| |
You are making an offer on a GREERCO TRIPLE MOTION located in the USA. GREERCO 10 GALLON/50 LITER CAPACITY (WORKING) TRIPLE MOTION AGITATED "AGI MIXER" SERIAL # 089208. FEATURES 316 L STAINLESS STEEL SANITARY WETTED PARTS, SCRAPER AGITATOR WITH SPRING LOADED TEFLON SCRAPER BLADES, COUNTER ROTATING PADDLE AGITATOR, HOMOGENIZING MIXER WITH RELIANCE "XE" DUTY MASTER DIRECT COUPLDED DRIVE @ 3520 RPM, VESSEL IS MANUFACTURED BY JC PARDO AND SONS (BALTIMORE MD) SERIAL # 5816, NATIONAL BOARD RATED (# 2469) FOR FULL VACUUM/15 PSI @ 250 F INTERNAL AND JACKET IS RATED FOR 40 PSIG @ -20 TO 287 F, INDEPENDENT PADDLE DRIVES WITH VARIABLE SPEED CONTROLS, FACTORY CONTROL PANEL WITH DIGITAL DISPLAY, HYDRAULIC TILT OUT WITH AGITATOR POSITION INDICATOR, INTERNAL TEMPERATURE PROBE, FLUSH SEATING BALL VALVE, MOUNTED ON PORTABLE STAINLESS STEEL BASE. - Manufacturer Greerco
- Year 1992
- Model "AGI-MIXER"
- Capacity Size 10 GALS
- Products Run PERSONAL CARE
- Spare/Change Parts N
- Air Requirements 80 PSI
- Manual Available No
- Estimated Shipping Weight 2600 LBS.
- Heating Cooling Requirements STEAM HEATED
- Maintenance Log/Records Available N
- MSDS Available Y
- Length 7 FT
- Width 5 FT
- Height 7 FT
- Diameter 16 IN
- Depth 18 IN
- Voltage 208 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Current 30 AMPS
- Removal Difficulty READY TO SHIP
- Requires rigging or removal NO
- Requires a flatbed truck NO
- Level of shipment preparation necessary UNCRATED/LOOSE
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
USA
Dimensions: 7x5x7 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store