Lot 31 Listing# 1046412

Autobag PaceSetter PS 125 Table Top Bagger


You must be logged in to participate in auctions

Log in



Location:

Pheonix, AZ, USA

Event Start Date:

11/3/2026

Invoices Will be Sent:

11/9/2026
All invoice payments are due immediately upon receipt.

Equipment Description
Autobag PaceSetter PS 125 table top bagger, a compact hand-load automatic bagging system used to open, fill and seal pre-opened bags-on-a-roll. The machine is built on the Automated Packaging Systems PS 125 platform (Part No. 597000A1), with a keypad/display control panel on the left side for job setup, an Autothread bag feed, a hinged top sealer assembly with guard, and a drop-down front bag roll cradle with adjustable roll support bars and a scale strip for film alignment. Per the manufacturer's published data, the PS 125 runs at speeds up to 25 bags per minute and handles bag sizes from 2 in to 10.5 in wide by 4 in to 17 in long in 1.0 to 4.0 mil film. The nameplate rates the unit at 95/132 VAC 60 Hz, 5 A at 115 VAC, or 180/264 VAC 50 Hz, 2.7 A at 230 VAC, single phase, with a short-circuit rating of 6.3 A and a machine weight of 82 lbs (37.2 kg). The data plate carries a CE mark and a RoHS label. This unit is serial number PS08 10 639, manufactured August 2010, and came out of a medical device facility, where it carried asset tag 104995. Photos show the machine sitting loose on a pallet with its power cord coiled in the bag roll cradle and no film roll loaded. Condition was not evaluated and the machine was not powered up or run during the site visit; it is offered as-is, where-is.

Specifications:
Standard
Metric

Manufacturer Name

Autobag
 

Serial Number:

PS08 10 639
PS08 10 639

Capacity Speed:

25 BPM
25 BPM

Capacity Details:

Hand-load tabletop bagger, speeds up to 25 bags per minute, film 1.0 to 4.0 mil
Hand-load tabletop bagger, speeds up to 25 bags per minute, film 1.0 to 4.0 mil

Product Sizing:

Bag width 2 in - 10.5 in, bag length 4 in - 17 in
Bag width 2 in - 10.5 in, bag length 4 in - 17 in

Voltage:

115/230 VOLTS
115/230 VOLTS

Frequency:

50/60 HERTZ
50/60 HERTZ

Phase:

1
1

Current:

5 AMPS
5 AMPS

Year:

2010
2010

CE Marked:

YES
YES

Model:

PS 125
PS 125

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

28 x 20 x 26 in - 110 lbs
711.20 x 508.00 x 660.40 mm - 49.90 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.