| |
You are making an offer on a Feldmeier 10 Gallon Mixing Tank located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Model: no tag found
Serial #: no tag found
Stainless steel construction
Mounted on wheels
Top mounted side and bottom sweep agitation
1/2 horsepower SEW euro-drive
Electrics: 230/460volt, 60hz, 3ph, 2.15/1.07amp
Two top lids
Bottom and side discharge ports
Variable speed
Hand rail
Approximate tank dimensions: 14" diameter x 20"straight side
Approximate capacity: 10 gallons / 50 liters- Manufacturer Feldmeier
- Model not found
- National Board # n/a
- Capacity Size 10 GALS
- Products Run Out of service
- Material of Construction STAINLESS STEEL
- Spare/Change Parts N
- Agitation Y
- Top and Bottom Heads FLAT TOP/DISHED BOTTOM
- Length 24 IN
- Height 62 IN
- Diameter 14 IN
- Straight Side 20 IN
- Voltage 230/460 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Manual Available No
- Inspection Allowed No
- Estimated Shipping Weight 500 LBS
- Removal Difficulty EASY
- Requires rigging or removal NO
- Requires a flatbed truck NO
- Level of shipment preparation necessary UNCRATED/LOOSE
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Puerto Rico
Dimensions: 24x62 IN
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store