Lot 10 Listing# 1045589

Pall ForteBio Octet RED96e Label-Free Biolayer Interferometry System


You must be logged in to participate in auctions

Log in



Location:

Philadelphia, PA, USA

Event Start Date:

10/19/2026

Invoices Will be Sent:

10/27/2026
All invoice payments are due immediately upon receipt.

Equipment must be collected during the week of November 16th - 20th. Any equipment not collected during this time period, will be considered abandoned.
Equipment Description
The Pall ForteBio Octet RED96e is a benchtop label-free analysis system that uses Biolayer Interferometry (BLI) to measure biomolecular interactions in real time without fluidics or labels. Dip-and-read biosensors are lowered into a standard 96-well microplate, where the instrument monitors association and dissociation optically, making it suitable for kinetic characterization, affinity ranking, quantitation and concentration determination of proteins, antibodies and other biologics in discovery, process development and QC workflows. The system reads eight channels simultaneously from a 96-well sample plate and a 96-well biosensor tray, both visible on the internal stage in photo 2, with an orbital-shaking, temperature-controlled sample compartment and an 8-position sensor pick-up head on the overhead Z-axis drive. Per the manufacturer's published data the platform operates from 100-120/200-240 VAC, 50/60 Hz at 4 A maximum, and it is run from an external PC with Octet Data Acquisition and Data Analysis software (computer, monitor and software not confirmed as included). The nameplate in photo 3 identifies the unit as an Octet RED96e, serial number FB-90100, built by Pall ForteBio in Fremont, CA, with Nemko/UL 61010 electrical safety and CE marking. The instrument is shown installed on a laboratory bench with the front status indicator illuminated green in photo 1. No accessories, biosensors or sample plates beyond what appears in the photos are documented, and no service or usage history was provided.

Powers On Explanations

Front-panel status indicator illuminated green in photo 1, and an internal LED glow is visible, indicating the instrument was powered up at the time of the visit.

Specifications:
Standard
Metric

Manufacturer Name

Pall Corporation
 

Serial Number:

FB-90100
FB-90100

CE Marked:

YES
YES

Model:

Octet RED96e
Octet RED96e

Voltage:

100-120/200-240 VOLTS
100-120/200-240 VOLTS

Frequency:

50/60 HERTZ
50/60 HERTZ

Phase:

1
1

Current:

4 AMPS
4 AMPS

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

20 x 13 x 18 in - 90 lbs
508.00 x 330.20 x 457.20 mm - 40.82 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.