL Automatic Guided Forklift Unit 2 You are making an offer on a Caterpillar FMC, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 4, "Judy" located in GBR.Caterpillar, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 2, "Hope"
This 1993, Laser guided AGV unit is capable of lifting a Maximum Weight of 1000 kgs, at a Load Centre distance of 600mm from the mast, to a Maximum height of 960mm, using Forklifts that are 1220mm long x 95mm wide, that can be adjusted automatically from 550mm - 980mm apart, measured to the outside of forks. The Model No on the Forklift attachment = 5FF 00203.
The Maximum sizings of the load to be lifted are; 1200mm long x 1200mm wide x 1375mm high.
The Maximum travelling speed of the AGV is 1m/sec, but has been down-rated for safety reasons to 0.2m/sec.
The AGV is controlled from a Central Control Computer Scheduling unit, via radio control, and locally guided via a Laser detection system that identifies its position relative to strategically placed Vertical Laser Targets, mounted at a height of 2.2m, throughout the prescribed routes that the AGV's are set to follow.
The AGV is powered by a 48 volt x 24 cell rechargeable battery, that produces a maximum of 215 Amphere/hours, and measures 969mm long x 340mm wide x 540mm high, and weighs 510-550 Kgs.
Please Note; This unit currently is not functionable, and is being used as spares support for the other 3 AGV's.
|
| Model | SGL | | Serial Number | 5FF 00203 | | Estimated Shipping Weight | 4960 kgs | | Height | 2.3 M | | Length | 2.9 M | | Width | 1.6 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Caterpillar SGL Automatic Guided Forklift Unit 3 You are making an offer on a Caterpillar FMC, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 4, "Judy" located in GBR.Caterpillar, Factory based, SGL, Automatically Guided Forklift Product Transfer Unit 3, "Charity"
This 1993, Laser guided AGV unit is capable of lifting a Maximum Weight of 1000 kgs, at a Load Centre distance of 600mm from the mast, to a Maximum height of 960mm, using Forklifts that are 1220mm long x 95mm wide, that can be adjusted automatically from 550mm - 980mm apart, measured to the outside of forks. The Model No on the Forklift attachment = 5FF 00200.
The Maximum sizings of the load to be lifted are; 1200mm long x 1200mm wide x 1375mm high.
The Maximum travelling speed of the AGV is 1m/sec, but has been down-rated for safety reasons to 0.2m/sec.
The AGV is controlled from a Central Control Computer Scheduling unit, via radio control, and locally guided via a Laser detection system that identifies its position relative to strategically placed Vertical Laser Targets, mounted at a height of 2.2m, throughout the prescribed routes that the AGV's are set to follow.
The AGV is powered by a 48 volt x 24 cell rechargeable battery, that produces a maximum of 215 Amphere/hours, and measures 969mm long x 340mm wide x 540mm high, and weighs 510-550 Kgs.
|
| Model | SGL | | Serial Number | 5FF 00209 | | Estimated Shipping Weight | 4960 kgs | | Height | 2.3 M | | Length | 2.9 M | | Width | 1.6 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Caterpillar SGL Master Computer Control System for 4 off Automatic Guided Forklifts Caterpillar, SGL, Master Computer Control System, for 4 off Automatic Guided Forklifts + bespoke Software for the Scheduling control, and Visual Display of the AGV Forklift movements, within the Factory Site.
The Computer Control system is installed in a Digital MicroVAX 3100-30 unit, linked to a Hewlett Packard PC & Monitor, programmed by Agilent Technologies, with the bespoke Caterpillar AGV scheduling programme, which is displayed on a real time updated Visual Displayed PC in the warehouse.
There are Caterpillar Fault Finding & Instruction Manuals available, and in the event of Programme alterations needing to be undertaken, then the Software Support for this system is currently provided by; John Bean Technologies, Lincoln, UK, Contact; Mr L Roy Ferrier, Tel; 0116 264 2250.
The Computer hardware is housed in a Floor mounted wardrobe style, Stainless Steel, Display Cabinet, which measures 650mm deep x 800mm wide x 1950mm high, and weighs approx 300 kgs.
|
| Estimated Shipping Weight | 300 Kgs | | Height | 1.95 M | | Length | 0.65 M | | Width | 0.8 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
Logan Fenamec Ltd AGV Forklift Battery Manual Double Roller Guided Transfer Bogie unitLogan Fenamec Ltd, AGV Forklift Battery, Manual Double Roller Guided Transfer Bogie unit
This unit is fitted with 2 off sets of Battery Safety stops, complete with Manual release levers, and it is guided laterally in front of the 4 off sets of Double Battery Roller Supports stands by means of a floor mounted guide rail, onto which the 2 off rear roller supports engage.
|
| Estimated Shipping Weight | 300 Kgs | | Height | 1.15 M | | Length | 1.36 M | | Width | 1.4 M | | Recommended Packaging Form | CUSTOM PALLET |
|
|
