Lot 8 Listing# 1138329
Cytiva AKTA Pure FPLC Chromatography System with F9-C Fraction Collector and Pump
Location:
Durham, NC, USA
Event Start Date:
10/19/2026
Invoices Will be Sent:
10/27/2026
All invoice payments are due immediately upon receipt.
Equipment Description
Cytiva (GE Healthcare) AKTA Pure FPLC chromatography system, product code 29018224 / code no. 29014830, serial number 2641936, manufactured 2020/06 in Uppsala, Sweden (nameplate, photo 8). The AKTA pure is a bench-top, modular liquid chromatography (FPLC) system used to purify proteins, peptides and nucleic acids from microgram to gram scale, running under UNICORN software from a connected PC. The 29018224 configuration is the AKTA pure 25 platform, with a flow range up to 25 mL/min.
The instrument in the photos is the standard AKTA pure module rack: system pump heads mounted on the lower module rail, inlet valve V9-IN, injection valve V9H-Inj, column valve, outlet valve, pH valve with pH flow cell, conductivity monitor and a UV monitor with flow cell, plus the mixer and the front drip tray and tubing holders (photos 1 and 2). The front control panel with run/pause keys is on the right-hand column, and the main power switch is on the rear panel (photo 3). Nameplate data: 100-240 V, 50/60 Hz, single phase, IP21 protection class, CE marked.
Per the field notes, the system is offered with the computer and consumables: a Dell small-form-factor PC with keyboard and mouse (photo 5) and a Dell flat-panel monitor (photos 4 and 6), plus boxes of consumables including coiled tubing and bagged fittings (photo 7). Assorted capillary tubing, fittings and a UV flow cell holder are also present on and around the unit in photos 1 through 3.
Condition and function were not otherwise documented by the field user; the system was photographed set up on a laboratory bench in an R&D facility and no lit display or power-on test is shown in the photos.
Cytiva (formerly GE Healthcare) Fraction collector F9-C, product no. 29027743, code no. 29015408, a covered cassette-format x-y fraction collector designed for use with AKTA pure chromatography systems in combination with an outlet valve V9-O / V9H-O. It is a benchtop module with a hinged front door and a viewing window, an internal cassette tray and an x-y dispensing head that moves the delivery tubing over the selected vessel position.
Specifications:
Manufacturer Name
Year:
Model:
Serial Number:
CE Marked:
Capacity Speed:
Voltage:
Frequency:
Phase:
Current:
Recommended Packaging Form:
Dimensions:
See all item dimensions
Item #1:
Item #2:
Item #3:
Item #4:
Item #5:
Item #6:
Overall:
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.