Lot 304 Listing# 1141910

Lot of Miscellaneous Lab Equipment


You must be logged in to participate in auctions

Log in



Location:

Seekonk, MA, USA

Event Start Date:

12/9/2026

Invoices Will be Sent:

12/21/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$5.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment Description
Lot of Miscellaneous Lab Equipment

Lot of two Invitrogen (Thermo Fisher Scientific) benchtop protein and nucleic acid lab instruments: an E-Gel Power Snap Plus electrophoresis system with its imaging camera, and an iBind Flex Western device.

The lot in the photos is made up of
  • Invitrogen E-Gel Power Snap Plus Electrophoresis Device, REF G9100 (base module with its own small display)
  • Invitrogen E-Gel Power Snap Plus Camera, REF G9200, which snaps onto the base module and has a color touchscreen for setting up runs and viewing and saving gel images
  • Invitrogen iBind Flex Western Device, REF SLF2000, a hands-free sequential lateral flow device for the blocking, antibody and wash steps of western blot immunodetection, with a hinged lid and a status/timer window
  • The E-Gel Power Snap Plus runs precast E-Gel agarose gels and images them in the same instrument, with USB and Ethernet ports on the camera and a USB port on the base
  • The E-Gel base and camera nameplates are dated April 2022 and the units were made in Singapore. The iBind Flex was made in Israel
  • The E-Gel power input on the rear of the unit is marked 48 V DC, 90 W, from an external power adapter
  • The E-Gel nameplates show CE, UKCA and cULus Listed marks, and the base module is rated EN61326 Class A, Group 1
  • All three units are labeled For Research Use Only
  • In photos 1 and 2, the camera touchscreen is lit and shows the Setup Run home screen, and the base module screen reads Camera in operation
  • In photo 3, one side of the E-Gel unit has label residue
    Invitrogen E-Gel Power Snap Plus Electrophoresis Device G9100 with G9200 Camera and Invitrogen iBind Flex Western Device SLF2000 (In Box)

  • Powers On Explanations

    In photos 1-2, the E-Gel Power Snap Plus camera touchscreen is lit on the Setup Run screen and the base display reads 'Camera in operation'.

    Specifications:
    Standard
    Metric

    Manufacturer Name

    Invitrogen
     

    Year:

    2022
    2022

    Serial Number:

    2949022040157 (E-Gel G9100); 2949122040113 (Camera G9200); 1405230065 (iBind Flex SLF2000)
    2949022040157 (E-Gel G9100); 2949122040113 (Camera G9200); 1405230065 (iBind Flex SLF2000)

    CE Marked:

    YES
    YES

    Voltage:

    48 VOLTS
    48 VOLTS

    Current:

    90 WATTS
    90 WATTS

    Recommended Packaging Form:

    12C (12X12X12)
    12C (12X12X12)


    Dimensions:
    Standard
    Metric

    Overall:

    12 x 12 x 12 IN - 20 LBS
    304.80 x 304.80 x 304.80 mm - 9.07 kg


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.