Online Auction NOV 04-11, 2026
Well-Known Battery Manufacturer Site Closure Auction | R&D and Pilot Plant Equipment Available
From Leading Battery Manufacturer's Research Centers in Connecticut and Massachusetts, Covering the Full Battery Development Workflow; Powder Processing, Pilot Chemistry, Cell Assembly, Materials Characterization, and Cycle Testing. Featuring Maccor, Buchi, Agilent, Rigaku, TA Instruments, Harper and Keysight.
Event Details:
Bidding Starts: November 4, 2026
Lots Begin Closing: November 11, 2026 4:00PM (EST)
Buyer Premium: 19.0%
Location: Massachusetts & Connecticut, USA
Tax/Vat Rate: Varies by Item/Buyer Location
Interested in Pre-Auction Sales? Contact: John Triesch - (781) 821-3482 ext. 8119 - [email protected], for information regarding available pre-auction purchasing opportunities!
Inspections:
By appointment only, when available (48 hours advanced notice required). Click Here to Request
Invoices Will be Sent:
Monday, November 16, 2026
All invoice payments are due immediately upon receipt.
Collection Deadline:
Friday, December 18, 2026
All Equipment NOT collected before deadline, will be considered abandoned without refund.
Pre-Auction Inquiries: Interested in purchasing equipment before the auction? Contact John Triesch for details. P: (781) 821-3482 ext. 8119 | E: [email protected]
Featured Items:
- Charles Ross and Sons PD-2 Planetary Mixer
- Harper International NE-3.5D30-RT-1200 Electric Rotary Furnace
- Proseal CTR Tray or Tub Sealer
- Agilent Technologies 5100 ICP-OES Optical Emissions Spectrometer with SPS 4 Autosampler
- Salon Teknopaja OY FRL2A3 Free Fall Tester
- Chemspeed Technologies Flex-Powerdose Package Gravimetric Solid Dispensing System with Control Unit
- Parr 4536 Floor-stand Reactor with 4843 Temperature Controller
- Buchi AG | Buchiglasuster 13 Liter Jacketed Pilot Plant and Reactor System
- Buchi AG | Buchiglasuster 13 Liter Pilot Plant Nutsche Filter
- Maccor Series 4000 32 Channel Battery Test System
- Processall 4 HL Mixer
- TA Instruments Q5000 Gravimetric Analyzer with DSC Q200 Differential Scanning Calorimeter
Invoices Will be Sent:
Monday, November 16, 2026
All invoice payments are due immediately upon receipt.
Important Notes:
Please Note:- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- This auction has staggered end times. Lots are also subject to “Popcorn Bidding” (for more information please see below.)
- Please pay close attention to the end time of your lot(s) of interest and make sure to refresh your page periodically.
- Removal & Loading fees are also noted where provided by the vendors. Please see item description for more details
- All invoice payments are due immediately upon receipt.
You will receive a link in an email that takes you to our secure website with the appropriate billing information after you log in. Please ensure that it is coming from @equipnet.com and not some version of that address with a different spelling or extension. There has been a recent uptick of scams plaguing e-commerce websites. Please be vigilant. If you have any doubts, please call Michael O’Neil at +1-781-821-3482 extension 3320 to verify the correct information.
Inspections:
By appointment only, when available (48 hours advanced notice required). Click Here to Request
Additional Information:
Payment Methods: Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment.
All invoice payments are due immediately upon receipt.
Popcorn Bidding: If there are any bids within 5 minutes of the close of the auction, the close time for that specific item will be extended in 5 minute increments until there are no bids by the end of the following 5 minute block. There is no limit to the number of times an auction can be extended. Therefore, EquipNet, Inc. recommends that you check back often as an auction nears closing time.
For example: If listing 1234 receives a bid at 4:56pm on Friday (4 minutes before the close of the auction), the close time for that particular lot will be extended to 5:05pm. If that lot receives another bid at 5:04pm, the close time is extended to 5:10pm. If there are no more bids between 5:05pm and 5:10pm, the lot will close at 5:10pm.
Shipping & Removal: Removal & Loading fees are also noted where provided by the vendors. Please see item description for more details. It is the buyer’s responsibility to pay for the removal, packing, shipping, and/or insurance, as required, on items won at the Auction. All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc.
Please be sure to read the Listing description carefully as ALL items sold are subject to a handling fee. Costs may be provided by Seller provided/approved vendors for on-site removals. EquipNet loading charges are figured using industry recognized box & pallet size calculations and as well as the weight of the purchased items. As such, oversized (extra wide/ long or excessively heavy items) may be designated as custom; and will be priced accordingly on the listing. Crating and additional packing services are optionally available, please contact our Logistics Team x2504 for a quote/more details.
If you would like to arrange shipping and packing through EquipNet or would like to pick up the equipment personally, please contact EquipNet Logistics at 781-821-3482 x2504. Pick up appointments and Quotes will be scheduled/requested ONLY after the equipment has been paid for in full.
Popcorn Bidding: If there are any bids within 5 minutes of the close of the auction, the close time for that specific item will be extended in 5 minute increments until there are no bids by the end of the following 5 minute block. There is no limit to the number of times an auction can be extended. Therefore, EquipNet, Inc. recommends that you check back often as an auction nears closing time.
For example: If listing 1234 receives a bid at 4:56pm on Friday (4 minutes before the close of the auction), the close time for that particular lot will be extended to 5:05pm. If that lot receives another bid at 5:04pm, the close time is extended to 5:10pm. If there are no more bids between 5:05pm and 5:10pm, the lot will close at 5:10pm.
Shipping & Removal: Removal & Loading fees are also noted where provided by the vendors. Please see item description for more details. It is the buyer’s responsibility to pay for the removal, packing, shipping, and/or insurance, as required, on items won at the Auction. All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc.
Please be sure to read the Listing description carefully as ALL items sold are subject to a handling fee. Costs may be provided by Seller provided/approved vendors for on-site removals. EquipNet loading charges are figured using industry recognized box & pallet size calculations and as well as the weight of the purchased items. As such, oversized (extra wide/ long or excessively heavy items) may be designated as custom; and will be priced accordingly on the listing. Crating and additional packing services are optionally available, please contact our Logistics Team x2504 for a quote/more details.
If you would like to arrange shipping and packing through EquipNet or would like to pick up the equipment personally, please contact EquipNet Logistics at 781-821-3482 x2504. Pick up appointments and Quotes will be scheduled/requested ONLY after the equipment has been paid for in full.
Mass Auctioneer License AU-2022
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.