Lot 6 Listing# 1103094

PDC International R-100-MW Evolution Shrinklabeler Sleever


Sealed Bid

11/12/2026


Register


Bid Packets Must be Received by:  12/10/2026 4:09 PM

Location:   Cerritos , CA, USA

Buyer Premium:   19.0%

Handling Fee:   $100.00 USD


Location:

Cerritos , CA, USA

Event Start Date:

11/12/2026

Invoices Will be Sent:

12/15/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$100.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

NOTICE:

The seller of this equipment requires the buyer to accept sales agreement

Equipment Description
Includes:
  • PDC International R-100-MW Evolution Shrinklabeler Sleever.
  • PDC International KSA70-712 Triple Zone Steam Tunnel.

  • Specifications:
    Standard
    Metric

    Manufacturer Name

    PDC International
     

    Recommended Packaging Form:

    CUSTOM PALLET
    CUSTOM PALLET


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.

    Multi-Listing Includes:

  • PDC International R-100-MW Evolution Shrinklabeler Sleever


  • Back to Top
    Multi-Listing #1046120

    PDC International R-100-MW Evolution Shrinklabeler Sleever


    Equipment Description
    PDC International R-100-MW Evolution Shrinklabeler
  • Sleeve Diameter Range: 1.5 to 6 inches (38mm to 150 mm).
  • Sleeve Height Range: 2.64 to 10 inches (67 to 250 mm).
  • Line speed: 10 tp 100 cpm. (Line speeds vary depending on sleeve diameter and height).
  • Allen bradley {owerflex 4M VFD.
  • Allen Bradley Micrologix 1400 PLC control.
  • Red lion model G306A 5.7in color HMI.
  • Safety interlocked Lexan Guards.
  • Power unwind reel with splicing table.
  • Material out sensor.
  • Film feed jam sensor.
  • Aluminum construction.
  • Aluminum extruded frame.
  • Applied motion stepper and servo motors.
  • Electrical lock out/tag out.
  • Category 2 safety circuit.
  • Tool-less changeover.
  • Metering wheel.
  • Individual door enunciation on HMI.
  • Up stream photo eye-pause machine in the absence of bottles.
  • Skidding and wrapping for shipment.
  • Left to right production flow.

  • Specifications:
    Standard
    Metric

    Manufacturer Name

    PDC International
     

    Model:

    R-100-MW Evolution
    R-100-MW Evolution

    Type of Labeler:

    INLINE
    INLINE

    Application Type:

    BLOW
    BLOW

    Number of Labeling Heads:

    1
    1

    Voltage:

    240 VOLTS
    240 VOLTS

    Frequency:

    60 HERTZ
    60 HERTZ

    Phase:

    3
    3

    Recommended Packaging Form:

    CUSTOM PALLET
    CUSTOM PALLET


    Dimensions:
    Standard
    Metric

    Overall:

    68 x 39 x 100 IN - 3000 LBS
    1727.20 x 990.60 x 2540.00 mm - 1360.80 kg


    Disclaimer:
    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.
    Right of Return Terms:


    Related Services:

    EquipNet supports the full equipment lifecycle—from purchase through delivery, storage, and preparation—so you can move forward with confidence.

    • Global Logistics
    • Storage Solutions
    • Equipment Lifecycle Services
    • Regulatory Compliance Support and Consulting
    • Workplace Safety Programs
    • Safety Documentation
    • FDA Audits & Inspection Readiness
    • Quality & Process Validation
    Contact Us Today
  • PDC International KSA70-712 Triple Zone Steam Tunnel


  • Back to Top
    Multi-Listing #1046121

    PDC International KSA70-712 Triple Zone Steam Tunnel


    Equipment Description
    PDC International KSA70-712 Triple Zone Steam Tunnel
  • Stainless steel housing.
  • 3 pairs of individually adjustable steam pipes.
  • Opening size: 7inW. 12in HT - Everall length 70in.
  • Manually adjustable primary steam regulator.
  • Control package components: Pressure gauges, main shut off valve, primary regulator, steam filter, piloted regulator, shutoff valve and ball valves.
  • Graduated/Scaled adjustments - for repeatable changeovers.
  • Condensate trap.
  • Steam requirement: 100psi at 200lbs/hr, 1in npt connection.
  • Vent requirement: Two 4in diameter ports per tunnel, 125 cfm total, variable speed.
  • Drip pan for area under tunnel.
  • Heavy duty tunnel stand - with adjustable leveling pads.
  • Tunnel conveyor: 20 ft long, 4.5in wide chain, stainless steel closed top frame, variable speed 208/240 VAC 3ph Lenze FD, adjustable product guides, high temperature wear strips, drip trays for the length of the conveyor, blower and wiper for reduced moisture spread, wash down motor and gearbox.
  • Steam venting System - Single 80in steam tunnel: Steam venting/condensate diversion package - to draw excess steam and divert condensate in a controlled manner from steam tunnel including vent blower assembly - 220VAC 3ph. Vent piping, rigid pipe from steam exhaust manifold to vent fan - Vent fan - Variable speed drive - Stainless steel blower housing - Stainless steel welded stand.

  • Specifications:
    Standard
    Metric

    Manufacturer Name

    PDC International
     

    Model:

    KSA70-712
    KSA70-712

    Recommended Packaging Form:

    CUSTOM PALLET
    CUSTOM PALLET


    Disclaimer:
    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.
    Right of Return Terms:


    Related Services:

    EquipNet supports the full equipment lifecycle—from purchase through delivery, storage, and preparation—so you can move forward with confidence.

    • Global Logistics
    • Storage Solutions
    • Equipment Lifecycle Services
    • Regulatory Compliance Support and Consulting
    • Workplace Safety Programs
    • Safety Documentation
    • FDA Audits & Inspection Readiness
    • Quality & Process Validation
    Contact Us Today