| |
You are making an offer on a Fryma Mixing / Homogenizing Vessel located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
National Board #: 112
Serial #: 10729
Year of construction: 1990
Certified by Vertrans AG - Basel
Internal working pressure (US): FV/36.26psi @ 302 degrees F.
Internal working pressure (Euro): FV/25 bar @ 150 degrees C.
Jacket MAWP (US): 36.26 psi @ 302 degrees F.
Jacket MAWP (Euro): 2.5 bar @ 150 degrees C.
Approximate tank dimensions: 45" straight side x 52"internal diameter
Approximate capacity: 500 gallon / 1,900 liters
Counter rotating prop agitation with side and bottom scrape (missing drive motors)
Approximate overall dimensions: 9'long x 87"wide x 84"high
- Manufacturer Fryma
- Year 1990
- National Board # 112
- Capacity Size 500 GALS
- Products Run Out of service
- Material of Construction STAINLESS STEEL
- Top and Bottom Heads DISHED TOP/DISHED BOTTOM
- Agitation Y
- Pressure Rating (Temperature) 302 degrees F.
- Pressure Rating (Pressure) 36.26
- Length 9 FT
- Height 84 FT
- Inspection Allowed No
- Estimated Shipping Weight 5,000 LBS
- Removal Difficulty EASY
- Requires rigging or removal NO
- Requires a flatbed truck NO
- Level of shipment preparation necessary UNCRATED/LOOSE
- Additional Component Dimensions Post: 11'long x 36"wide x 40"high
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Puerto Rico
Dimensions: 9x84 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store