| |
You are making an offer on an Unused Fette PKB3 Tablet Press Die / Chamber Coater located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Model: PKB 3
Serial #: can't get to tag
Stainless steel construction
K-tron Feeder (model: K-PH-CV-KT20) for Magnesium Stearate
Air requirement: minimum 6 bar - maximum 10 bar
Electrics: 230volt, 50/60hz, 3ph
Dosing range from 0.2 - 2 kg per hour
Unit is used for short dusts the compression surfaces (punch tips and dies) with magnesium stearate
For when adhesive products are being tableted. This prevents the product from sticking to the compression tools
Dosage can be either volumetric or gravimetric
Unit was purchased and never put into production
Unit has some slight damage to the Lexan shroud
Siemens PLC with operator interface
Mounted on wheels for ease of movement
- Manufacturer Fette
- Model PKB 3
- Serial Number unknown
- Products Run Unused / out of service
- Manual Available Yes
- Estimated Shipping Weight 700 LBS
- Length 42 IN
- Width 5 FT
- Height 2 FT
- Voltage 230 VOLTS
- Frequency 50/60 HERTZ
- Phase 3
- No. of Stations
- Removal Difficulty EASY
- Requires rigging or removal NO
- Requires a flatbed truck NO
- Level of shipment preparation necessary ALREADY SKIDDED/BANDED
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Georgia
Dimensions: 42x5x2 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
NOTE: Because this listing is a tabletting machine or encapsulation machine, the seller will need to notify the DEA of any transaction involving this machine. They will need to supply the DEA with the Model, Serial number, the buyer company, contact, address, telephone and fax number, and the buyer's tax ID or DEA registration number. The DEA requires 15 business days after payment has been received for this notification to occur before the press can be released for shipment. If you intend to make an offer on this machine you will be required to provide your company's Tax ID or DEA Registration #.
|
Store