Lot 174 Listing# 1141856

Repligen KrosFlo KR1 Peristaltic Pump with Masterflex 900-1893 Pump Head


You must be logged in to participate in auctions

Log in



Location:

Seekonk, MA, USA

Event Start Date:

12/9/2026

Invoices Will be Sent:

12/21/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$10.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment Description
Repligen KrosFlo KR1 Peristaltic Pump with Masterflex 900-1893 Pump Head

This is a Repligen KrosFlo KR1 (Research 1) digital peristaltic pump fitted with a Masterflex 900-1893 L/S pump head. It can run on its own or as an auxiliary pump in KrosFlo TFF systems.

  • The nameplate reads model 3001820, 6-600 RPM, 0.1 HP
  • Electrical: 115/230 VAC, 50/60 Hz, 1 phase, 2.2/1.1 A, with a T3.15 A 250 V fuse
  • The pump head label says to use L/S 13, 14, 16, 25, 17 or 18 tubing
  • The front panel has an LED display, clockwise/counterclockwise direction indicators and key, up/down speed keys, an INT/EXT control key and a power button
  • On the back are a DB-9 remote connector, an IEC power inlet and a rocker power switch
  • The unit is CE, UKCA and ETL marked, RoHS compliant and rated IP33
  • Assembled in the USA by Masterflex LLC (900-2483)
  • Published KR1 flow range is 0.36 to 3,400 mL/min, depending on tubing size
  • In the photos the display is lit and shows an Err message. Another photo shows the digit 8

  • Powers On Explanations

    Front display and direction LED are lit in photos 2-4. The display shows 'Err' in photos 2-3 and '8' in photo 4.

    Specifications:
    Standard
    Metric

    Manufacturer Name

    Repligen
     

    Serial Number:

    0523046252
    0523046252

    CE Marked:

    YES
    YES

    Model:

    KrosFlo Kr1
    KrosFlo Kr1

    Tubing Size:

    L/S 13, 14, 16, 25, 17, 18
    L/S 13, 14, 16, 25, 17, 18

    RPM:

    6-600
    6-600

    Voltage:

    115/230 VOLTS
    115/230 VOLTS

    Frequency:

    50/60 HERTZ
    50/60 HERTZ

    Phase:

    1
    1

    Current:

    2.2/1.1 AMPS
    2.2/1.1 AMPS

    Recommended Packaging Form:

    19C (22X15X13)
    19C (22X15X13)


    Dimensions:
    Standard
    Metric

    Overall:

    10 x 10 x 10 IN - 7 LBS
    254.00 x 254.00 x 254.00 mm - 3.18 kg


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.