Lot 4 Listing# 1046532
Bosch Pack 101 Horizontal Flow Wrapper
Location:
Pheonix, AZ, USA
Event Start Date:
11/10/2026
Invoices Will be Sent:
11/16/2026
All invoice payments are due immediately upon receipt.
Equipment Description
Electrical rating from the nameplate (photo 10): 208-240 V, 60 Hz, single phase, FLA 17 A / 4300 W, largest motor 2 A, short circuit interrupt 200 kA, short circuit current rating 5 kA. Per Bosch's published data for the Pack 101, the machine runs up to 90 packages/min single-up and up to 150 packages/min two-up, with a maximum film speed of 30 m/min. Setup labels on the film backstand (photo 4) note backstand to center line 400 mm and 275 mm film, backstand to edge of film 267 mm.
The unit is configured with a color touchscreen HMI flanked by two digital temperature controllers for the sealing jaws, blue reset and green start buttons, a red stop button and an emergency stop (photos 1 and 3); an overhead film unwind with multiple idler/dancer rollers and a film roll in place; a short infeed/discharge belt conveyor with clear polycarbonate guarding (photo 2); and a long stainless product infeed chain conveyor with adjustable side rails, T-handle adjusters and pneumatic fittings (photos 8 and 9). A side-mounted electrical cabinet with fused main disconnect, filtered cooling vent and a USA panel-shop label is integral to the frame; the machine stands on casters with leveling feet.
The wrapper was removed from a Central Admixture Pharmacy Services facility and carries an asset label with barcode 112248 and a supplier calibration sticker (ID# 112248, dated Apr 07 2026, due Oct 21 2026) shown in photo 7, along with an internal plant tag reading CAPS 1495993 Wrapper, S/N 18-34766 (photo 5). The machine is photographed in a cleared staging room and appears complete; no field notes on operating condition were provided, and the control panel was not powered during the visit.
Specifications:
Manufacturer Name
Model:
Serial Number:
CE Marked:
Capacity Speed:
Product Sizing:
Heating Cooling Requirements:
Voltage:
Frequency:
Phase:
Current:
Capacity Details:
Recommended Packaging Form:
Dimensions:
Overall:
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.