Lot 44 Listing# 1046568

Manitowoc IDT0620A-161 Indigo NXT Ice Machine with SFA192 Ice and Water Dispenser


You must be logged in to participate in auctions

Log in



Location:

Pheonix, AZ, USA

Event Start Date:

11/3/2026

Invoices Will be Sent:

11/9/2026
All invoice payments are due immediately upon receipt.

Equipment Description
Manitowoc IDT0620A-161 Indigo NXT modular ice machine head mounted on a Manitowoc SFA192-161 ice and water dispenser. The air-cooled head produces full dice cube ice at up to approximately 560 lb per 24 hours and sits on a floor-standing dispenser cabinet that stores roughly 120 lb of ice and dispenses both ice and chilled water through a push-pad chute with a removable drip tray and grate. The unit runs on 115 V, 60 Hz, single phase power (ice maker nameplate: 12.2 min. circuit amps, 20 A max fuse/HACR breaker, R410A charge of 19 oz; dispenser nameplate: 115 V, 60 Hz, 1.6 A motor FLA, 15 A max circuit). The machine carries the Indigo NXT easyTouch color control display on the ice maker head, which shows status, service and diagnostic information; in photo 3 the display is lit and reading BIN FULL, so the unit powers up and was in service. Construction is stainless steel exterior panels with gray trim, NSF component listed and UL/cUL listed, with adjustable leg levelers on the dispenser base. The unit was photographed installed in a break/service area of a medical device facility, connected to building water through a wall-mounted Pentair Everpure water filter with a braided supply line and draining to a floor drain; those connections will need to be disconnected before removal. The ice maker head is serial number 1121038593 (manufactured 2023) and the dispenser base carries serial number 1121060042. No accessories beyond the drip tray/grate shown are included, and no service history is available.

Powers On Explanations

Indigo NXT easyTouch display lit in photo 3 showing date/time and 'BIN FULL' status

Specifications:
Standard
Metric

Manufacturer Name

Manitowoc
 

Year:

2023
2023

Serial Number:

1121038593
1121038593

CE Marked:

NO
NO

Model:

IDT0620A-161 / SFA192-161
IDT0620A-161 / SFA192-161

Material of Construction:

STAINLESS STEEL
STAINLESS STEEL

Voltage:

115 VOLTS
115 VOLTS

Frequency:

60 HERTZ
60 HERTZ

Phase:

1
1

Current:

12.2 AMPS
12.2 AMPS

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

31 x 22 x 86 in - 350 lbs
787.40 x 558.80 x 2184.40 mm - 158.76 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.