Rate listing info and photo quality
Why?
EquipNet strives to provide quality information to help with Buyer purchasing decisions. Please provide feedback as to how well this equipment is represented to give you the type of both visual and written descriptions that you find helpful in evaluating making an offer to purchase. We use this feedback in a continuous improvement process to constantly elevate our ability to create raving fans from our customers.
Listing #130787
Lot of (3) Unused Endress & Hauser TR-24 Temperature Probe
Equipment Description:
| Lot of (3) Unused Endress & Hauser TR-24 Temperature Probe. The model is TR-24-EA2BXC3000. The probe is 14" long.
The Omnigrad T TR 24 temperature sensor is made up of a measurement probe and a housing
(head), which may contain a transmitter or the terminals on the ceramic block for electrical connection.
The sensor is manufactured according to standards DIN 43729 (housing) and 43735 (probe) and
can therefore guarantee a good adaptability to the most common industrial processes.
The measurement probe consists of a (replaceable) insert in mineral oxide with a diameter of 3 or
6 mm.
The TR 24 can be fitted onto the plant (tube or tank) through the use of a compression fitting,
which can be chosen from the most common models (see section "Structure of the components"),
or it can be inserted into a thermowell
The required type of output signal can be obtained by choosing the correct head-mounted transmitter.
Endress+Hauser supplies "state-of-the-art" transmitters (the iTEMP® series) built in 2-wire
technology and with 4…20 mA output signal, HART® or PROFIBUS-PA®. All of the transmitters
can be easily programmed using a personal computer through the ReadWin® 2000 public
domain software (for transmitters 4…20 mA and HART®) or the Commuwin II software (for PROFIBUS-
PA® transmitters). The HART® transmitters can also be programmed with the hand-held
operating module DXR 275 (Universal HART® Communicator).
A PCP (4…20 mA, TMT 180) model with enhanced accuracy is available.
In the case of PROFIBUS-PA® transmitters, E+H recommends the use of PROFIBUS® dedicated
connectors. The Weidmüller type (Pg 13.5 - M12) is provided as a standard option.
For detailed information about transmitters, please refer to the relevant documentation (refer to
the TI codes at the end of the document).
If a head-mounted transmitter is not employed, the sensor probe can be connected through the
terminal block to a remote converter
The Omnigrad T TR 24 thermometers can be mounted on pipes, vessels or other plant parts that
may be necessary, by means of compression junctions or thermowells.
The absence of the extension neck (situated between the process connection and the head) may
expose the housing to overheating. To ensure that the head temperature does not exceed the limit
values defined in paragraph "Operating conditions", refer to figure 3.
In the case of ATEX-certified components (transmitter, insert), please refer to the relevant documentation
(refer to the code at the end of this document).
Immersion depth may have an effect on the accuracy of the measurement. If the immersion is too
low, an error may be generated in the temperature recorded due to the lower temperature of the
process fluid near to the walls and heat transfer, which takes place through the sensor stem. The
incidence of such an error can be not negligible if there is a big difference between the process
temperature and the ambient temperature. To avoid measurement errors of this kind, it is advisable
to set an immersion length (L) of at least 50÷70 mm (without thermowell). |
Disclaimers: |
|
| This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in Italy. |
|
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Equipment Specifications:
| Manufacturer | Endress & Hauser |
| Model | TR-24 |
| Estimated Shipping Weight | 0 LBS |
