Lot 152 Listing# 1141529

Lot of 2 NuAire NU-5810 In-VitroCell ES Stacked CO2 Incubators


You must be logged in to participate in auctions

Log in



Location:

Seekonk, MA, USA

Event Start Date:

12/9/2026

Invoices Will be Sent:

12/21/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$25.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment Description
Lot of 2 NuAire NU-5810 In-VitroCell ES Stacked CO2 Incubators

Lot of two NuAire NU-5810 In-VitroCell ES direct-heat CO2 incubators, double-stacked on a caster base, for cell and tissue culture.

Specifications
  • Model NU-5810, item no. NU-5810U-SSRG (nameplate)
  • Nameplate electrical rating: 115 VAC, 50/60 Hz, 1 phase, 10 A total
  • Chamber volume about 7.06 cu ft (200 L) per unit
  • Temperature set-point range 5 to 55 °C, controllable from 5 °C above ambient
  • CO2 control; the door labels show an IR CO2 sensor icon
    Features seen in the photos
  • Color touchscreen controller with a front USB port on each unit
  • Polished stainless steel chamber with removable perforated shelves on adjustable rails
  • Inner glass door with a sample port behind the outer door
  • Rear connection panel on each unit with remote alarm, RS-485 and 4-20 mA outputs, an air inlet, a CO2 inlet (20 PSI), a 115 VAC power inlet and a power switch
  • Side access port on each unit
  • A built-in decontamination cycle, shown by the door caution labels and a 'Remove Sensors Before Decon' label
  • Stacking brackets join the two units, and the stack sits on a caster base
    Condition notes from the photos
  • Both front displays are lit and reading temperature and CO2. Each shows a 'Power Interrupted' message, and the controller clock is not set.
  • A partly removed sticker is still on the lower unit's door.
  • The nameplate year of manufacture is 2023.

  • Powers On Explanations

    Both displays are lit, showing TEMP 29.3 °C / CO2 0.1% (photo 2) and TEMP 28.7 °C / CO2 0.4% (photo 4), each with a 'Power Interrupted' message.

    Specifications:
    Standard
    Metric

    Manufacturer Name

    Nuaire Inc.
     

    Year:

    2023
    2023

    Serial Number:

    217460121322
    217460121322

    Model:

    NU-5810
    NU-5810

    Capacity Size:

    52.85 gal
    200 L

    Temperature Range:

    5 to 55 DEG C
    5 to 55 DEG C

    CO2 Control:

    YES
    YES

    Humidity Control:

    NO
    NO

    Jacketed:

    NO
    NO

    Voltage:

    115 VOLTS
    115 VOLTS

    Frequency:

    50/60 HERTZ
    50/60 HERTZ

    Phase:

    1
    1

    Current:

    10 AMPS
    10 AMPS

    Recommended Packaging Form:

    PALLET
    PALLET


    Dimensions:
    Standard
    Metric

    See all item dimensions

    Item #1:

    27.00 x 27.00 x 38.00 IN - 238.00 LBS
    685.80 x 685.80 x 965.20 mm - 107.96 kg

    Item #2:

    27.00 x 27.00 x 38.00 IN - 237.00 LBS
    685.80 x 685.80 x 965.20 mm - 107.50 kg

    Overall:

    27 x 27 x 76 IN - 475 LBS
    685.80 x 685.80 x 1930.40 mm - 215.46 kg


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.