Lot 154 Listing# 1046260

LabRepCo LHU-49-HG Futura Ultra Double Glass Door Laboratory Refrigerator


You must be logged in to participate in auctions

Log in



Location:

Philadelphia, PA, USA

Event Start Date:

10/19/2026

Invoices Will be Sent:

10/27/2026
All invoice payments are due immediately upon receipt.

Equipment must be collected during the week of November 16th - 19th. Any equipment not collected during this time period will be considered abandoned. No exceptions.
Equipment Description
LabRepCo Ultra Series LHU-49-HG upright laboratory refrigerator with two self-closing hinged double-pane glass doors and approximately 49 cu. ft. of interior storage. Units of this series are used for the refrigerated storage of media, reagents, buffers, standards and other temperature-sensitive laboratory materials, and are normally operated at about +4 degrees C, with a typical control range of roughly +1 to +10 degrees C. The data plate on this unit (photo 6) reads model LHU-49-HG, serial LRC-9091308-1910, 115 V, 4.5 A, 60 Hz, single phase, 1/4 HP compressor, charged with 3.7 oz of R290 hydrocarbon refrigerant, ETL listed to UL STD 471 and CSA C22.2 No. 120. The cabinet is a painted-steel upright with a microprocessor temperature controller and digital display in a recessed panel behind a clear cover at the base of the unit, LED interior lighting and adjustable coated wire shelving; the interior photos show four to five wire shelves per side. The interior is fitted with a remote temperature monitoring probe/transmitter mounted at the top of the cabinet, and an Elemental Machines monitoring sensor label appears on the header panel. The interior LED lighting appears illuminated in the photos. The unit sits on the floor and is connected by cord to a standard 115 V outlet; the header carries facility labels, a biohazard label and an asset number 42. Contents shown in the photos are not included.

Powers On Explanations

Interior LED light strip and lit interior visible in photos 3 and 4 while the unit is in service with stored materials; no field note on power state.

Specifications:
Standard
Metric

Manufacturer Name

Labrepco
 

Type of Refrigerator:

UPRIGHT
UPRIGHT

Serial Number:

LRC-9091308-1910
LRC-9091308-1910

CE Marked:

NO
NO

Model:

LHU-49-HG
LHU-49-HG

Capacity Size:

49 CU FT
1.39 cu m

Temperature Range:

1 to 10 DEG C
1 to 10 DEG C

Voltage:

115 VOLTS
115 VOLTS

Frequency:

60 HERTZ
60 HERTZ

Phase:

1
1

Current:

4.5 AMPS
4.5 AMPS

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

33 x 55 x 82 in - 600 lbs
838.20 x 1397.00 x 2082.80 mm - 272.16 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.