Lot 29 Listing# 1046546

Carrier 39MN14W025BGP11XGE Modular Air Handling Unit


You must be logged in to participate in auctions

Log in



Location:

Pheonix, AZ, USA

Event Start Date:

11/3/2026

Invoices Will be Sent:

11/9/2026
All invoice payments are due immediately upon receipt.

Equipment Description
Carrier 39MN14W025BGP11XGE Aero series modular (semi-custom central station) indoor air handling unit, tagged AHU-11 at the seller's facility. The unit is a double-wall insulated, multi-section assembly that conditions and distributes building supply air; it was installed in a medical device manufacturing facility and is shown connected to duct, hot water and condensate piping. Per the unit nameplate (photo 3), the air handler is configured with (A) a mixing box, (B) a flat filter section with pre-filters (3) 16x20 and (3) 20x20 and main filters (3) 16x20 and (3) 20x20, (C) a hot water coil and plenum rated 300 PSIG maximum operating pressure at 200 F (coil 28MHV224FAA059BRNC), and (D) a blow-thru supply fan section driven by two 5 HP motors, 1800 RPM, 460V/3-phase/60 Hz, FLA/MCA/MOCP 6.6/8.3/10 each, 15.4 maximum continuous amps. Fan 39MBH9FVB31314FCCK, motor 93MS0725BA280X0XSB, VFD 93VFHJH07D21JBXXBX. Serial number 2218U35661. Externally the unit carries an ABB ACH550 HVAC variable frequency drive with keypad display, a fused disconnect at the drive, an Eaton 30A/600V heavy duty safety switch fed from panel 3PPH1 circuits 20, 22, 24, and a control enclosure, all mounted on the casing (photos 1 and 2). Hinged access doors with latch handles are provided at the filter, coil and fan sections. The VFD display was illuminated at the time of the visit. Approximate overall dimensions 180 in L x 62 in W x 68 in H with an estimated shipping weight of 2,800 lbs. The unit is currently installed and ducted; removal requires disconnection of electrical, hydronic and condensate connections and rigging equipment.

Powers On Explanations

ABB HVAC VFD keypad display is lit and showing a running readout with status LEDs illuminated in photo 2.

Specifications:
Standard
Metric

Manufacturer Name

Carrier Corporation
 

Serial Number:

2218U35661
2218U35661

CE Marked:

NO
NO

Model:

39MN14W025BGP11XGE
39MN14W025BGP11XGE

Capacity Size:

10 HP
10 HP

Capacity Speed:

1800 RPM
1800 RPM

Capacity Details:

Sections: mixing box; flat filter section (pre: (3) 16x20, (3) 20x20; main: (3) 16x20, (3) 20x20); hot water coil and plenum, 300 PSIG max operating a
Sections: mixing box; flat filter section (pre: (3) 16x20, (3) 20x20; main: (3) 16x20, (3) 20x20); hot water coil and plenum, 300 PSIG max operating a

Voltage:

460 VOLTS
460 VOLTS

Frequency:

60 HERTZ
60 HERTZ

Phase:

3
3

Current:

15.4 AMPS
15.4 AMPS

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

180 x 62 x 68 in - 2800 lbs
4572.00 x 1574.80 x 1727.20 mm - 1270.08 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.